aplb EGF Collagen Moisture Cream

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Cyclohexasiloxane
3. Glycerin
4. Ethyl Hexanoate
5. Dipropylene Glycol
6. Methyl Trimethicone
7. Niacinamide
8. Macadamia Ternifolia Seed Oil
9. Stearyl Alcohol
10. Cetearyl Olivate
11. Glyceryl Stearate
12. Sorbitan Olivate
13. Cetearyl Alcohol
14. Hydrolyzed Collagen Extract (10
15. 000Ppm)
16. Stearic Acid
17. Dimethicone/Vinyl Dimethicone Crosspolymer
18. Panthenol
19. Butylene Glycol
20. 1,2-Hexanediol
21. Fucus Vesiculosus Extract
22. Prunella Vulgaris Extract
23. SH-Oligopeptide-1 (1
24. 000Ppt)
25. Pollen Extract
26. Royal Jelly Extract
27. Propolis Extract
28. Hamamelis Virginiana Leaf Extract
29. Nelumbium Speciosum Flower Extract
30. Solanum Melongena Fruit Extract
31. Melaleuca Alternifolia Leaf Extract
32. Squalane
33. Sodium Hyaluronate
34. Pullulan
35. Tranexamic Acid
36. Octyldodecanol
37. Hydrogenated Lecithin
38. Ceramide NP
39. Phytosteryl/Octyldodecyl Lauroyl Glutamate
40. Hydrogenated Polyisobutene
41. Anemarrhena Asphodeloides Root Extract
42. Ascorbic Acid
43. Hippophae Rhamnoides Fruit Extract
44. Beta-Glucan
45. Ethylhexylglycerin
46. Adenosine
47. Arginine
48. Carbomer
49. Acrylates/C10-30 Alkyl Acrylate Crosspolymer
50. Propanediol
51. Hydroxyacetophenone
52. Dipotassium Glycyrrhizate
53. Disodium EDTA
54. Citrus Paradisi Peel Oil
55. Limonene

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of formaldehyde releasersContains siliconesContains essential oilsContains animal-derivedContains EU-26 allergensContains mineral oilContains fragrance

Key ingredients

ANTIPLAQUE

Water

SKIN CONDITIONING - EMOLLIENT

CyclohexasiloxaneMacadamia Ternifolia Seed OilStearyl Alcohol

DENATURANT

Glycerin

FRAGRANCE

Dipropylene Glycol

HAIR CONDITIONING

Methyl Trimethicone

SMOOTHING

Niacinamide

Other ingredients

Ethyl HexanoateCetearyl OlivateGlyceryl StearateSorbitan OlivateCetearyl AlcoholHydrolyzed Collagen Extract (10000Ppm)Stearic AcidDimethicone/Vinyl Dimethicone CrosspolymerPanthenolButylene Glycol1,2-HexanediolFucus Vesiculosus ExtractPrunella Vulgaris ExtractSH-Oligopeptide-1 (1000Ppt)Pollen ExtractRoyal Jelly ExtractPropolis ExtractHamamelis Virginiana Leaf ExtractNelumbium Speciosum Flower ExtractSolanum Melongena Fruit ExtractMelaleuca Alternifolia Leaf ExtractSqualaneSodium HyaluronatePullulanTranexamic AcidOctyldodecanolHydrogenated LecithinCeramide NPPhytosteryl/Octyldodecyl Lauroyl GlutamateHydrogenated PolyisobuteneAnemarrhena Asphodeloides Root ExtractAscorbic AcidHippophae Rhamnoides Fruit ExtractBeta-GlucanEthylhexylglycerinAdenosineArginineCarbomerAcrylates/C10-30 Alkyl Acrylate CrosspolymerPropanediolHydroxyacetophenoneDipotassium GlycyrrhizateDisodium EDTACitrus Paradisi Peel OilLimonene

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Ethyl Hexanoate

Not decoded yet

Dipropylene Glycol

Solvent for essential oils; better humectancy than PEG

Methyl Trimethicone

Methyl trimethicone, light volatile silicone; non-comedogenic, good powder compatibility.

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Macadamia Ternifolia Seed Oil

Macadamia oil, rich in palmitoleic, good penetration; light feel; non-comedogenic.

Stearyl Alcohol

Stearic alcohol; fatty alcohol for emulsion thickening/structure, often blended with soaps, moderate comedogenicity.

Cetearyl Olivate

Natural emulsifier pairing with glucosides; skin-like feel, biodegradable, prone to oxidation requiring light protection

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Sorbitan Olivate

O/W emulsifier, HLB ~15, requires ionic co-surfactant, potential sensitizer.

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

Hydrolyzed Collagen Extract (10

Not decoded yet

000Ppm)

Not decoded yet

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Fucus Vesiculosus Extract

Brown alga extract providing moisture, soothing, and smoothing; gentle with no known sensitization or comedogenic risk.

Prunella Vulgaris Extract

Not decoded yet

SH-Oligopeptide-1 (1

Not decoded yet

000Ppt)

Not decoded yet

Pollen Extract

Pollen extract for skin protection and conditioning; high sensitization risk for pollen-allergic individuals.

Royal Jelly Extract

Royal jelly extract for skin conditioning; contains animal proteins, contraindicated for bee allergies

Propolis Extract

Propolis extract for antimicrobial care; complex composition, potential allergy risk.

Hamamelis Virginiana Leaf Extract

Witch hazel leaf extract for astringency and skin care; common in soothing formulas

Nelumbium Speciosum Flower Extract

Lotus flower extract containing magnolol, skin conditioner; botanical, low concentration use

Solanum Melongena Fruit Extract

Eggplant fruit extract for skin conditioning; watch for batch consistency and potential allergenicity.

Melaleuca Alternifolia Leaf Extract

Tea tree leaf extract for skin conditioning and perfuming; allergen risk requires dilution.

Squalane

Emollient from plants or synthetic; light texture

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Pullulan

Microbial polysaccharide for film forming and thickening; water-soluble film former used in capsules or moisturizing films.

Tranexamic Acid

Tranexamic acid for skin brightening; generally mild at low external doses.

Octyldodecanol

Light emollient/emulsifier at 1-5%; low comedogenic, non-greasy feel, broadly compatible, sensitive-skin friendly.

Hydrogenated Lecithin

Emulsifier from lecithin; stable, used in powder emulsions

Ceramide NP

Ceramide N3 for barrier repair; lipophilic, needs oil phase or emulsion, avoid high standalone use.

Phytosteryl/Octyldodecyl Lauroyl Glutamate

Phytosterol blend for skin conditioning; gentle, barrier-repairing, low irritation.

Hydrogenated Polyisobutene

Hydrogenated polyisobutene; petroleum-derived lubricant forming breathable film; high purity, low irritation/comedogenicity.

Anemarrhena Asphodeloides Root Extract

Anemarrhena asphodeloides root extract, soothing/conditioning; herbal, batch consistency needs validation

Ascorbic Acid

Vitamin C, potent antioxidant requiring acidic environment for stability; oxidizes and discolors easily, needs light and air protection, concentration 1-10%, pure L-ascorbic acid is more irritating.

Hippophae Rhamnoides Fruit Extract

Sea buckthorn fruit extract for skin conditioning; stable at low levels, check phototoxicity at high doses.

Beta-Glucan

Polysaccharide for soothing and hydration; high MW acts on the surface, poor penetration into deep dermis.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Arginine

Arginine for moisturizing/conditioning; amino acid, high biocompatibility, often used in blends.

Carbomer

Gelling thickener requiring neutralization; watch out for ion compatibility

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Hydroxyacetophenone

Hydroxyacetophenone as antioxidant; often boosts Vitamin C, works in acidic pH.

Dipotassium Glycyrrhizate

Dipotassium glycyrrhizinate for moisturizing/soothing; inhibits 5-LOX, water-soluble, for sensitive skin.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Citrus Paradisi Peel Oil

Grapefruit peel oil for fragrance; contains phototoxic furanocoumarins, limit concentration, strict sun protection required

Limonene

Natural fragrance solvent, EU allergen; poor photostability

Related products in this category

• first-aid-beauty First Aid Beauty Ultra Repair Cream Intense Hydration
• lumene Lumene 24H Face Cream For Sensitive Skin
• emina Emina Ms. Pimple Acne Solution Moisturizing Gel
• karine-joncas Karine Joncas Collagen Lift Cream
• pyunkang-yul Pyunkang Yul Ato Mild Sun Cream
• scinic Scinic Cicanoid Cream