eudora Protetor Solar Facial

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Aqua
2. Octocrylene
3. Butyl Methoxydibenzoylmethane
4. Ethylhexyl Salicylate
5. Dibutyl Adipate
6. Phenylbenzimidazole Sulfonic Acid
7. Methyl Methacrylate Crosspolymer
8. Pentylene Glycol
9. Silica
10. Caprylyl Methicone
11. Glyceryl Stearate
12. Ethylhexyl Triazone
13. Triethanolamine
14. Potassium Cetyl Phosphate
15. Sorbitol
16. Diethylamino Hydroxybenzoyl Hexyl Benzoate
17. Dimethicone
18. Aminomethyl Propanol
19. Niacinamide
20. Styrene/Acrylates/Ammonium Methacrylate Copolymer
21. Benzyl Alcohol
22. Caprylyl Glycol
23. Trimethylsiloxysilicate
24. Carnosine
25. Acrylates/C10-30 Alkyl Acrylate Crosspolymer
26. Parfum
27. Sodium Gluconate
28. Acacia Senegal Gum
29. Xanthan Gum
30. Butylene Glycol
31. Phenoxyethanol
32. Laureth-12
33. Ba Sulfate
34. C11-15 Pareth-7
35. Potassium Sorbate
36. Tetrasodium EDTA
37. Citric Acid
38. Benzyl Salicylate
39. Citronellol
40. Limonene
41. Linalool

Highlights

Free of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains siliconesContains alcoholContains EU-26 allergensContains fragranceContains PEGContains essential oils

Formulation view Broad-spectrum sunscreen combo covering UVA and UVB, boosted by niacinamide and humectants. Film-forming polymers ensure adherence. Ideal for daily facial protection. Observation: contains fragrances and silicone thickeners; monitor photostability and residue, sensitive skin may prefer minimal routines.

Key ingredients

SOLVENT

Aqua

LIGHT STABILIZER

OctocryleneButyl MethoxydibenzoylmethaneEthylhexyl SalicylatePhenylbenzimidazole Sulfonic Acid

SKIN CONDITIONING - EMOLLIENT

Dibutyl Adipate

FILM FORMING

Methyl Methacrylate Crosspolymer

SKIN CONDITIONING

Pentylene Glycol

Other ingredients

SilicaCaprylyl MethiconeGlyceryl StearateEthylhexyl TriazoneTriethanolaminePotassium Cetyl PhosphateSorbitolDiethylamino Hydroxybenzoyl Hexyl BenzoateDimethiconeAminomethyl PropanolNiacinamideStyrene/Acrylates/Ammonium Methacrylate CopolymerBenzyl AlcoholCaprylyl GlycolTrimethylsiloxysilicateCarnosineAcrylates/C10-30 Alkyl Acrylate CrosspolymerParfumSodium GluconateAcacia Senegal GumXanthan GumButylene GlycolPhenoxyethanolLaureth-12Ba SulfateC11-15 Pareth-7Potassium SorbateTetrasodium EDTACitric AcidBenzyl SalicylateCitronellolLimoneneLinalool

Skim through

Ingredients explained

Aqua

Solvent, main base; microbial control is critical

Octocrylene

UV-B absorber and photostabilizer; has concentration limits, consider potential coral toxicity and allergenicity for specific groups.

Butyl Methoxydibenzoylmethane

High-potency UVA filter (Parsol MXX); requires stabilizers and UVB blockers.

Ethylhexyl Salicylate

Ethylhexyl salicylate, UVB absorber; volatile, requires combination with UVA filters for broad spectrum.

Dibutyl Adipate

Light ester, solvent and emollient, fresh feel and volatility, non-comedogenic.

Phenylbenzimidazole Sulfonic Acid

UV absorber and light stabilizer; compliant use required, common in sunscreens

Methyl Methacrylate Crosspolymer

MMA crosspolymer for durable water-soluble film; high doses may create occlusion

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Caprylyl Methicone

Volatile silicone, fresh feel, does not absorb oil, used in foundations and cushions.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Triethanolamine

Triethanolamine for buffering; restricted, limit concentration to avoid high pH and irritation

Potassium Cetyl Phosphate

Cetyl phosphate potassium, O/W emulsifier; pH-sensitive, often requires buffering.

Sorbitol

Polyol humectant with strong hygroscopy; tacky at high levels, pair with occlusives; also a solvent or adjuster.

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Aminomethyl Propanol

pH buffer at 0.1–1%; irritating at high levels, avoid direct mixing with strong acids/bases

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Styrene/Acrylates/Ammonium Methacrylate Copolymer

Film-forming and opacifying copolymer; provides a durable, non-tacky surface layer.

Benzyl Alcohol

Mild preservative/solvent at 0.5-1.0%; EU allergen (labeling required), irritation risk if concentrated, avoid in infant/highly sensitive skin.

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Trimethylsiloxysilicate

Silicate powder, oil-absorbing emollient; insoluble, high levels feel powdery.

Carnosine

Dipeptide skin conditioner with antioxidant and buffering properties; used in synergy with other actives.

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Parfum

Fragrance for scent; may contain allergens, caution for sensitive skin, full labeling required.

Sodium Gluconate

Mild chelator, aids skin conditioning; typically used at low levels as auxiliary

Acacia Senegal Gum

Natural film-former and fragrance agent; used for viscosity or film, check purity for allergens

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Laureth-12

Laureth-12, mild emulsifier, potentially comedogenic at high concentrations

Ba Sulfate

Inorganic white powder; used as opacifier and filler; biologically inert.

C11-15 Pareth-7

Not decoded yet

Potassium Sorbate

Preservative effective below pH 6; combinable with sodium benzoate

Tetrasodium EDTA

Chelator removing metal ions to enhance antioxidant and preservative efficacy; very low usage, typically 0.05-0.1%, no direct skincare function.

Citric Acid

Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH

Benzyl Salicylate

UV absorber/light stabilizer, restricted in EU; potential sensitizer, risk assessment needed.

Citronellol

Citronellol for fragrance; EU 26 allergen, labeling required above 0.001%.

Limonene

Natural fragrance solvent, EU allergen; poor photostability

Linalool

Natural fragrance component at ≤0.05%; one of EU 26 allergens, caution for sensitive skin

Related products in this category

• synergie-skin Synergie Skin Suprema-C+ with 20% CMF Tri-acid Complex
• synergie-skin Synergie Skin Vitamin B
• loccitane L´Occitane Aqua Réotier Refreshing Eye Gel
• confianca Confiança Sulfur Soap
• seventyone-percent Seventyone Percent The Blue Lagoon
• florence-by-mills Florence by Mills Spot A Spot