shiseido Radiant Lifting Foundation

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Octinoxate
2. Titanium Dioxide
3. Water
4. Glycerin
5. Dimethicone
6. Butylene Glycol
7. Nylon-12
8. Diethylhexyl Succinate
9. Diphenylsiloxy Phenyl Trimethicone
10. Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone
11. PEG-10 Dimethicone
12. Bis-Butyldimethicone Polyglyceryl-3
13. Polymethyl Methacrylate
14. Tocopheryl Acetate
15. Lavandula Angustifolia Oil
16. Hydroxyproline
17. PEG/PPG-36/41 Dimethyl Ether
18. Cyclomethicone
19. Disteardimonium Hectorite
20. Aluminum Hydroxide
21. Aluminum Distearate
22. Alumina
23. Trisodium EDTA
24. Triethoxycaprylylsilane
25. Polysilicone-2
26. Tocopherol
27. Sodium Metabisulfite
28. Hydrated Silica
29. Barium Sulfate
30. BHT
31. Syzygium Jambos Leaf Extract
32. Methicone
33. Hydrogen Dimethicone
34. Tetradecene
35. Dipentaerythrityl Hexahydroxystearate
36. Tin Oxide
37. Phenoxyethanol
38. Sodium Dehydroacetate
39. Titanium Dioxide
40. Iron Oxides
41. Mica

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of formaldehyde releasersContains siliconesContains PEGContains EU-26 allergensContains essential oilsContains fragranceContains mineral oil

Key ingredients

防晒剂

Octinoxate

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

ANTIPLAQUE

Water

DENATURANT

Glycerin

ANTIFOAMING

DimethiconeDiphenylsiloxy Phenyl Trimethicone

HUMECTANT

Butylene Glycol

SKIN CONDITIONING - EMOLLIENT

Diethylhexyl Succinate

Other ingredients

Nylon-12Lauryl PEG-9 Polydimethylsiloxyethyl DimethiconePEG-10 DimethiconeBis-Butyldimethicone Polyglyceryl-3Polymethyl MethacrylateTocopheryl AcetateLavandula Angustifolia OilHydroxyprolinePEG/PPG-36/41 Dimethyl EtherCyclomethiconeDisteardimonium HectoriteAluminum HydroxideAluminum DistearateAluminaTrisodium EDTATriethoxycaprylylsilanePolysilicone-2TocopherolSodium MetabisulfiteHydrated SilicaBarium SulfateBHTSyzygium Jambos Leaf ExtractMethiconeHydrogen DimethiconeTetradeceneDipentaerythrityl HexahydroxystearateTin OxidePhenoxyethanolSodium DehydroacetateTitanium DioxideIron OxidesMica

Skim through

Ingredients explained

Octinoxate

Water-soluble UVB absorber for sunscreen; concentration limited by regulations, may irritate sensitive skin

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Nylon-12

Not decoded yet

Diethylhexyl Succinate

Succinyl diisobutyrate, lightweight emollient and solvent; good spread, non-comedogenic

Diphenylsiloxy Phenyl Trimethicone

Phenyl trimethicone for anti-foaming and slip; silicone-based, silky feel

Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone

Silicone surfactant at 1–5%; for hair/cleansing, provides smoothness

PEG-10 Dimethicone

Modified silicone for silky feel and shine; PEG structure aids O/W emulsification, used in hair and skin care.

Bis-Butyldimethicone Polyglyceryl-3

Not decoded yet

Polymethyl Methacrylate

PMMA for thickening, suspension, and film; micro-size powder carrier, very low irritation

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Lavandula Angustifolia Oil

Fragrance essential oil, 0.1–1%; contains allergens, patch test required.

Hydroxyproline

Amino acid derivative for humectancy and skin conditioning; supports collagen metabolism, water-soluble, gentle

PEG/PPG-36/41 Dimethyl Ether

PEG/PPG-DME solvent/emollient, aids oil solubility; low viscosity, no specific comedogenic data.

Cyclomethicone

Volatile silicone for light feel; contains D4 restricted by EU, must be <0.1% after 2026

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Aluminum Distearate

Solid soap salt, anticaking and emulsion stabilizer; for powders/creams, provides matte slip

Alumina

Alumina, inorganic abrasive/thickener; nano-grade requires inhalation risk assessment.

Trisodium EDTA

Metal chelator improving formula stability and synergizing preservatives; used at very low levels (<0.1%), control heavy metals.

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Polysilicone-2

Not decoded yet

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Sodium Metabisulfite

Antioxidant/preservative at 0.05–0.2%; irritating for sensitive skin, avoid with oxidizers

Hydrated Silica

Inorganic abrasive and oil absorbent; prone to settling, needs dispersant, high levels increase exfoliation

Barium Sulfate

Inert mineral filler and thickener; not absorbed by skin, avoid dust inhalation in powder processes

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Syzygium Jambos Leaf Extract

Not decoded yet

Methicone

Volatile silicone offering slip and antistatic properties; inert at high purity, check cyclic isomer limits

Hydrogen Dimethicone

Hydrogenated dimethicone for film-forming and slip; low volatility, rich feel for dry skin

Tetradecene

Light liquid oil, solvent/emollient; non-comedogenic, refreshing feel, viscosity control.

Dipentaerythrityl Hexahydroxystearate

Fatty alcohol ester for emulsification and conditioning; high molecular weight.

Tin Oxide

Inorganic mineral pigment providing opacity and suspension; requires skin safety assessment, typically used in sunscreens or powder colorants.

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Sodium Dehydroacetate

Sodium dehydroacetate, preservative <0.5%; restricted for eye, children, and lip use.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Mica

Mineral colorant for pearlescence; heavy metal screening required

Related products in this category

• canmake Canmake Silky Loose Moist Powder
• shiseido Shiseido Synchro Skin Correcting Gelstick Concealer
• canmake Canmake Glow Fleur Cheeks Blush
• shu-uemura Shu Uemura Unlimited Breathable Lasting Fluid Foundation
• shiseido Shiseido Radiant Lifting Foundation
• canmake Canmake Marshmellow Finish Powder