Enough 8 peptide foundation 成份

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Purified Water
2. Cyclopentasiloxane
3. Titanium Dioxide
4. Cyclohexasiloxane
5. Ethylhexyl methoxycinnamate
6. Caprylic/Capric Triglyceride
7. Glycerin
8. Zinc Oxide
9. Cyclomethicone
10. Dimethicone
11. Arbutin
12. Sorbitan sesquioleate
13. Ozokerite
14. Sodium chloride
15. Yellow Iron oxide
16. Sodium Hyaluronate
17. Magnesium Aluminum Silicate
18. Phenoxyethanol
19. Red Iron oxide
20. Black Iron Oxide
21. Methicone
22. Beta-Glucan
23. Adenosine
24. Centella Asiatica Extract

Highlights

Free of alcoholFree of fragranceFree of parabensFree of sulfatesFree of essential oilsFree of formaldehyde releasersContains siliconesContains mineral oil

Key ingredients

溶剂

Purified Water

SKIN CONDITIONING - EMOLLIENT

CyclopentasiloxaneCyclohexasiloxane

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

LIGHT STABILIZER

Ethylhexyl methoxycinnamate

FRAGRANCE

Caprylic/Capric Triglyceride

DENATURANT

Glycerin

ANTIMICROBIAL

Zinc Oxide

Other ingredients

CyclomethiconeDimethiconeArbutinSorbitan sesquioleateOzokeriteSodium chlorideYellow Iron oxideSodium HyaluronateMagnesium Aluminum SilicatePhenoxyethanolRed Iron oxideBlack Iron OxideMethiconeBeta-GlucanAdenosineCentella Asiatica Extract

Skim through

Ingredients explained

Purified Water

Deionized or purified water serving as the formulation solvent base; requires protection from microbial contamination, typically constitutes the majority of the formula.

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Ethylhexyl methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Zinc Oxide

Physical UV filter, 30% max in EU; oily at high levels, pair with oils for feel.

Cyclomethicone

Volatile silicone for light feel; contains D4 restricted by EU, must be <0.1% after 2026

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Arbutin

Tyrosinase inhibitor for whitening; typical use 1-2%, comply with EU restrictions on specific arbutins.

Sorbitan sesquioleate

Non-ionic emulsifier for O/W or W/O systems; moderate emulsification power, often used with co-emulsifiers

Ozokerite

Mineral ozokerite for viscosity and stabilization; derived from mineral oil, highly comedogenic, avoid facial use.

Sodium chloride

Salt for gel viscosity control; used as precipitant in soaps

Yellow Iron oxide

Inorganic yellow pigment for color and coverage; physically stable, generally non-irritating and non-comedogenic in cosmetics.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Magnesium Aluminum Silicate

Oil-absorbing powder at 5–20%; for pressed/powder makeup, high levels may feel heavy

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Red Iron oxide

Iron oxide red, mineral pigment for color; inert, no significant irritation or sensitization.

Black Iron Oxide

Black iron oxide colorant, non-irritating; powder settling/dispersibility needed, low concentration use

Methicone

Volatile silicone offering slip and antistatic properties; inert at high purity, check cyclic isomer limits

Beta-Glucan

Polysaccharide for soothing and hydration; high MW acts on the surface, poor penetration into deep dermis.

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Centella Asiatica Extract

Centella asiatica extract for soothing/repair; low irritation, common in sensitive skin products.