kaine Green Fit Pro Sun

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Dibutyl Adipate
3. Dipropylene Glycol
4. Propanediol
5. Titanium Dioxide
6. Isononyl Isononanoate
7. Diethylamino Hydroxybenzoyl Hexyl Benzoate
8. Panthenol
9. Phenethyl Benzoate
10. 1,2-Hexanediol
11. Polymethylsilsesquioxane
12. Pentylene Glycol
13. Bambusa Vulgaris Water
14. Chlorella Vulgaris Extract
15. Camellia Sinensis Leaf Extract
16. Mentha Suaveolens Leaf Extract
17. Thymus Vulgaris Leaf Extract
18. Hyaluronic Acid
19. Hydrolyzed Hyaluronic Acid
20. Sodium Hyaluronate
21. Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
22. Coco-Caprylate/Caprate
23. Ethylhexyl Triazone
24. Methyl Methacrylate Crosspolymer
25. Polysilicone-15
26. Terephthalylidene Dicamphor Sulfonic Acid
27. Sodium Polyacryloyldimethyl Taurate
28. Polyhydroxystearic Acid
29. Potassium Cetyl Phosphate
30. Sodium Acrylates Crosspolymer-2
31. Tromethamine
32. Aluminum Hydroxide
33. Polyacrylate Crosspolymer-6
34. Stearic Acid
35. Glucose
36. Butylene Glycol
37. Fructooligosaccharides
38. Fructose
39. Polyglyceryl-2 Dipolyhydroxystearate
40. Ethylhexylglycerin
41. Hydroxypropyl Methylcellulose Stearoxy Ether
42. Sodium Polyacrylate
43. Tocopherol
44. Allantoin
45. Ectoin
46. Behenyl Alcohol
47. Disodium EDTA

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains siliconesContains fragranceContains essential oilsContains PEG

Key ingredients

ANTIPLAQUE

Water

SKIN CONDITIONING - EMOLLIENT

Dibutyl Adipate

FRAGRANCE

Dipropylene Glycol

SOLVENT

Propanediol

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

ANTISTATIC

Isononyl IsononanoatePanthenol

LIGHT STABILIZER

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Other ingredients

Phenethyl Benzoate1,2-HexanediolPolymethylsilsesquioxanePentylene GlycolBambusa Vulgaris WaterChlorella Vulgaris ExtractCamellia Sinensis Leaf ExtractMentha Suaveolens Leaf ExtractThymus Vulgaris Leaf ExtractHyaluronic AcidHydrolyzed Hyaluronic AcidSodium HyaluronateBis-Ethylhexyloxyphenol Methoxyphenyl TriazineCoco-Caprylate/CaprateEthylhexyl TriazoneMethyl Methacrylate CrosspolymerPolysilicone-15Terephthalylidene Dicamphor Sulfonic AcidSodium Polyacryloyldimethyl TauratePolyhydroxystearic AcidPotassium Cetyl PhosphateSodium Acrylates Crosspolymer-2TromethamineAluminum HydroxidePolyacrylate Crosspolymer-6Stearic AcidGlucoseButylene GlycolFructooligosaccharidesFructosePolyglyceryl-2 DipolyhydroxystearateEthylhexylglycerinHydroxypropyl Methylcellulose Stearoxy EtherSodium PolyacrylateTocopherolAllantoinEctoinBehenyl AlcoholDisodium EDTA

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Dibutyl Adipate

Light ester, solvent and emollient, fresh feel and volatility, non-comedogenic.

Dipropylene Glycol

Solvent for essential oils; better humectancy than PEG

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Isononyl Isononanoate

Light, low-viscosity ester emollient; excellent spreadability, good for gels and light lotions

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Phenethyl Benzoate

Gentle preservative alternative to parabens with mild fragrance; low irritancy, but possesses minor allergic potential.

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Polymethylsilsesquioxane

Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Bambusa Vulgaris Water

Bambusa vulgaris leaf water extract used primarily for skin conditioning

Chlorella Vulgaris Extract

Algae extract for skin conditioning and antioxidant; typically 1-5%, monitor stability

Camellia Sinensis Leaf Extract

Green tea extract for antioxidant/astringent; contains caffeine, possible irritation in sensitive skin.

Mentha Suaveolens Leaf Extract

Spearmint leaf extract, astringent and soothing; 1–3% typical, menthol may irritate

Thymus Vulgaris Leaf Extract

Thymus vulgaris leaf extract, often contains thymol and other actives; offers antimicrobial and soothing properties; may be irritating or sensitizing, especially for highly sensitive skin

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Hydrolyzed Hyaluronic Acid

Low-MW humectant with superior penetration vs high-MW; 0.1-0.5% typical, hygroscopic, store dry to prevent clumping.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

UV-B absorber, photostable; high purity and low bioaccumulation, check for impurities.

Coco-Caprylate/Caprate

Lightweight mid-chain ester, quick spreading, suitable for oily skin, non-comedogenic.

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Methyl Methacrylate Crosspolymer

MMA crosspolymer for durable water-soluble film; high doses may create occlusion

Polysilicone-15

Not decoded yet

Terephthalylidene Dicamphor Sulfonic Acid

UV absorber and light stabilizer; EU regulated, check max levels and formulation stability

Sodium Polyacryloyldimethyl Taurate

Sodium polyacryloyldimethyl taurate for emulsion stabilization and thickening; ionic polymer, check ion compatibility.

Polyhydroxystearic Acid

Emulsifier and stabilizer at 1–3%; non-ionic, prone to hydrolysis.

Potassium Cetyl Phosphate

Cetyl phosphate potassium, O/W emulsifier; pH-sensitive, often requires buffering.

Sodium Acrylates Crosspolymer-2

Not decoded yet

Tromethamine

pH adjuster, alkaline; precise dosing required

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Polyacrylate Crosspolymer-6

Water-soluble thickener; requires neutralizer, performs best at pH 5–7

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Glucose

Low-MW humectant and buffer; high hygroscopicity requires careful preservation and humidity control.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Fructooligosaccharides

Prebiotic polysaccharide for hydration/skin conditioning; high levels may feel sticky

Fructose

Strong humectant; high levels can increase viscosity and hygroscopicity.

Polyglyceryl-2 Dipolyhydroxystearate

Plant-derived emulsifier, mild feel; for O/W systems, combine with co-emulsifiers

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Hydroxypropyl Methylcellulose Stearoxy Ether

Cellulose derivative for thickening and emulsion stabilization; cold or hot solubility depends on process, confirm dissolution method.

Sodium Polyacrylate

Superabsorbent resin, <1%; gels with electrolytes, ionic strength control required.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Allantoin

Skin soother at 0.5-2%; promotes cell regeneration

Ectoin

Cosmectin and skin protector, enhances skin tolerance; water-soluble, 0.1–5% common, compatible with most systems

Behenyl Alcohol

Fat alcohol emulsifier/thickener at 1-3%; low comedogenic risk, check solubility in strong acid/base systems, add antioxidants.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Related products in this category

• skin-first Skin first Crema Gel SPF 50
• neogen Neogen Daylight Protection Airy Sunscreen SPF50+
• seventyone-percent Seventyone Percent The Sunset
• seventyone-percent Seventyone Percent Eco Sun Spray
• seventyone-percent Seventyone Percent Eco Sun Shield
• apivita Apivita Bee Sun Safe Hydra Protective Sun Filters Hair Oil