ipkn Moist & Firm Bb Cream

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Cyclopentasiloxane
3. Titanium Dioxide
4. Ethylhexyl Methoxycinnamate
5. Ethylhexyl Salicylate
6. Glycerin
7. Zinc Oxide
8. Talc
9. PEG-10 Dimethicone
10. Dipropylene Glycol
11. Hexyl Laurate
12. Isoeicosane
13. Niacinamide
14. Cyclomethicone
15. Disteardimonium Hectorite
16. Iron Oxides
17. Magnesium Sulfate
18. C12-14 Pareth-3
19. Phenoxyethanol
20. Acrylates/Dimethicone Copolymer
21. Methicone
22. Aluminum Hydroxide
23. Iron Oxides
24. Aluminum Stearate
25. Dimethicone/Vinyl Dimethicone Crosspolymer
26. Palmitic Acid
27. Betaine
28. Ethylhexylglycerin
29. Fragrance
30. Tocopheryl Acetate
31. Dimethicone
32. Iron Oxides
33. Triethoxycaprylylsilane
34. Adenosine
35. Aminopropyl Dimethicone
36. Polymethylsilsesquioxane
37. Ceramide 3
38. Collagen
39. Gold
40. Butylene Glycol
41. Onsen-Sui
42. Prunus Serrulata Flower Extract
43. Rice Ferment Filtrate
44. Menthyl Pca
45. Ethyl Menthane Carboxamide

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of essential oilsFree of formaldehyde releasersContains siliconesContains PEGContains mineral oilContains EU-26 allergensContains fragranceContains animal-derived

Key ingredients

ANTIPLAQUE

Water

SKIN CONDITIONING - EMOLLIENT

Cyclopentasiloxane

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

LIGHT STABILIZER

Ethylhexyl MethoxycinnamateEthylhexyl Salicylate

DENATURANT

Glycerin

ANTIMICROBIAL

Zinc Oxide

ABRASIVE

Talc

Other ingredients

PEG-10 DimethiconeDipropylene GlycolHexyl LaurateIsoeicosaneNiacinamideCyclomethiconeDisteardimonium HectoriteIron OxidesMagnesium SulfateC12-14 Pareth-3PhenoxyethanolAcrylates/Dimethicone CopolymerMethiconeAluminum HydroxideIron OxidesAluminum StearateDimethicone/Vinyl Dimethicone CrosspolymerPalmitic AcidBetaineEthylhexylglycerinFragranceTocopheryl AcetateDimethiconeIron OxidesTriethoxycaprylylsilaneAdenosineAminopropyl DimethiconePolymethylsilsesquioxaneCeramide 3CollagenGoldButylene GlycolOnsen-SuiPrunus Serrulata Flower ExtractRice Ferment FiltrateMenthyl PcaEthyl Menthane Carboxamide

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Ethylhexyl Methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Ethylhexyl Salicylate

Ethylhexyl salicylate, UVB absorber; volatile, requires combination with UVA filters for broad spectrum.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Zinc Oxide

Physical UV filter, 30% max in EU; oily at high levels, pair with oils for feel.

Talc

Inorganic mineral powder for texture and oil absorption; must be asbestos-free; fineness affects skin feel and safety, avoid inhalation.

PEG-10 Dimethicone

Modified silicone for silky feel and shine; PEG structure aids O/W emulsification, used in hair and skin care.

Dipropylene Glycol

Solvent for essential oils; better humectancy than PEG

Hexyl Laurate

Light ester emollient for silky feel; 1-5%, monitor oxidative stability

Isoeicosane

Isoleicosane solvent and emollient; mineral oil derivative, low volatility, silky feel, non-comedogenic.

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Cyclomethicone

Volatile silicone for light feel; contains D4 restricted by EU, must be <0.1% after 2026

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Magnesium Sulfate

Bulk agent at 0.1–1%; highly water-soluble, avoid high local concentration.

C12-14 Pareth-3

Not decoded yet

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Acrylates/Dimethicone Copolymer

Silicone copolymer for anti-caking and film formation, gives non-greasy slip.

Methicone

Volatile silicone offering slip and antistatic properties; inert at high purity, check cyclic isomer limits

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Aluminum Stearate

Aluminum stearate used as anticaking, emulsion stabilizer, and viscosity controller; restricted to IV/150 uses, avoid direct contact with acids.

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Palmitic Acid

Palmitic acid for emulsification/emollient; solid fat, high melting point, occlusive.

Betaine

Betaine for mild moisturizing/surfactant; low concentration 1-2% common, high may irritate.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Aminopropyl Dimethicone

Aminomodified silicone; emulsifies well, adds slip and anti-static at 1–5%

Polymethylsilsesquioxane

Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.

Ceramide 3

Ceramide 3 to restore skin barrier and moisturize; used at 0.01–1%, often blended

Collagen

Hydrating conditioning agent; soluble protein used in hair care and toners; forms occlusive layer.

Gold

Gold in nano or microparticle form, for coloring and slip; usage restricted by regulations

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Onsen-Sui

Onsen hot spring water with minerals; mineral content varies, verify heavy metal levels.

Prunus Serrulata Flower Extract

Cherry blossom extract, 0.1-1% typical; low-irritation, patch-test for pollen/plant-allergy prone skin

Rice Ferment Filtrate

Contains amino acids/sugars; improves feel and hydration; fermentation byproducts may cause allergy.

Menthyl Pca

Menthol derivative for hydration and cool feel; low irritation, stinging at high levels

Ethyl Menthane Carboxamide

Cooling agent; immediate tingle, recommend 0.1-0.3% usage

Related products in this category

• avon Avon Mark MagiX Setting Spray
• korres Korres Lip Oil
• makeup-revolution Makeup Revolution Conceal & Define Full Coverage Foundation
• elizabeth-arden Elizabeth Arden Beautiful Color Radiance Blush
• elizabeth-arden Elizabeth Arden High Performance Blurring Loose Powder
• elizabeth-arden Elizabeth Arden Flawless Finish Skincaring Concealer