wonjin-effect Wonjin Effect Medi Hydro Vial Mask

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Glycerin
3. Butylene Glycol
4. Dipropylene Glycol
5. Sodium Hyaluronate Crosspolymer
6. Hydrolyzed Hyaluronic Acid
7. Hydrolyzed Sodium Hyaluronate
8. Hyaluronic Acid
9. Sodium Hyaluronate
10. Hydrolyzed Collagen
11. Xylitylglucoside
12. Xylitol
13. Azulene
14. 1,2-Hexanediol
15. Hydroxyethylcellulose
16. Chlorphenesin
17. Trehalose
18. Ethylhexylglycerin
19. Allantoin
20. Arginine
21. Carbomer
22. Camellia Sinensis Leaf Extract
23. Zingiber Officinale Root Extract
24. Glycyrrhiza Glabra Root Extract
25. Schizandra Chinensis Fruit Extract
26. Coptis Japonica Root Extract
27. Disodium Edta
28. Dipotassium Glycyrrhizate
29. Polyglyceryl-10 Laurate
30. Polyglyceryl-10 Myristate
31. Panthenol
32. Anhydroxylitol
33. Caprylyl Glycol
34. Glucose
35. Pentylene Glycol
36. Fragrance

Highlights

Free of alcoholFree of parabensFree of siliconesFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains animal-derivedContains fragranceContains essential oilsContains EU-26 allergens

Key ingredients

ANTIPLAQUE

Water

DENATURANT

Glycerin

HUMECTANT

Butylene GlycolSodium Hyaluronate Crosspolymer

FRAGRANCE

Dipropylene Glycol

HAIR CONDITIONING

Hydrolyzed Hyaluronic Acid

SKIN CONDITIONING

Hydrolyzed Sodium Hyaluronate

ANTISTATIC

Hyaluronic Acid

Other ingredients

Sodium HyaluronateHydrolyzed CollagenXylitylglucosideXylitolAzulene1,2-HexanediolHydroxyethylcelluloseChlorphenesinTrehaloseEthylhexylglycerinAllantoinArginineCarbomerCamellia Sinensis Leaf ExtractZingiber Officinale Root ExtractGlycyrrhiza Glabra Root ExtractSchizandra Chinensis Fruit ExtractCoptis Japonica Root ExtractDisodium EdtaDipotassium GlycyrrhizatePolyglyceryl-10 LauratePolyglyceryl-10 MyristatePanthenolAnhydroxylitolCaprylyl GlycolGlucosePentylene GlycolFragrance

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Dipropylene Glycol

Solvent for essential oils; better humectancy than PEG

Sodium Hyaluronate Crosspolymer

Crosslinked high-MW HA; forms surface hydrogel for long-lasting hydration, minimal penetration, physical film-forming.

Hydrolyzed Hyaluronic Acid

Low-MW humectant with superior penetration vs high-MW; 0.1-0.5% typical, hygroscopic, store dry to prevent clumping.

Hydrolyzed Sodium Hyaluronate

Low-molecular-weight hyaluronic acid derivative with better penetration and strong hydration; different molecular weights provide hydration at various depths, typical concentration 0.1-1%.

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Hydrolyzed Collagen

Hydrolyzed protein for film-forming and moisture; molecular weight limits penetration, check source for shellfish allergies

Xylitylglucoside

Polyol humectant with high water absorption and fresh feel; often co-used with propylene glycol for enhanced hydration.

Xylitol

Polyol humectant, sweet taste; water-soluble, high hygroscopy, excess draws moisture.

Azulene

Azulene, a natural volatile compound with anti-inflammatory and soothing effects, used in calming serums; requires airtight storage.

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Hydroxyethylcellulose

Water-soluble cellulose ether for thickening and suspension stabilization; sensitive to ions, electrolytes reduce viscosity, use at pH 7-8.

Chlorphenesin

Phenolic antimicrobial; strict EU limits apply, potential allergen, careful dosing required for leave-on products.

Trehalose

Trehalose; mild humectant and stabilizer for proteins/actives; hygroscopic, light skin feel.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Allantoin

Skin soother at 0.5-2%; promotes cell regeneration

Arginine

Arginine for moisturizing/conditioning; amino acid, high biocompatibility, often used in blends.

Carbomer

Gelling thickener requiring neutralization; watch out for ion compatibility

Camellia Sinensis Leaf Extract

Green tea extract for antioxidant/astringent; contains caffeine, possible irritation in sensitive skin.

Zingiber Officinale Root Extract

Root extract for scent and toning; may irritate compromised skin.

Glycyrrhiza Glabra Root Extract

Liquorice root extract for soothing and brightening; batch variability, watch polyphenol interactions

Schizandra Chinensis Fruit Extract

Not decoded yet

Coptis Japonica Root Extract

Coptis root; contains berberine for antibacterial effects, high doses may sensitize, check stability.

Disodium Edta

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Dipotassium Glycyrrhizate

Dipotassium glycyrrhizinate for moisturizing/soothing; inhibits 5-LOX, water-soluble, for sensitive skin.

Polyglyceryl-10 Laurate

Mild non-ionic emulsifier for O/W systems; cetyl ester structure may irritate sensitive skin, use at 0.5-3%.

Polyglyceryl-10 Myristate

Mild emulsifier and emollient; 1-3%, suitable for O/W systems

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Anhydroxylitol

Anhydrous xylitol, potent humectant; high hygroscopicity may cause stickiness at high levels.

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Glucose

Low-MW humectant and buffer; high hygroscopicity requires careful preservation and humidity control.

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Related products in this category

• a-florence-skincare A.Florence Skincare Hydration Booster Mist
• a-florence-skincare A.Florence Skincare Skin Barrier Restoring Oil
• im-from I'm From Mugwort Spot Gel
• im-from I'm From Mugwort Sheet Mask
• im-from I'm From Ginseng Eye Cream (Discontinued)
• pixi Pixi Retinol Eye Cream