MAKEOVER Powerskin Radiant Tinted Moisturizer

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Aqua
2. Cyclopentasiloxane
3. Dimethicone
4. Propanediol
5. Ethylhexyl methoxycinnamate
6. Isopropanol
7. Polymethyl Methacrylate
8. Trehalose
9. PEG/PPG-18/18 dimethicone
10. Sodium chloride
11. Phenoxyethanol
12. Sorbitan Oleate
13. Polymethylsilsesquioxane
14. Tocopheryl Acetate
15. Dimethicone Crosspolymer
16. Allantoin
17. Ethylhexylglycerin
18. Cyclotetrasiloxane
19. Butylene Glycol
20. Dimethiconol
21. Disodium EDTA
22. Vitis Vinifera Peel Extract
23. Triethoxycaprylylsilane
24. Aluminum hydroxide
25. CI 77891
26. CI 77492
27. CI 77491
28. CI 77499

Highlights

Free of fragranceFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains siliconesContains alcoholContains PEG

Key ingredients

SOLVENT

AquaPropanediol

SKIN CONDITIONING - EMOLLIENT

Cyclopentasiloxane

ANTIFOAMING

Dimethicone

LIGHT STABILIZER

Ethylhexyl methoxycinnamate

溶剂，皮肤调理剂

Isopropanol

FILM FORMING

Polymethyl Methacrylate

HUMECTANT

Trehalose

Other ingredients

PEG/PPG-18/18 dimethiconeSodium chloridePhenoxyethanolSorbitan OleatePolymethylsilsesquioxaneTocopheryl AcetateDimethicone CrosspolymerAllantoinEthylhexylglycerinCyclotetrasiloxaneButylene GlycolDimethiconolDisodium EDTAVitis Vinifera Peel ExtractTriethoxycaprylylsilaneAluminum hydroxideCI 77891CI 77492CI 77491CI 77499

Skim through

Ingredients explained

Aqua

Solvent, main base; microbial control is critical

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Ethylhexyl methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Isopropanol

Solvent and volatile drying agent; irritating, flammable, dries skin

Polymethyl Methacrylate

PMMA for thickening, suspension, and film; micro-size powder carrier, very low irritation

Trehalose

Trehalose; mild humectant and stabilizer for proteins/actives; hygroscopic, light skin feel.

PEG/PPG-18/18 dimethicone

PEG/PPG siloxane; emulsifier/thickener; low irrit, watch PEG total conc limits

Sodium chloride

Salt for gel viscosity control; used as precipitant in soaps

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Sorbitan Oleate

Non-ionic emulsifier for oil-in-water systems; plant-derived, check oxidative stability

Polymethylsilsesquioxane

Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Dimethicone Crosspolymer

Crosslinked silicone polymer providing silkiness and viscosity control; for hair and skin; inert but hard to biodegrade.

Allantoin

Skin soother at 0.5-2%; promotes cell regeneration

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Cyclotetrasiloxane

Volatile silicone providing slip; D4 is restricted in EU rinse-off products and requires labeling for leave-on use.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Dimethiconol

Dimethiconol; silicone emollient providing silky feel and reducing friction; moderate comedogenicity, avoid excess.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Vitis Vinifera Peel Extract

Not decoded yet

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Aluminum hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

CI 77891

Titanium dioxide inorganic pigment and UV filter; assess inhalation risk for nano-forms and EU restrictions

CI 77492

Iron oxide red; stable inorganic pigment, non-toxic; ensure dispersion to prevent sedimentation.

CI 77491

Iron oxides red; physical pigment. Coloring and photo-protective, stable and non-irritating.

CI 77499

Inorganic colorant manganese dioxide used in cosmetics; restricted use component subject to regulatory limits.