round-lab ROUND LAB 1025 Dokdo Sun Cream

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Purified Water
2. C12-15 Alkyl Benzoate
3. Titanium Dioxide
4. Methyl Trimethicone
5. Propanediol
6. Cyclohexasiloxane
7. Butylene Glycol
8. Silica
9. Polymethylsilsesquioxane
10. Aluminum Stearate
11. Polyhydroxystearic Acid
12. 1,2-Hexanediol
13. Sea Water
14. Sodium Hyaluronate
15. Hydrolyzed Hyaluronic Acid
16. Sodium Acetylated Hyaluronate
17. Centella Asiatica Extract
18. Chamomile Flower Extract
19. Panthenol
20. Pentylene Glycol
21. Caprylic/Capric Triglycerides
22. Aluminum Oxide
23. Ammonium Acryloyldimethyltaurate/VP Copolymer
24. Polyacrylate Crosspolymer-6
25. Squalane
26. Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
27. Sodium Stearoyl Glutamate
28. Polyisobutene
29. Hydroxypropyl Methylcellulose Stearoxy Ether
30. Stearic Acid
31. Ethylhexylglycerin
32. Xanthan Gum
33. Sorbitan Oleate
34. Caprylyl/Capryl Glucoside
35. T-Butyl Alcohol
36. Rosemary Leaf Oil
37. Tocopherol

Highlights

Free of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains siliconesContains EU-26 allergensContains animal-derivedContains alcoholContains essential oilsContains fragrance

Key ingredients

溶剂

Purified Water

ANTIMICROBIAL

C12-15 Alkyl Benzoate

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

HAIR CONDITIONING

Methyl Trimethicone

SOLVENT

Propanediol

SKIN CONDITIONING - EMOLLIENT

Cyclohexasiloxane

HUMECTANT

Butylene Glycol

ABRASIVE

Silica

Other ingredients

PolymethylsilsesquioxaneAluminum StearatePolyhydroxystearic Acid1,2-HexanediolSea WaterSodium HyaluronateHydrolyzed Hyaluronic AcidSodium Acetylated HyaluronateCentella Asiatica ExtractChamomile Flower ExtractPanthenolPentylene GlycolCaprylic/Capric TriglyceridesAluminum OxideAmmonium Acryloyldimethyltaurate/VP CopolymerPolyacrylate Crosspolymer-6SqualaneSodium Acrylate/Sodium Acryloyldimethyl Taurate CopolymerSodium Stearoyl GlutamatePolyisobuteneHydroxypropyl Methylcellulose Stearoxy EtherStearic AcidEthylhexylglycerinXanthan GumSorbitan OleateCaprylyl/Capryl GlucosideT-Butyl AlcoholRosemary Leaf OilTocopherol

Skim through

Ingredients explained

Purified Water

Deionized or purified water serving as the formulation solvent base; requires protection from microbial contamination, typically constitutes the majority of the formula.

C12-15 Alkyl Benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Methyl Trimethicone

Methyl trimethicone, light volatile silicone; non-comedogenic, good powder compatibility.

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Polymethylsilsesquioxane

Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.

Aluminum Stearate

Aluminum stearate used as anticaking, emulsion stabilizer, and viscosity controller; restricted to IV/150 uses, avoid direct contact with acids.

Polyhydroxystearic Acid

Emulsifier and stabilizer at 1–3%; non-ionic, prone to hydrolysis.

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Sea Water

Natural ingredient with salts; acts as solvent or humectant, high salt content may feel gritty

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Hydrolyzed Hyaluronic Acid

Low-MW humectant with superior penetration vs high-MW; 0.1-0.5% typical, hygroscopic, store dry to prevent clumping.

Sodium Acetylated Hyaluronate

Acetylated HA; modified for hydrophobicity, improved penetration and non-tacky feel compared to standard HA.

Centella Asiatica Extract

Centella asiatica extract for soothing/repair; low irritation, common in sensitive skin products.

Chamomile Flower Extract

Classic soothing/anti-inflammatory extract; prone to browning, keep protected.

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Caprylic/Capric Triglycerides

Common lightweight ester oil; pleasant skin feel, high biocompatibility for moisturizing bases.

Aluminum Oxide

Alumina; inert anti-slip coating or powder carrier; increases friction in makeup to prevent sliding.

Ammonium Acryloyldimethyltaurate/VP Copolymer

Cationic polymer providing suspension, thickening, and conditioning; often paired with anionic thickening systems, low usage, imparts slip.

Polyacrylate Crosspolymer-6

Water-soluble thickener; requires neutralizer, performs best at pH 5–7

Squalane

Emollient from plants or synthetic; light texture

Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Acrylate copolymer for film/thickening; water-soluble, compatible, monitor residual monomers.

Sodium Stearoyl Glutamate

Mild amino-acid surfactant, poor solubility, pairs with fatty alcohols, fine foam.

Polyisobutene

Inert film former and occlusive; increases viscosity, slippery feel, used in lipsticks

Hydroxypropyl Methylcellulose Stearoxy Ether

Cellulose derivative for thickening and emulsion stabilization; cold or hot solubility depends on process, confirm dissolution method.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Sorbitan Oleate

Non-ionic emulsifier for oil-in-water systems; plant-derived, check oxidative stability

Caprylyl/Capryl Glucoside

Caprylyl/capryl glucoside, mild sugar surfactant; low irritation, moderate cleansing

T-Butyl Alcohol

Fast-evaporating solvent; sharp odor and potential irritation at high levels, limit usage

Rosemary Leaf Oil

Antioxidant and scent maskant; allergen risk higher than single oils, evaluate.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Related products in this category

• illiyoon Illiyoon Stretch Skin Cream
• illiyoon Illiyoon Ceramide Ato Water Lotion
• the-face-shop The Face Shop Mascream
• aestura Aestura Atobarrier 365 Lotion
• round-lab ROUND LAB Birch Juice Moisturizing Cleanser
• iunik iUnik Centella Calming Moisture Daily Sunscreen