chifure Make-up Base Milk UV

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Cyclopentasiloxane
3. Triethylhexanoin
4. Diphenylsiloxy Phenyl Trimethicone
5. Alcohol
6. Butylene Glycol
7. Ethylhexyl Methoxycinnamate
8. Nylon-12
9. Isononyl Isononanoate
10. Dimethicone
11. PEG-9 Polydimethylsiloxyethyl Dimethicone
12. Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone
13. Silica
14. Hydrogen Dimethicone/Octyl Silsesquioxane Copolymer
15. Dimethicone/PEG-10/15 Crosspolymer
16. Hydroxyapatite
17. Aluminum Hydroxide
18. Phenoxyethanol
19. Dimethicone/Vinyl Dimethicone Crosspolymer
20. Disodium EDTA
21. Sodium Chloride
22. Stearic Acid
23. Triethoxycaprylylsilane
24. Dipropylene Glycol
25. Disodium Stearoyl Glutamate
26. Sodium Hyaluronate
27. Sodium Citrate
28. BHT
29. Tocopherol
30. Methylparaben
31. Titanium Dioxide
32. Mica
33. Talc
34. Zinc Oxide
35. Iron Oxides
36. Tin Oxide

Highlights

Free of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains siliconesContains fragranceContains alcoholContains PEGContains parabens

Formulation view Sunscreen makeup base with chemical filters and physical powders (TiO2, ZnO). Silicone system delivers silky matte finish; nylon-12 improves spreadability. Alcohol aids volatility. Suitable for pre-makeup application. Formulator observation: combined physical/chemical protection with good powder dispersion; silicone base may burden those with enlarged pores.

Key ingredients

ANTIPLAQUE

Water

SKIN CONDITIONING - EMOLLIENT

Cyclopentasiloxane

HAIR CONDITIONING

Triethylhexanoin

ANTIFOAMING

Diphenylsiloxy Phenyl TrimethiconeAlcohol

HUMECTANT

Butylene Glycol

LIGHT STABILIZER

Ethylhexyl Methoxycinnamate

ANTISTATIC

Isononyl Isononanoate

Other ingredients

Nylon-12DimethiconePEG-9 Polydimethylsiloxyethyl DimethiconePolyglyceryl-3 Polydimethylsiloxyethyl DimethiconeSilicaHydrogen Dimethicone/Octyl Silsesquioxane CopolymerDimethicone/PEG-10/15 CrosspolymerHydroxyapatiteAluminum HydroxidePhenoxyethanolDimethicone/Vinyl Dimethicone CrosspolymerDisodium EDTASodium ChlorideStearic AcidTriethoxycaprylylsilaneDipropylene GlycolDisodium Stearoyl GlutamateSodium HyaluronateSodium CitrateBHTTocopherolMethylparabenTitanium DioxideMicaTalcZinc OxideIron OxidesTin Oxide

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Triethylhexanoin

Light ester for non-greasy feel and fragrance; low allergenicity, high levels can act as solvent

Diphenylsiloxy Phenyl Trimethicone

Phenyl trimethicone for anti-foaming and slip; silicone-based, silky feel

Alcohol

Ethanol for solubility/drying at 5-15%; high conc. is drying/irritating, avoid lip/eye, low residue, balance with humectants.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Ethylhexyl Methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Nylon-12

Not decoded yet

Isononyl Isononanoate

Light, low-viscosity ester emollient; excellent spreadability, good for gels and light lotions

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

PEG-9 Polydimethylsiloxyethyl Dimethicone

PEG-modified silicone with emulsifying and conditioning properties; ensure low dioxane levels in finished goods.

Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone

Water-soluble silicone conditioning agent providing smooth, non-greasy feel; suitable for both hair and skin

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Hydrogen Dimethicone/Octyl Silsesquioxane Copolymer

Not decoded yet

Dimethicone/PEG-10/15 Crosspolymer

Silicone/PEG crosspolymer for film forming and viscosity; low irritation; PEG debate at high conc

Hydroxyapatite

Mineral abrasive/bulking agent; gentle physical exfoliant for oral care.

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Dipropylene Glycol

Solvent for essential oils; better humectancy than PEG

Disodium Stearoyl Glutamate

Amino acid-based mild cleanser with fine foam; water-soluble.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Sodium Citrate

Sodium citrate for buffering and chelating; adjust pH, careful with strong acid reactions.

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Methylparaben

Preservative, narrow spectrum; often combined, check allergen risk and regulatory limits.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Mica

Mineral colorant for pearlescence; heavy metal screening required

Talc

Inorganic mineral powder for texture and oil absorption; must be asbestos-free; fineness affects skin feel and safety, avoid inhalation.

Zinc Oxide

Physical UV filter, 30% max in EU; oily at high levels, pair with oils for feel.

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Tin Oxide

Inorganic mineral pigment providing opacity and suspension; requires skin safety assessment, typically used in sunscreens or powder colorants.

Related products in this category

• skin-first Skin first Crema Gel SPF 50
• neogen Neogen Daylight Protection Airy Sunscreen SPF50+
• seventyone-percent Seventyone Percent The Sunset
• seventyone-percent Seventyone Percent Eco Sun Spray
• seventyone-percent Seventyone Percent Eco Sun Shield
• apivita Apivita Bee Sun Safe Hydra Protective Sun Filters Hair Oil