Dermaceutic sun ceutic 50 成份

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. C12-15 alkyl benzoate
3. Ethylhexyl methoxycinnamate
4. Zinc Oxide
5. Dimethicone
6. Methylene bis-benzotriazolyl tetramethylbutylphenol
7. Diethylamino Hydroxybenzoyl Hexyl Benzoate
8. Glycerin
9. Cyclopentasiloxane
10. Glyceryl Stearate
11. PEG-100 Stearate
12. Titanium Dioxide
13. Phenylbenzimidazole Sulfonic Acid
14. Sorbitan Stearate
15. Cyclohexasiloxane
16. Hydrolyzed wheat protein
17. Aluminum hydroxide
18. Stearic Acid
19. Decyl Glucoside
20. Propylene Glycol
21. Phenoxyethanol
22. Aloe Barbadensis
23. Sucrose cocoate
24. Triethanolamine
25. Stearyl Alcohol
26. Hydrolyzed Algin
27. DMDM Hydantoin
28. Imidazolidinyl Urea
29. Isostearic Acid
30. Triethoxycaprylylsilane
31. Xanthan Gum
32. Disodium EDTA
33. BHT
34. Sodium Hyaluronate

Highlights

Free of alcoholFree of fragranceFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsContains siliconesContains PEGContains formaldehyde releasers

Key ingredients

ANTIPLAQUE

Water

ANTIMICROBIAL

C12-15 alkyl benzoateZinc Oxide

LIGHT STABILIZER

Ethylhexyl methoxycinnamateMethylene bis-benzotriazolyl tetramethylbutylphenolDiethylamino Hydroxybenzoyl Hexyl Benzoate

ANTIFOAMING

Dimethicone

DENATURANT

Glycerin

Other ingredients

CyclopentasiloxaneGlyceryl StearatePEG-100 StearateTitanium DioxidePhenylbenzimidazole Sulfonic AcidSorbitan StearateCyclohexasiloxaneHydrolyzed wheat proteinAluminum hydroxideStearic AcidDecyl GlucosidePropylene GlycolPhenoxyethanolAloe BarbadensisSucrose cocoateTriethanolamineStearyl AlcoholHydrolyzed AlginDMDM HydantoinImidazolidinyl UreaIsostearic AcidTriethoxycaprylylsilaneXanthan GumDisodium EDTABHTSodium Hyaluronate

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

C12-15 alkyl benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Ethylhexyl methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Zinc Oxide

Physical UV filter, 30% max in EU; oily at high levels, pair with oils for feel.

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Methylene bis-benzotriazolyl tetramethylbutylphenol

UV stabilizer (UV-326/328) preventing photo-degradation of formulas; has EU concentration limit, used in sunscreens.

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

PEG-100 Stearate

Non-ionic emulsifier, requires ionics for stability; check PEG for formaldehyde.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Phenylbenzimidazole Sulfonic Acid

UV absorber and light stabilizer; compliant use required, common in sunscreens

Sorbitan Stearate

Non-ionic emulsifier for O/W systems; hydrophobic, requires co-emulsifiers, inert at high purity

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Hydrolyzed wheat protein

Hydrolyzed protein for hair and skin conditioning; potential allergen, use low levels in sensitive products

Aluminum hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Decyl Glucoside

Mild alkyl glucoside, biodegradable; foam stabilizer, thickens with fatty alcohols, low allergenicity.

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Aloe Barbadensis

Aloe vera extract for hydration and soothing; thick at high purity; potential protein allergy

Sucrose cocoate

Non-ionic surfactant, gentle emulsifier, plant-derived, low comedogenic.

Triethanolamine

Triethanolamine for buffering; restricted, limit concentration to avoid high pH and irritation

Stearyl Alcohol

Stearic alcohol; fatty alcohol for emulsion thickening/structure, often blended with soaps, moderate comedogenicity.

Hydrolyzed Algin

Hydrolyzed algin, water-soluble film former; boosts moisture retention, low viscosity contribution

DMDM Hydantoin

Formaldehyde-releasing preservative (V/33 limit); monitor cumulative formaldehyde with fragrances.

Imidazolidinyl Urea

Formaldehyde releaser in preservative systems; monitor for formaldehyde and urea sensitivity issues.

Isostearic Acid

Fatty acid derivative as emulsifier auxiliary and emollient; insoluble, requires homogenization, may feel slightly greasy

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture