NEORETIN Gelcream SPF 50 成份

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Aqua
2. Dimethyl isosorbide
3. Butylene Glycol
4. C12-15 alkyl benzoate
5. Titanium Dioxide
6. Polysilicone-15
7. Glycerin
8. Bis-ethylhexyloxyphenol methoxyphenyl triazine
9. Butyl Methoxydibenzoylmethane
10. Glyceryl Stearate
11. PEG-100 Stearate
12. Isoamyl laurate
13. Diethylhexyl butamido triazone
14. Dipropylene glycol dibenzoate
15. C14-22 alcohols
16. C12-20 Alkyl Glucoside
17. Ethylhexyl Triazone
18. Caprylyl Glycol
19. Hydroxypinacolone Retinoate
20. Retinol
21. Phenoxyethanol
22. Propylene Glycol
23. Kojic Acid
24. Trisodium Ethylenediamine Disuccinate
25. Dimethylmethoxy Chromanyl Palmitate
26. Hydrolyzed Caesalpinia Spinosa Gum
27. Caesalpinia Spinosa Gum
28. PPG-15 STEARYL ETHER BENZOATE
29. Tocopheryl Acetate
30. Tetrahexyldecyl Ascorbate
31. Hexylene Glycol
32. Pentylene Glycol
33. Fructose
34. Acetyl Hexapeptide-37
35. Lactitol
36. Caprylic/Capric Triglyceride
37. Acrylates/C10-30 alkyl acrylate crosspolymer
38. Sodium carbomer
39. Trehalose
40. Sorbitol
41. Methyl Gluceth-20
42. Methylsilanol hydroxyproline aspartate
43. Sodium Metabisulfite
44. Dimethicone
45. Lecithin
46. Palmitoyl hydroxypropyltrimonium amylopectin/glycerin crosspolymer
47. Xanthan Gum
48. Polysorbate 20
49. Hydrogenated lecithin
50. Parfum

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of essential oilsFree of formaldehyde releasersContains PEGContains mineral oilContains siliconesContains animal-derivedContains EU-26 allergensContains fragrance

Key ingredients

SOLVENT

AquaDimethyl isosorbide

HUMECTANT

Butylene Glycol

ANTIMICROBIAL

C12-15 alkyl benzoate

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

DENATURANT

Glycerin

HAIR CONDITIONING

Bis-ethylhexyloxyphenol methoxyphenyl triazine

LIGHT STABILIZER

Butyl Methoxydibenzoylmethane

Other ingredients

Polysilicone-15Glyceryl StearatePEG-100 StearateIsoamyl laurateDiethylhexyl butamido triazoneDipropylene glycol dibenzoateC14-22 alcoholsC12-20 Alkyl GlucosideEthylhexyl TriazoneCaprylyl GlycolHydroxypinacolone RetinoateRetinolPhenoxyethanolPropylene GlycolKojic AcidTrisodium Ethylenediamine DisuccinateDimethylmethoxy Chromanyl PalmitateHydrolyzed Caesalpinia Spinosa GumCaesalpinia Spinosa GumPPG-15 STEARYL ETHER BENZOATETocopheryl AcetateTetrahexyldecyl AscorbateHexylene GlycolPentylene GlycolFructoseAcetyl Hexapeptide-37LactitolCaprylic/Capric TriglycerideAcrylates/C10-30 alkyl acrylate crosspolymerSodium carbomerTrehaloseSorbitolMethyl Gluceth-20Methylsilanol hydroxyproline aspartateSodium MetabisulfiteDimethiconeLecithinPalmitoyl hydroxypropyltrimonium amylopectin/glycerin crosspolymerXanthan GumPolysorbate 20Hydrogenated lecithinParfum

Skim through

Ingredients explained

Aqua

Solvent, main base; microbial control is critical

Dimethyl isosorbide

Dimethyl isosorbide as solvent and viscosity control; low toxicity, common use

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

C12-15 alkyl benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Polysilicone-15

Not decoded yet

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Bis-ethylhexyloxyphenol methoxyphenyl triazine

UV-B absorber, photostable; high purity and low bioaccumulation, check for impurities.

Butyl Methoxydibenzoylmethane

High-potency UVA filter (Parsol MXX); requires stabilizers and UVB blockers.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

PEG-100 Stearate

Non-ionic emulsifier, requires ionics for stability; check PEG for formaldehyde.

Isoamyl laurate

Lightweight ester emollient; fast-drying, non-greasy feel, suitable for oily skin or summer formulations

Diethylhexyl butamido triazone

Tinosorb S UV filter for UVA; low skin irritancy, photostable, use in sun care formulations.

Dipropylene glycol dibenzoate

Non-ionic emulsifier/emollient with humectant properties; viscous liquid.

C14-22 alcohols

Fatty alcohol blend for emulsion stability and texture; may contain myristyl alcohol, moderate comedogenic risk.

C12-20 Alkyl Glucoside

Non-ionic surfactant for mild cleansing and emulsification; plant-based glucoside, suitable for sensitive and baby skin.

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Hydroxypinacolone Retinoate

Water-soluble retinoate ester; gentler metabolism booster than retinol, stable, suitable for sensitive users at low levels

Retinol

Highly active and unstable, needs robust antioxidant encapsulation; 0.1-1.0%, pregnancy contraindicated

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Kojic Acid

Tyrosinase inhibitor for whitening; EU limit 1% in water, unstable and requires light protection, potential irritation.

Trisodium Ethylenediamine Disuccinate

Mild chelator replacing EDTA; water-soluble, very low irritation, stabilizes metal ions

Dimethylmethoxy Chromanyl Palmitate

Synthetic antioxidant (Chromanol) for potent anti-photoaging; used under 1% to stabilize lipid antioxidants.

Hydrolyzed Caesalpinia Spinosa Gum

Hydrolyzed Gum Acacia, natural colloid for thickening and conditioning, low comedogenic.

Caesalpinia Spinosa Gum

Caesalpinia spinosa gum; film former and moisturizer; plant-based thickener, gentle; for gels and emulsions.

PPG-15 STEARYL ETHER BENZOATE

Oil-soluble solubilizer and emollient; bridges essential oils into aqueous systems, 1–5%.

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Tetrahexyldecyl Ascorbate

Lipophilic Vitamin C derivative, antioxidant and brightening; more stable than VC, oil-soluble, must pair with oil phase

Hexylene Glycol

Polyol solvent and humectant with penetration enhancement; limit concentration to avoid irritation, no specific allergen tag

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Fructose

Strong humectant; high levels can increase viscosity and hygroscopicity.

Acetyl Hexapeptide-37

Acetyl Hexapeptide-37; peptide active for skin appearance and firmness. Control concentration for stability; protect with antioxidant system.

Lactitol

Sorbitan-based polyol humectant at 3–10%; gentle, compatible with alcohols; slight tack at high levels.

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Acrylates/C10-30 alkyl acrylate crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Sodium carbomer

Carbomer sodium, strong gelling agent; requires neutralization, high thickening power, may interact with cationic actives.

Trehalose

Trehalose; mild humectant and stabilizer for proteins/actives; hygroscopic, light skin feel.

Sorbitol

Polyol humectant with strong hygroscopy; tacky at high levels, pair with occlusives; also a solvent or adjuster.

Methyl Gluceth-20

Not decoded yet

Methylsilanol hydroxyproline aspartate

Not decoded yet

Sodium Metabisulfite

Antioxidant/preservative at 0.05–0.2%; irritating for sensitive skin, avoid with oxidizers

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Lecithin

Phospholipid emulsifier at 1-5%; biocompatible, moisturizing/antioxidant, prone to oxidation (add TBHQ), mild for sensitive skin.

Palmitoyl hydroxypropyltrimonium amylopectin/glycerin crosspolymer

Cationic modified starch for conditioning and suspension; balance charge at high use.

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Polysorbate 20

Non-ionic emulsifier and cleansing surfactant; contains PEG, control microbial load.

Hydrogenated lecithin

Emulsifier from lecithin; stable, used in powder emulsions

Parfum

Fragrance for scent; may contain allergens, caution for sensitive skin, full labeling required.