is-clinical iS Clinical Eclipse Spf50+ Translucent

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Titanium Dioxide
2. Zinc Oxide
3. 1,2-Hexanediol
4. Acrylates/C10-30 Alkyl Acrylate Crosspolymer
5. Alumina
6. Butylene Glycol
7. C12-15 Alkyl Benzoate
8. Caprylic/Capric Triglyceride
9. Caprylyl Glycol
10. Cetearyl Alcohol
11. Cetearyl Glucoside
12. Disodium EDTA
13. Dimethicone
14. Glyceryl Stearate
15. Methicone
16. Octyldodecyl Neopentanoate
17. PEG-100 Stearate
18. Polyhydroxystearic Acid
19. Sorbitan Laurate
20. Styrene/Acrylates Copolymer
21. Tocopherol
22. Tocopheryl Acetate
23. Triethoxycaprylylsilane
24. Vp/Eicosene Copolymer
25. Water/Aqua/Eau
26. Xanthan Gum
27. Iron Oxides

Highlights

Free of alcoholFree of fragranceFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains siliconesContains PEG

Key ingredients

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

ANTIMICROBIAL

Zinc OxideC12-15 Alkyl Benzoate

SKIN CONDITIONING

1,2-Hexanediol

EMULSION STABILISING

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

ABRASIVE

Alumina

HUMECTANT

Butylene Glycol

FRAGRANCE

Caprylic/Capric Triglyceride

Other ingredients

Caprylyl GlycolCetearyl AlcoholCetearyl GlucosideDisodium EDTADimethiconeGlyceryl StearateMethiconeOctyldodecyl NeopentanoatePEG-100 StearatePolyhydroxystearic AcidSorbitan LaurateStyrene/Acrylates CopolymerTocopherolTocopheryl AcetateTriethoxycaprylylsilaneVp/Eicosene CopolymerWater/Aqua/EauXanthan GumIron Oxides

Skim through

Ingredients explained

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Zinc Oxide

Physical UV filter, 30% max in EU; oily at high levels, pair with oils for feel.

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Alumina

Alumina, inorganic abrasive/thickener; nano-grade requires inhalation risk assessment.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

C12-15 Alkyl Benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

Cetearyl Glucoside

Gentle non-ionic sugar-based emulsifier for low-irritation formulas; often co-blended

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Methicone

Volatile silicone offering slip and antistatic properties; inert at high purity, check cyclic isomer limits

Octyldodecyl Neopentanoate

Ester emollient; light oil feel; low irrit, low comed, good for fresh systems

PEG-100 Stearate

Non-ionic emulsifier, requires ionics for stability; check PEG for formaldehyde.

Polyhydroxystearic Acid

Emulsifier and stabilizer at 1–3%; non-ionic, prone to hydrolysis.

Sorbitan Laurate

O/W emulsifier; low-comedogenic ester, verify emulsion stability.

Styrene/Acrylates Copolymer

Film former and opacifier for powder makeup; some batches contain sensitizing monomers.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Vp/Eicosene Copolymer

Water-soluble film former and thickener; no known irritancy or comedogenic issues.

Water/Aqua/Eau

Primary aqueous solvent and carrier; no specific incompatibilities, focus on microbial stability.

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Related products in this category

• a-florence-skincare A.Florence Skincare Hydration Booster Mist
• a-florence-skincare A.Florence Skincare Skin Barrier Restoring Oil
• im-from I'm From Mugwort Spot Gel
• im-from I'm From Mugwort Sheet Mask
• im-from I'm From Ginseng Eye Cream (Discontinued)
• pixi Pixi Retinol Eye Cream