nip-fab Nip+Fab Post Glycolic Fix Moisturiser

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Aqua
2. Octocrylene
3. Ethylhexyl Methoxycinnamate
4. Caprylic/Capric Triglyceride
5. Benzophenone-3
6. Butyl Methoxydibenzoylmethane
7. Glycerin
8. Polymethylsilsesquioxane
9. Titanium Dioxide
10. Glyceryl Stearate Se
11. Tapioca Starch
12. Hdi/Trimethylol Hexyllactone Crosspolymer
13. Butylene Glycol
14. Phenoxyethanol
15. Sodium Stearoyl Glutamate
16. Stearic Acid
17. Butyrospermum Parkii Butter
18. Niacinamide
19. Benzyl Alcohol
20. Hamamelis Virginiana Water
21. Polyhydroxystearic Acid
22. Polyacrylamide
23. Xanthan Gum
24. Limonene
25. Parfum
26. Alumina
27. Aluminum Stearate
28. C13-14 Isoparaffin
29. Disodium Edta
30. Tocopheryl Acetate
31. Benzyl Benzoate
32. Alcohol
33. Silica
34. Dehydroacetic Acid
35. Laureth-7
36. Geraniol
37. Butylphenyl Methylpropional
38. Citral
39. Linalool
40. Citric Acid

Highlights

Free of parabensFree of sulfatesFree of formaldehyde releasersContains siliconesContains alcoholContains EU-26 allergensContains essential oilsContains fragranceContains mineral oilContains PEG

Formulation view Sunscreen moisturizer mixing physical (TiO2) and chemical filters for broad-spectrum protection. Oil phase uses light esters and shea butter; aqueous phase has glycerin. Polymers improve spreadability. Suitable for all skin types. Factory view focuses on filter photostability and pigment suspension uniformity.

Key ingredients

SOLVENT

Aqua

LIGHT STABILIZER

OctocryleneEthylhexyl MethoxycinnamateButyl Methoxydibenzoylmethane

FRAGRANCE

Caprylic/Capric Triglyceride

DENATURANT

Glycerin

OPACIFYING

Polymethylsilsesquioxane

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

Other ingredients

Benzophenone-3Glyceryl Stearate SeTapioca StarchHdi/Trimethylol Hexyllactone CrosspolymerButylene GlycolPhenoxyethanolSodium Stearoyl GlutamateStearic AcidButyrospermum Parkii ButterNiacinamideBenzyl AlcoholHamamelis Virginiana WaterPolyhydroxystearic AcidPolyacrylamideXanthan GumLimoneneParfumAluminaAluminum StearateC13-14 IsoparaffinDisodium EdtaTocopheryl AcetateBenzyl BenzoateAlcoholSilicaDehydroacetic AcidLaureth-7GeraniolButylphenyl MethylpropionalCitralLinaloolCitric Acid

Skim through

Ingredients explained

Aqua

Solvent, main base; microbial control is critical

Octocrylene

UV-B absorber and photostabilizer; has concentration limits, consider potential coral toxicity and allergenicity for specific groups.

Ethylhexyl Methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Benzophenone-3

Not decoded yet

Butyl Methoxydibenzoylmethane

High-potency UVA filter (Parsol MXX); requires stabilizers and UVB blockers.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Polymethylsilsesquioxane

Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Glyceryl Stearate Se

Emulsifier at 1–3%; oil-phase ingredient, easy emulsification, low sensitization.

Tapioca Starch

Tapioca starch; powder thickener/oil absorbent; inert, mild comed risk at high conc

Hdi/Trimethylol Hexyllactone Crosspolymer

Hydrophobic wax for anti-caking; improves slip in powders and cushions

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Sodium Stearoyl Glutamate

Mild amino-acid surfactant, poor solubility, pairs with fatty alcohols, fine foam.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Butyrospermum Parkii Butter

Shea butter for occlusive moisturizing; high melt point, rich texture, caution for oily skin.

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Benzyl Alcohol

Mild preservative/solvent at 0.5-1.0%; EU allergen (labeling required), irritation risk if concentrated, avoid in infant/highly sensitive skin.

Hamamelis Virginiana Water

Hamamelis water; tannins/flavonoids for astringent and soothing; low conc, generally well-tolerated

Polyhydroxystearic Acid

Emulsifier and stabilizer at 1–3%; non-ionic, prone to hydrolysis.

Polyacrylamide

Film former and thickener for slip and feel; acrylamide monomer residue risk, strict QC required, restriction III/66

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Limonene

Natural fragrance solvent, EU allergen; poor photostability

Parfum

Fragrance for scent; may contain allergens, caution for sensitive skin, full labeling required.

Alumina

Alumina, inorganic abrasive/thickener; nano-grade requires inhalation risk assessment.

Aluminum Stearate

Aluminum stearate used as anticaking, emulsion stabilizer, and viscosity controller; restricted to IV/150 uses, avoid direct contact with acids.

C13-14 Isoparaffin

Light hydrocarbon solvent providing emolliency and solubility; non-allergenic, note occlusive nature

Disodium Edta

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Benzyl Benzoate

Chelating agent for stability; restricted substance, not permitted as single component or in mixtures at ≥0.1%.

Alcohol

Ethanol for solubility/drying at 5-15%; high conc. is drying/irritating, avoid lip/eye, low residue, balance with humectants.

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Dehydroacetic Acid

Broad-spectrum preservative for acidic and oil-based systems; has concentration limits, requires challenge testing.

Laureth-7

Mild non-ionic surfactant for emulsification and solubilization; biodegradable

Geraniol

Geraniol for fragrance; EU 26 allergen, labeling required above 0.001%.

Butylphenyl Methylpropional

Synthetic fragrance with floral notes; EU regulations limit usage, strict monitoring required.

Citral

Citral; citrus fragrance component, listed EU allergen, high phototoxicity risk, strict concentration limits apply.

Linalool

Natural fragrance component at ≤0.05%; one of EU 26 allergens, caution for sensitive skin

Citric Acid

Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH

Related products in this category

• alverde alverde Face Oil Gesichts-Öl Bio Wildrose
• lerbolario L'Erbolario Aromatic Linden Flower Water
• lvly LVLY Soft Cleansing Foam
• garnier Garnier Bio Purifying Gel Wash With Fresh Lemongrass
• lvly LVLY Day Cream With Manuka Honey Extract
• labo Labo Fillerina Olhos E Lábios 2