milva White Clay Shampoo
milva MILVA White Clay Shampoo lists 11 ingredients on its label, 11 decoded. See what each one does, its irritancy and comedogenic tendency, and its status in national inventories.
Ingredients overview
Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.
Ingredients are listed in label order; the order reflects the label only, not exact concentrations.
Highlights
Free of alcoholFree of parabensFree of siliconesFree of mineral oilFree of formaldehyde releasersContains sulfatesContains EU-26 allergensContains fragranceContains essential oils
Formulation view SLES-based shampoo with betaine to reduce irritation. Kaolin absorbs excess oil for a fresh feel. Preserved with MIT/CMIT, requiring strict dosage control. Suitable for oily scalps. Formulator's note: Kaolin may settle over time; viscosity modifiers are needed to ensure uniform texture and prevent irritation.
Key ingredients
- SOLVENT
- Aqua
- CLEANSING
- Sodium Laureth Sulfate
- ABRASIVE
- Kaolin
- ANTISTATIC
- Cocamidopropyl Betaine
- BULKING
- Sodium Chloride
- HUMECTANT
- Propylene Glycol
- FRAGRANCE
- Parfum
- BUFFERING
- Citric Acid
Other ingredients
Skim through
| Ingredient | What it does | Irr. · Com. | Rating |
|---|---|---|---|
| Aqua | SOLVENT | 0 · 0 | Green |
| Sodium Laureth Sulfate | CLEANSING, SURFACTANT - EMULSIFYING, FOAMING, SURFACTANT - CLEANSING | 2 · 0 | Green |
| Kaolin | ABRASIVE, ABSORBENT, ANTICAKING, BULKING, COLORANT, OPACIFYING · 限制 IV/119 | 0 · 0 | Green |
| Cocamidopropyl Betaine | ANTISTATIC, CLEANSING, SURFACTANT - FOAM BOOSTING, HAIR CONDITIONING, SURFACTANT - CLEANSING, VISCOSITY CONTROLLING, SKIN CONDITIONING - MISCELLANEOUS | 0 · 0 | Green |
| Sodium Chloride | BULKING, FRAGRANCE, ORAL CARE, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Propylene Glycol | HUMECTANT, FRAGRANCE, SOLVENT, VISCOSITY CONTROLLING, SKIN CONDITIONING - HUMECTANT, SKIN CONDITIONING - MISCELLANEOUS | 1 · 0 | Green |
| Parfum | FRAGRANCE, PERFUMING | 2 · 0 | Yellow |
| Citric Acid | BUFFERING, CHELATING, FRAGRANCE | 1 · 0 | Green |
| Methylchloroisothiazolinone | PRESERVATIVE · 限制 V/39 | 2 · – | Yellow |
| Methylisothiazolinone | PRESERVATIVE · 限制 V/57 V/39 | 5 · 0 | Yellow |
| Limonene | DEODORANT, SOLVENT, PERFUMING · 限制 III/88 III/167 III/168 | 1 · – | Yellow |
Ingredients explained
- Aqua
- Solvent, main base; microbial control is critical
- Sodium Laureth Sulfate
- Common anionic surfactant, strong foam but drying; check cationic compatibility, high eye irritation
- Kaolin
- Kaolin absorbent and bulk for powders/masks; check for heavy metals and comply with EU colorant limits IV/119
- Cocamidopropyl Betaine
- Cocamidopropyl betaine; zwitterionic co-surfactant reducing irritation and boosting foam, common in mild cleansers.
- Sodium Chloride
- Salt for gel viscosity control; used as precipitant in soaps
- Propylene Glycol
- Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.
- Parfum
- Fragrance for scent; may contain allergens, caution for sensitive skin, full labeling required.
- Citric Acid
- Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH
- Methylchloroisothiazolinone
- Preservative (MCI); highly sensitizing, use only in rinse-off, avoid leave-on products.
- Methylisothiazolinone
- Strong preservative; high allergy risk, EU restricted for leave-on products, high formulation risk
- Limonene
- Natural fragrance solvent, EU allergen; poor photostability
Source: full ingredient list published on the product label, collected 2026-09-21. Ratings are our internal reading, not a regulatory conclusion. · Product page
Want to build one like this? Send an enquiry