Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Dibutyl Adipate
3. Water
4. Terephthalylidene Dicamphor Sulfonic Acid
5. Water
6. 1,2-Hexanediol
7. Panax Ginseng Root Extract
8. Sodium Dna
9. Butyloctyl Salicylate
10. Ethylhexyl Triazone
11. Polyglyceryl-3 Distearate
12. Niacinamide
13. Drometrizole Trisiloxane
14. Polymethylsilsesquioxane
15. Diethylamino Hydroxybenzoyl Hexyl Benzoate
16. Panthenol
17. Water
18. Citric Acid
19. Tromethamine
20. Dibutyl Adipate
21. Poly C10-30 Alkyl Acrylate
22. Pentylene Glycol
23. Glyceryl Stearate
24. Water
25. Methylpropanediol
26. 1,2-Hexanediol
27. Polyether-1
28. Propanediol
29. Biosaccharide Gum-1
30. Pentylene Glycol
31. Ethylhexylglycerin
32. 1,2-Hexanediol
33. Caprylyl Methicone
34. Silica
35. Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
36. Propanediol
37. Potassium Cetyl Phosphate
38. Carbomer
39. Acrylates/C10-30 Alkyl Acrylate Crosspolymer
40. Ethylhexylglycerin
41. Tocopherol
42. Xanthan Gum
43. Adenosine
44. Glycerin
45. Water
46. Camellia Japonica Seed Extract
47. 3-O-Ethyl Ascorbic Acid
48. Water
49. 1,2-Hexanediol
50. Panax Ginseng Root Extract
51. Sodium Dna
52. Zinc Hydrolyzed Hyaluronate
53. Hyaluronic Acid
54. Sodium Hyaluronate
55. Water
56. Butylene Glycol
57. 1,2-Hexanediol
58. Dimethylsilanol Hyaluronate
59. Hydrolyzed Hyaluronic Acid
60. Hydrolyzed Sodium Hyaluronate
61. Sodium Hyaluronate
62. Hyaluronic Acid
63. Sodium Hyaluronate Crosspolymer
64. Hydroxypropyltrimonium Hyaluronate
65. Sodium Acetylated Hyaluronate
66. Sodium Hyaluronate Dimethylsilanol
67. Ectoin
68. Panthenol
69. Propanediol
70. Water
71. Solidago Virgaurea Extract
72. Eugenia Caryophyllus Bud Extract
73. 1,2-Hexanediol
74. Water
75. Propanediol
76. Buddleja Officinalis Flower Extract
77. Glycerin
78. Water
79. Dipeptide Diaminobutyroyl Benzylamide Diacetate

Highlights

Free of fragranceFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains siliconesContains alcohol

Formulation view Aqueous base with light esters, niacinamide, and plant extracts for skin conditioning. Multi-component UV filters combined with silicone polymers for smooth, matte finish. Preservative system uses polyols. Suitable for commuting and combination skin. Factory note: Ozokerite has high acne risk; strict dosage control required for facial use.

Key ingredients

ANTIPLAQUE

WaterWaterWater

SKIN CONDITIONING - EMOLLIENT

Dibutyl AdipatePanax Ginseng Root Extract

LIGHT STABILIZER

Terephthalylidene Dicamphor Sulfonic Acid

SKIN CONDITIONING

1,2-HexanediolSodium Dna

Other ingredients

Butyloctyl SalicylateEthylhexyl TriazonePolyglyceryl-3 DistearateNiacinamideDrometrizole TrisiloxanePolymethylsilsesquioxaneDiethylamino Hydroxybenzoyl Hexyl BenzoatePanthenolWaterCitric AcidTromethamineDibutyl AdipatePoly C10-30 Alkyl AcrylatePentylene GlycolGlyceryl StearateWaterMethylpropanediol1,2-HexanediolPolyether-1PropanediolBiosaccharide Gum-1Pentylene GlycolEthylhexylglycerin1,2-HexanediolCaprylyl MethiconeSilicaBis-Ethylhexyloxyphenol Methoxyphenyl TriazinePropanediolPotassium Cetyl PhosphateCarbomerAcrylates/C10-30 Alkyl Acrylate CrosspolymerEthylhexylglycerinTocopherolXanthan GumAdenosineGlycerinWaterCamellia Japonica Seed Extract3-O-Ethyl Ascorbic AcidWater1,2-HexanediolPanax Ginseng Root ExtractSodium DnaZinc Hydrolyzed HyaluronateHyaluronic AcidSodium HyaluronateWaterButylene Glycol1,2-HexanediolDimethylsilanol HyaluronateHydrolyzed Hyaluronic AcidHydrolyzed Sodium HyaluronateSodium HyaluronateHyaluronic AcidSodium Hyaluronate CrosspolymerHydroxypropyltrimonium HyaluronateSodium Acetylated HyaluronateSodium Hyaluronate DimethylsilanolEctoinPanthenolPropanediolWaterSolidago Virgaurea ExtractEugenia Caryophyllus Bud Extract1,2-HexanediolWaterPropanediolBuddleja Officinalis Flower ExtractGlycerinWaterDipeptide Diaminobutyroyl Benzylamide Diacetate

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Dibutyl Adipate

Light ester, solvent and emollient, fresh feel and volatility, non-comedogenic.

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Terephthalylidene Dicamphor Sulfonic Acid

UV absorber and light stabilizer; EU regulated, check max levels and formulation stability

Water

Primary solvent and base; requires preservative system to prevent microbial growth

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Panax Ginseng Root Extract

Botanical extract for skin and hair conditioning; activity and irritation risk vary by source/purity, patch test for sensitive skin

Sodium Dna

Water-soluble polymer for hydration and film feel; often claimed for repair support

Butyloctyl Salicylate

Oil-soluble exfoliating emollient; avoid for aspirin-sensitive users and high-concentration leave-on products

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Polyglyceryl-3 Distearate

Polyglyceryl-3 distearate; natural-origin emulsifier; mild, suitable for sensitive skin, oil phase stable.

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Drometrizole Trisiloxane

UVB sunscreens agent; limited by EU, must be used within strict limits.

Polymethylsilsesquioxane

Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Citric Acid

Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH

Tromethamine

pH adjuster, alkaline; precise dosing required

Dibutyl Adipate

Light ester, solvent and emollient, fresh feel and volatility, non-comedogenic.

Poly C10-30 Alkyl Acrylate

Synthetic thickener and emulsion stabilizer for gels or emulsions; generally inert to skin; watch residual monomers.

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Methylpropanediol

Diol solvent and extraction carrier; enhances solubility of actives, low irritation profile.

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Polyether-1

Not decoded yet

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Biosaccharide Gum-1

Biosaccharide Gum-1, fermented colloid for hydration and soothing, low comedogenic.

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Caprylyl Methicone

Volatile silicone, fresh feel, does not absorb oil, used in foundations and cushions.

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

UV-B absorber, photostable; high purity and low bioaccumulation, check for impurities.

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Potassium Cetyl Phosphate

Cetyl phosphate potassium, O/W emulsifier; pH-sensitive, often requires buffering.

Carbomer

Gelling thickener requiring neutralization; watch out for ion compatibility

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Camellia Japonica Seed Extract

Camellia seed extract containing oleic acid and saponins; mild antioxidant and conditioning agent

3-O-Ethyl Ascorbic Acid

Water-soluble Vitamin C derivative; more stable than ascorbic acid, sensitive to metals and alkali.

Water

Primary solvent and base; requires preservative system to prevent microbial growth

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Panax Ginseng Root Extract

Botanical extract for skin and hair conditioning; activity and irritation risk vary by source/purity, patch test for sensitive skin

Sodium Dna

Water-soluble polymer for hydration and film feel; often claimed for repair support

Zinc Hydrolyzed Hyaluronate

Zinc-crosslinked hydrolyzed hyaluronic acid with bioactivity and soothing effects; monitor pH and ionic strength impact on functional salt.

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Dimethylsilanol Hyaluronate

Silicone-modified HA, moisturizing/plumping 0.1-2%; smooth, non-tacky

Hydrolyzed Hyaluronic Acid

Low-MW humectant with superior penetration vs high-MW; 0.1-0.5% typical, hygroscopic, store dry to prevent clumping.

Hydrolyzed Sodium Hyaluronate

Low-molecular-weight hyaluronic acid derivative with better penetration and strong hydration; different molecular weights provide hydration at various depths, typical concentration 0.1-1%.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Sodium Hyaluronate Crosspolymer

Crosslinked high-MW HA; forms surface hydrogel for long-lasting hydration, minimal penetration, physical film-forming.

Hydroxypropyltrimonium Hyaluronate

Cationic hyaluronic acid, 0.1–1%; water-soluble thickener and conditioning agent.

Sodium Acetylated Hyaluronate

Acetylated HA; modified for hydrophobicity, improved penetration and non-tacky feel compared to standard HA.

Sodium Hyaluronate Dimethylsilanol

Modified HA offering smoothing and hydration; note silanol impact on texture

Ectoin

Cosmectin and skin protector, enhances skin tolerance; water-soluble, 0.1–5% common, compatible with most systems

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Solidago Virgaurea Extract

Botanical skin conditioner offering antioxidant and soothing benefits at low levels.

Eugenia Caryophyllus Bud Extract

Clove bud extract, rich in eugenol, for skin conditioning and mild antioxidant/preservative; irritation risk at high levels, control dosage

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Buddleja Officinalis Flower Extract

Buddleja extract, UV-filtering; data limited, sensitization caution, pregnancy

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Dipeptide Diaminobutyroyl Benzylamide Diacetate

Dipeptide skin conditioner for moisturizing and repair; low concentration, minimal irritation or comedogenic risk.

Related products in this category

• biafine Biafine Total Emulsion
• boiron-laboratories Boiron Laboratories HOMEOPLASMINE
• lucas-papaw-remedies Lucas’ Papaw Remedies Lucas’ Papaw Ointment
• mother-dirt Mother Dirt AO+ Mist Live Probiotic Spray
• abdiibrahim Abdiibrahim Acnelyse
• necessaire Nécessaire The Sex Gel (Fragrance-Free)