sisley Phyto-Blush Twist

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Isononyl Isononanoate
2. Polyethylene
3. Caprylic/Capric Triglyceride
4. Dimethicone
5. Methyl Methacrylate Crosspolymer
6. Polymethyl Methacrylate
7. Aluminum Starch Octenylsuccinate
8. Silica
9. Microcrystalline Wax/Cire Microcristalline
10. Stearalkonium Bentonite
11. Butyrospermum Parkii Butter
12. Camellia Oleifera Seed Oil
13. Tocopheryl Acetate
14. C30-45 Alkyl Dimethicone
15. Dimethicone/Vinyl Dimethicone Crosspolymer
16. Propylene Carbonate
17. Cetyl Dimethicone
18. Laureth-4
19. Tin Oxide
20. Fragrance
21. Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate
22. Mica
23. Titanium Dioxide
24. Yellow 5 Lake
25. Iron Oxides (Ci 77491
26. Ci 77492
27. Ci 77499)
28. Red 30 Lake
29. Red 28 Lake
30. Red 7
31. Red 6

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains siliconesContains essential oilsContains EU-26 allergensContains fragrance

Formulation view Oily primer base with isononyl isononate and dimethicone. Modified starch absorbs oil; PMMA and MMA copolymers form water-soluble films for longevity. Camellia oil and tocopheryl acetate provide antioxidants. Contains inorganic pigments. Suitable for combination to oily skin. Formulators must balance film-former dosage to avoid pore clogging and check regulatory compliance for plastic particles.

Key ingredients

ANTISTATIC

Isononyl Isononanoate

ABRASIVE

PolyethyleneSilica

FRAGRANCE

Caprylic/Capric Triglyceride

ANTIFOAMING

Dimethicone

FILM FORMING

Methyl Methacrylate CrosspolymerPolymethyl Methacrylate

ABSORBENT

Aluminum Starch Octenylsuccinate

Other ingredients

Microcrystalline Wax/Cire MicrocristallineStearalkonium BentoniteButyrospermum Parkii ButterCamellia Oleifera Seed OilTocopheryl AcetateC30-45 Alkyl DimethiconeDimethicone/Vinyl Dimethicone CrosspolymerPropylene CarbonateCetyl DimethiconeLaureth-4Tin OxideFragrancePentaerythrityl Tetra-Di-T-Butyl HydroxyhydrocinnamateMicaTitanium DioxideYellow 5 LakeIron Oxides (Ci 77491Ci 77492Ci 77499)Red 30 LakeRed 28 LakeRed 7Red 6

Skim through

Ingredients explained

Isononyl Isononanoate

Light, low-viscosity ester emollient; excellent spreadability, good for gels and light lotions

Polyethylene

Plastic polymer particles for abrasion or film; check EU ban on microplastics in rinse-off products, flush-off only

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Methyl Methacrylate Crosspolymer

MMA crosspolymer for durable water-soluble film; high doses may create occlusion

Polymethyl Methacrylate

PMMA for thickening, suspension, and film; micro-size powder carrier, very low irritation

Aluminum Starch Octenylsuccinate

Modified starch absorbent at 1–10%; for powder products, oil-absorbing without heavy feel

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Microcrystalline Wax/Cire Microcristalline

Not decoded yet

Stearalkonium Bentonite

Stearylkonium bentonite for gel formation and thickening; cationic, check compatibility

Butyrospermum Parkii Butter

Shea butter for occlusive moisturizing; high melt point, rich texture, caution for oily skin.

Camellia Oleifera Seed Oil

Camellia seed oil rich in oleic acid and antioxidants for moisturizing; low allergen risk

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

C30-45 Alkyl Dimethicone

High-volatility silicone for slip and gloss at 1–5%; non-comedogenic, good for oily skin, pair with volatile silicones

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Propylene Carbonate

Inert solvent and viscosity modifier; often used as penetration enhancer, mild at low levels

Cetyl Dimethicone

Silicone emulsifier/conditioner; excellent slip, hydrophobic, non-comedogenic.

Laureth-4

Not decoded yet

Tin Oxide

Inorganic mineral pigment providing opacity and suspension; requires skin safety assessment, typically used in sunscreens or powder colorants.

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate

High-efficiency lipid-soluble antioxidant preventing oil rancidity; very low usage, typically 0.05-0.1%, ensure even distribution, avoid metal-catalyzed oxidation.

Mica

Mineral colorant for pearlescence; heavy metal screening required

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Yellow 5 Lake

Yellow 5 lake for color; stability affected by pH and metal ions

Iron Oxides (Ci 77491

Not decoded yet

Ci 77492

Iron oxide red; stable inorganic pigment, non-toxic; ensure dispersion to prevent sedimentation.

Ci 77499)

Not decoded yet

Red 30 Lake

Red 30 lake for color; water-insoluble, requires stable dispersion

Red 28 Lake

Red lake pigment; for coloring and masking. More stable than dyes, monitor batch variability.

Red 7

Synthetic colorant for coloring; may cause pigmentation, use caution in sensitive skin

Red 6

Synthetic dye for coloration; restricted or banned in some markets, check local regulations

Related products in this category

• topface Topface Sensitive Mineral Primer Oil
• y-o-u Y.O.U. The Simplicity Perfect Matte Loose Powder
• catrice Catrice Clean ID High Cover Concealer
• catrice Catrice Cover + Care Sensitive Concealer
• hauslabs HausLabs Triclone Skin Tech Medium Coverage Lightweight Liquid Foundation
• rms-beauty RMS Beauty "re" Evolve Radiance Locking Hydrating Primer