sisley Phyto-Blush Twist
sisley Sisley Phyto-Blush Twist lists 31 ingredients on its label, 27 decoded. See what each one does, its irritancy and comedogenic tendency, and its status in national inventories.
Ingredients overview
Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.
Ingredients are listed in label order; the order reflects the label only, not exact concentrations.
- Isononyl Isononanoate
- Polyethylene
- Caprylic/Capric Triglyceride
- Dimethicone
- Methyl Methacrylate Crosspolymer
- Polymethyl Methacrylate
- Aluminum Starch Octenylsuccinate
- Silica
- Microcrystalline Wax/Cire Microcristalline
- Stearalkonium Bentonite
- Butyrospermum Parkii Butter
- Camellia Oleifera Seed Oil
- Tocopheryl Acetate
- C30-45 Alkyl Dimethicone
- Dimethicone/Vinyl Dimethicone Crosspolymer
- Propylene Carbonate
- Cetyl Dimethicone
- Laureth-4
- Tin Oxide
- Fragrance
- Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate
- Mica
- Titanium Dioxide
- Yellow 5 Lake
- Iron Oxides (Ci 77491
- Ci 77492
- Ci 77499)
- Red 30 Lake
- Red 28 Lake
- Red 7
- Red 6
Highlights
Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains siliconesContains essential oilsContains EU-26 allergensContains fragrance
Formulation view Oily primer base with isononyl isononate and dimethicone. Modified starch absorbs oil; PMMA and MMA copolymers form water-soluble films for longevity. Camellia oil and tocopheryl acetate provide antioxidants. Contains inorganic pigments. Suitable for combination to oily skin. Formulators must balance film-former dosage to avoid pore clogging and check regulatory compliance for plastic particles.
Key ingredients
- ANTISTATIC
- Isononyl Isononanoate
- ABRASIVE
- PolyethyleneSilica
- FRAGRANCE
- Caprylic/Capric Triglyceride
- ANTIFOAMING
- Dimethicone
- FILM FORMING
- Methyl Methacrylate CrosspolymerPolymethyl Methacrylate
- ABSORBENT
- Aluminum Starch Octenylsuccinate
Other ingredients
Microcrystalline Wax/Cire MicrocristallineStearalkonium BentoniteButyrospermum Parkii ButterCamellia Oleifera Seed OilTocopheryl AcetateC30-45 Alkyl DimethiconeDimethicone/Vinyl Dimethicone CrosspolymerPropylene CarbonateCetyl DimethiconeLaureth-4Tin OxideFragrancePentaerythrityl Tetra-Di-T-Butyl HydroxyhydrocinnamateMicaTitanium DioxideYellow 5 LakeIron Oxides (Ci 77491Ci 77492Ci 77499)Red 30 LakeRed 28 LakeRed 7Red 6
Skim through
| Ingredient | What it does | Irr. · Com. | Rating |
|---|---|---|---|
| Isononyl Isononanoate | ANTISTATIC, SKIN CONDITIONING - EMOLLIENT, SKIN CONDITIONING | 0 · 0 | Green |
| Polyethylene | ABRASIVE, FILM FORMING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Caprylic/Capric Triglyceride | FRAGRANCE, SOLVENT, PERFUMING, SKIN CONDITIONING - OCCLUSIVE | 0 · 0 | Green |
| Dimethicone | ANTIFOAMING, SKIN CONDITIONING - EMOLLIENT, SKIN CONDITIONING, SKIN PROTECTING | 0 · 0 | Green |
| Methyl Methacrylate Crosspolymer | FILM FORMING | 0 · – | Green |
| Polymethyl Methacrylate | FILM FORMING | 0 · 0 | Green |
| Aluminum Starch Octenylsuccinate | ABSORBENT, ANTICAKING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Silica | ABRASIVE, ABSORBENT, ANTICAKING, BULKING, OPACIFYING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Microcrystalline Wax/Cire Microcristalline | Not decoded yet | — | — |
| Stearalkonium Bentonite | GEL FORMING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Butyrospermum Parkii Butter | SKIN CONDITIONING, VISCOSITY CONTROLLING | 0 · 1 | Green |
| Camellia Oleifera Seed Oil | SKIN CONDITIONING | 0 · 0 | Green |
| Tocopheryl Acetate | ANTIOXIDANT, SKIN CONDITIONING | 0 · 0 | Green |
| C30-45 Alkyl Dimethicone | SKIN CONDITIONING | 0 · 0 | Green |
| Dimethicone/Vinyl Dimethicone Crosspolymer | SKIN CONDITIONING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Propylene Carbonate | SOLVENT, VISCOSITY CONTROLLING | 0 · – | Green |
| Cetyl Dimethicone | SKIN CONDITIONING - EMOLLIENT | 0 · 0 | Green |
| Laureth-4 | Not decoded yet | — | — |
| Tin Oxide | ABRASIVE, BULKING, OPACIFYING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Fragrance | 矫味剂,增香剂 | — | Yellow |
| Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate | ANTIOXIDANT | 0 · 0 | Green |
| Mica | ANTICAKING, BULKING, COLORANT, OPACIFYING | 0 · 0 | Green |
| Titanium Dioxide | UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano), the sum shall not exceed the limit given in column g (Maximum concentration in ready for use preparation) · 限制 <empty>; as a constituent of other substances, or in mixtures, in concentrations equal to, or greater than 0.1% by weight; Shall not be placed on the market, or used, as substance or in mixtures in concentrations equal to ot greater than 0.1% by weight; Shall not be used as propellant in aerosols for any use. Aerosols dispenser containing the substance as propellant shall not | 0 · 0 | Yellow |
| Yellow 5 Lake | 着色剂 | — | Green |
| Iron Oxides (Ci 77491 | Not decoded yet | — | — |
| Ci 77492 | COLORANT · 限制 IV/136 | 0 · 0 | Green |
| Ci 77499) | Not decoded yet | — | — |
| Red 30 Lake | 着色剂 | 0 · 0 | Green |
| Red 28 Lake | 着色剂 | 0 · 0 | Green |
| Red 7 | 着色剂 | 0 · – | Green |
| Red 6 | 着色剂 | — | Green |
Ingredients explained
- Isononyl Isononanoate
- Light, low-viscosity ester emollient; excellent spreadability, good for gels and light lotions
- Polyethylene
- Plastic polymer particles for abrasion or film; check EU ban on microplastics in rinse-off products, flush-off only
- Caprylic/Capric Triglyceride
- Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin
- Dimethicone
- Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin
- Methyl Methacrylate Crosspolymer
- MMA crosspolymer for durable water-soluble film; high doses may create occlusion
- Polymethyl Methacrylate
- PMMA for thickening, suspension, and film; micro-size powder carrier, very low irritation
- Aluminum Starch Octenylsuccinate
- Modified starch absorbent at 1–10%; for powder products, oil-absorbing without heavy feel
- Silica
- Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products
- Microcrystalline Wax/Cire Microcristalline
- Not decoded yet
- Stearalkonium Bentonite
- Stearylkonium bentonite for gel formation and thickening; cationic, check compatibility
- Butyrospermum Parkii Butter
- Shea butter for occlusive moisturizing; high melt point, rich texture, caution for oily skin.
- Camellia Oleifera Seed Oil
- Camellia seed oil rich in oleic acid and antioxidants for moisturizing; low allergen risk
- Tocopheryl Acetate
- Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light
- C30-45 Alkyl Dimethicone
- High-volatility silicone for slip and gloss at 1–5%; non-comedogenic, good for oily skin, pair with volatile silicones
- Dimethicone/Vinyl Dimethicone Crosspolymer
- Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.
- Propylene Carbonate
- Inert solvent and viscosity modifier; often used as penetration enhancer, mild at low levels
- Cetyl Dimethicone
- Silicone emulsifier/conditioner; excellent slip, hydrophobic, non-comedogenic.
- Laureth-4
- Not decoded yet
- Tin Oxide
- Inorganic mineral pigment providing opacity and suspension; requires skin safety assessment, typically used in sunscreens or powder colorants.
- Fragrance
- Fragrance; concentration must control allergen risk, label specific components
- Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnamate
- High-efficiency lipid-soluble antioxidant preventing oil rancidity; very low usage, typically 0.05-0.1%, ensure even distribution, avoid metal-catalyzed oxidation.
- Mica
- Mineral colorant for pearlescence; heavy metal screening required
- Titanium Dioxide
- Physical UV filter and colorant up to 25%; nano form requires attention
- Yellow 5 Lake
- Yellow 5 lake for color; stability affected by pH and metal ions
- Iron Oxides (Ci 77491
- Not decoded yet
- Ci 77492
- Iron oxide red; stable inorganic pigment, non-toxic; ensure dispersion to prevent sedimentation.
- Ci 77499)
- Not decoded yet
- Red 30 Lake
- Red 30 lake for color; water-insoluble, requires stable dispersion
- Red 28 Lake
- Red lake pigment; for coloring and masking. More stable than dyes, monitor batch variability.
- Red 7
- Synthetic colorant for coloring; may cause pigmentation, use caution in sensitive skin
- Red 6
- Synthetic dye for coloration; restricted or banned in some markets, check local regulations
Source: full ingredient list published on the product label, collected 2026-09-21. Ratings are our internal reading, not a regulatory conclusion. · Product page
Want to build one like this? Send an enquiry