atopalm Bb Cream

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Titanium Dioxide
2. Octinoxate
3. Water/Aqua
4. Propylene Glycol
5. Butylene Glycol Dicaprylate/Dicaprate
6. Cyclopentasiloxane
7. Cetyl PEG/PPG-10/1 Dimethicone
8. Caprylic/Capric Triglyceride
9. Talc
10. Cetyl Ethylhexanoate
11. Arbutin
12. Caprylyl Methicone
13. Hexyl Laurate
14. Disteardimonium Hectorite
15. Cyclohexasiloxane
16. Dimethicone
17. Dimethicone/Vinyl Dimethicone Crosspolymer
18. Magnesium Sulfate
19. Silica
20. Sorbitan Sesquioleate
21. Polyglyceryl-4 Isostearate
22. Glycyrrhiza Glabra Root Extract
23. Portulaca Oleracea Extract
24. Phellinus Linteus Extract
25. Glycerin
26. Myristoyl/Palmitoyl Oxostearamide/Arachamide Mea
27. Caprylyl Glycol
28. Panthenol
29. Silica Dimethyl Silylate
30. Aluminum Hydroxide
31. Stearic Acid
32. Phenoxyethanol
33. Mica
34. Allantoin
35. Tocopheryl Acetate
36. Triethyl Citrate
37. Triethoxycaprylylsilane
38. Fragrance
39. Caprylhydroxamic Acid
40. Adenosine
41. Hydroxyethyl Cellulose
42. Iron Oxides (Ci 77492
43. Ci77491
44. Ci 77499)

Highlights

Free of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains alcoholContains siliconesContains PEGContains essential oilsContains EU-26 allergensContains fragrance

Formulation view Titanium dioxide and octinoxate offer physical/chemical sun protection; silicone system improves spreadability, talc controls shine. Arbutin and licorice extracts lighten skin, panthenol repairs. Suitable for sensitive daily protection. Factory view focuses on surface modification of nano-TiO2 and photostability tests.

Key ingredients

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

防晒剂

Octinoxate

溶剂

Water/Aqua

HUMECTANT

Propylene Glycol

SKIN CONDITIONING - EMOLLIENT

Butylene Glycol Dicaprylate/DicaprateCyclopentasiloxane

SURFACTANT - EMULSIFYING

Cetyl PEG/PPG-10/1 Dimethicone

FRAGRANCE

Caprylic/Capric Triglyceride

Other ingredients

TalcCetyl EthylhexanoateArbutinCaprylyl MethiconeHexyl LaurateDisteardimonium HectoriteCyclohexasiloxaneDimethiconeDimethicone/Vinyl Dimethicone CrosspolymerMagnesium SulfateSilicaSorbitan SesquioleatePolyglyceryl-4 IsostearateGlycyrrhiza Glabra Root ExtractPortulaca Oleracea ExtractPhellinus Linteus ExtractGlycerinMyristoyl/Palmitoyl Oxostearamide/Arachamide MeaCaprylyl GlycolPanthenolSilica Dimethyl SilylateAluminum HydroxideStearic AcidPhenoxyethanolMicaAllantoinTocopheryl AcetateTriethyl CitrateTriethoxycaprylylsilaneFragranceCaprylhydroxamic AcidAdenosineHydroxyethyl CelluloseIron Oxides (Ci 77492Ci77491Ci 77499)

Skim through

Ingredients explained

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Octinoxate

Water-soluble UVB absorber for sunscreen; concentration limited by regulations, may irritate sensitive skin

Water/Aqua

Water as base solvent; no irritation, requires microbial control.

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Butylene Glycol Dicaprylate/Dicaprate

Light diester emollient, light and non-greasy; often used as solvent; oxidizes easily, needs antioxidants.

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Cetyl PEG/PPG-10/1 Dimethicone

Silicone surfactant, smooth and mild; regulates rheology and adds antistatic benefits

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Talc

Inorganic mineral powder for texture and oil absorption; must be asbestos-free; fineness affects skin feel and safety, avoid inhalation.

Cetyl Ethylhexanoate

Synthetic oil providing slip; large molecule, low penetration, non-comedogenic, suitable for dry or rough skin.

Arbutin

Tyrosinase inhibitor for whitening; typical use 1-2%, comply with EU restrictions on specific arbutins.

Caprylyl Methicone

Volatile silicone, fresh feel, does not absorb oil, used in foundations and cushions.

Hexyl Laurate

Light ester emollient for silky feel; 1-5%, monitor oxidative stability

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Magnesium Sulfate

Bulk agent at 0.1–1%; highly water-soluble, avoid high local concentration.

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Sorbitan Sesquioleate

Non-ionic emulsifier for O/W or W/O systems; moderate emulsification power, often used with co-emulsifiers

Polyglyceryl-4 Isostearate

Emulsifier at 1–5%; mild type, suitable for sensitive skin formulas

Glycyrrhiza Glabra Root Extract

Liquorice root extract for soothing and brightening; batch variability, watch polyphenol interactions

Portulaca Oleracea Extract

Achyronica extract with anti-inflammatory properties; monitor for heavy metals and pesticides, low-risk at typical doses

Phellinus Linteus Extract

Phellinus linteus polysaccharide at 0.1–0.5% in water phase; boosts hydration, low allergenicity

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Myristoyl/Palmitoyl Oxostearamide/Arachamide Mea

Emollient for hair and skin smoothing; high levels may be comedogenic

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Silica Dimethyl Silylate

Dimethicone modified silica for dry touch; anti-caking and oil absorption

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Mica

Mineral colorant for pearlescence; heavy metal screening required

Allantoin

Skin soother at 0.5-2%; promotes cell regeneration

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Triethyl Citrate

Solvent/plasticizer at 1–10%; provides fresh feel, slight citrus scent

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Caprylhydroxamic Acid

Chelating agent to stabilize metal ions; often paired with antioxidants for system stability, used at low levels

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Hydroxyethyl Cellulose

Water-soluble cellulose thickener; foaming risk, often paired with polyols.

Iron Oxides (Ci 77492

Not decoded yet

Ci77491

Not decoded yet

Ci 77499)

Not decoded yet

Related products in this category

• a-florence-skincare A.Florence Skincare Hydration Booster Mist
• a-florence-skincare A.Florence Skincare Skin Barrier Restoring Oil
• im-from I'm From Mugwort Spot Gel
• im-from I'm From Mugwort Sheet Mask
• im-from I'm From Ginseng Eye Cream (Discontinued)
• pixi Pixi Retinol Eye Cream