Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Glycerin
3. Caprylic/Capric Triglyceride
4. Polyglyceryl-3 Methylglucose Distearate
5. Niacinamide
6. 1,2-Hexanediol
7. Cetearyl Alcohol
8. Pentylene Glycol
9. Chlorella Vulgaris Extract
10. Hydrogenated Vegetable Oil
11. Carnauba Wax
12. Hydrolyzed Corn Starch
13. Lactobacillus Ferment
14. Bacillus Ferment
15. Xylose
16. Phaseolus Lunatus Seed Extract
17. Diisostearyl Malate
18. Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
19. Glucose
20. Silica
21. Butylene Glycol
22. Fructose
23. Ammonium Acryloyldimethyltaurate/VP Copolymer
24. Fructooligosaccharides
25. Panthenol
26. Stearyl Dimethicone
27. Sorbitan Isostearate
28. Ethylhexylglycerin
29. Adenosine
30. Trisodium Ethylenediamine Disuccinate
31. Glyceryl Acrylate/Acrylic Acid Copolymer
32. Sucrose
33. Ceramide NP
34. Hydrogenated Lecithin
35. Lactobionic Acid
36. Micrococcus Lysate
37. Tocopherol
38. Dipeptide Diaminobutyroyl Benzylamide Diacetate
39. Palmitoyl Tripeptide-5
40. Cetyl Hydroxyethylcellulose
41. Rutin
42. Hexapeptide-2
43. Acetyl Tetrapeptide-5
44. Dextran
45. Tripeptide-1
46. Palmitoyl Hexapeptide-12
47. Biotin
48. Acetyl Hexapeptide-8
49. Palmitoyl Tetrapeptide-7
50. Palmitoyl Tripeptide-1
51. Hexapeptide-9
52. Palmitoyl Pentapeptide-4
53. Copper Tripeptide-1
54. Xanthan Gum
55. Disodium EDTA
56. Fragrance

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains siliconesContains animal-derivedContains EU-26 allergensContains fragrance

Formulation view O/W emulsion containing niacinamide, algae extract, and diverse ferment filtrates. Formulated with ceramides and barrier-supporting agents, plus oil-absorbing powders for a matte finish. Ideal for oily and combination skin. Factory note: Complex ferment ingredients require balancing preservation systems with active stability.

Key ingredients

ANTIPLAQUE

Water

DENATURANT

Glycerin

FRAGRANCE

Caprylic/Capric Triglyceride

SURFACTANT - EMULSIFYING

Polyglyceryl-3 Methylglucose Distearate

SMOOTHING

Niacinamide

SKIN CONDITIONING

1,2-HexanediolPentylene Glycol

SKIN CONDITIONING - EMOLLIENT

Cetearyl Alcohol

Other ingredients

Chlorella Vulgaris ExtractHydrogenated Vegetable OilCarnauba WaxHydrolyzed Corn StarchLactobacillus FermentBacillus FermentXylosePhaseolus Lunatus Seed ExtractDiisostearyl MalateHydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate CopolymerGlucoseSilicaButylene GlycolFructoseAmmonium Acryloyldimethyltaurate/VP CopolymerFructooligosaccharidesPanthenolStearyl DimethiconeSorbitan IsostearateEthylhexylglycerinAdenosineTrisodium Ethylenediamine DisuccinateGlyceryl Acrylate/Acrylic Acid CopolymerSucroseCeramide NPHydrogenated LecithinLactobionic AcidMicrococcus LysateTocopherolDipeptide Diaminobutyroyl Benzylamide DiacetatePalmitoyl Tripeptide-5Cetyl HydroxyethylcelluloseRutinHexapeptide-2Acetyl Tetrapeptide-5DextranTripeptide-1Palmitoyl Hexapeptide-12BiotinAcetyl Hexapeptide-8Palmitoyl Tetrapeptide-7Palmitoyl Tripeptide-1Hexapeptide-9Palmitoyl Pentapeptide-4Copper Tripeptide-1Xanthan GumDisodium EDTAFragrance

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Polyglyceryl-3 Methylglucose Distearate

Non-ionic emulsifier at 1–3%; mild, easily combined with other surfactants.

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Chlorella Vulgaris Extract

Algae extract for skin conditioning and antioxidant; typically 1-5%, monitor stability

Hydrogenated Vegetable Oil

Occlusive emollient for smooth feel; high levels may be comedogenic, use caution for acne-prone skin

Carnauba Wax

High-melting wax for hardness and gloss; high dosages lead to stiff bar texture.

Hydrolyzed Corn Starch

Hygroscopic starch for humidity control/filming; needs preservative, low comedogenicity.

Lactobacillus Ferment

Probiotic ferment filtrate for conditioning; complex mix, check allergens and preservative residues

Bacillus Ferment

Bacillus ferment extract; skin conditioner with peptides; verify sterile specs and endotoxin levels

Xylose

Low-MW humectant and fragrance carrier; <5% typical, blends with polyols for texture.

Phaseolus Lunatus Seed Extract

White kidney bean extract, often for alpha-amylase inhibition. In skincare: skin conditioner/emollient.

Diisostearyl Malate

Diisostearyl malate; lightweight emollient and emulsifier; non-greasy feel, biodegradable, used in premium systems.

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

High-molecular-weight thickener and emulsion stabilizer; requires electrolytes or acid adjustment near isoelectric point for optimal performance.

Glucose

Low-MW humectant and buffer; high hygroscopicity requires careful preservation and humidity control.

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Fructose

Strong humectant; high levels can increase viscosity and hygroscopicity.

Ammonium Acryloyldimethyltaurate/VP Copolymer

Cationic polymer providing suspension, thickening, and conditioning; often paired with anionic thickening systems, low usage, imparts slip.

Fructooligosaccharides

Prebiotic polysaccharide for hydration/skin conditioning; high levels may feel sticky

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Stearyl Dimethicone

Silicone emulsifier/modifier for texture. Highly occlusive; use caution in acne-prone skin or if silicone sensitivity is a concern.

Sorbitan Isostearate

Non-ionic emulsifier (low HLB); typically used in blends, low comedogenicity, soft skin feel.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Trisodium Ethylenediamine Disuccinate

Mild chelator replacing EDTA; water-soluble, very low irritation, stabilizes metal ions

Glyceryl Acrylate/Acrylic Acid Copolymer

Acrylate copolymer for thickening and moisturizing; synthetic polymer with low sensitization risk.

Sucrose

Sucrose, water-soluble thickener and humectant; high levels prone to hygroscopy.

Ceramide NP

Ceramide N3 for barrier repair; lipophilic, needs oil phase or emulsion, avoid high standalone use.

Hydrogenated Lecithin

Emulsifier from lecithin; stable, used in powder emulsions

Lactobionic Acid

Polyhydroxy acid for pH buffering; gentle, check stability at high levels

Micrococcus Lysate

Micrococcus ferment lysate with peptides/metabolites; low concentration skin conditioner, ensure sterile process.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Dipeptide Diaminobutyroyl Benzylamide Diacetate

Dipeptide skin conditioner for moisturizing and repair; low concentration, minimal irritation or comedogenic risk.

Palmitoyl Tripeptide-5

Peptide actives for skin conditioning; typically used at low levels.

Cetyl Hydroxyethylcellulose

Water-soluble cellulose derivative; viscosity booster and emulsion stabilizer; pH sensitive.

Rutin

Flavonoid antioxidant; also conditions skin, note stability in aqueous solutions.

Hexapeptide-2

Not decoded yet

Acetyl Tetrapeptide-5

Acetyl tetrapeptide-5, a moisturizing peptide that enhances skin hydration via hydrolysis, typically mild, used to improve dryness

Dextran

Polysaccharide for binding; water-soluble requires preservation.

Tripeptide-1

Not decoded yet

Palmitoyl Hexapeptide-12

Peptide for elasticity; use per vendor specs. No public irritancy or comedogenic data.

Biotin

Vitamin B7 nutrient claimant; topical effect limited, use at 1-20 ppm.

Acetyl Hexapeptide-8

Acetyl hexapeptide-8; signal peptide, low concentration, used for firming and hydration, low irritancy.

Palmitoyl Tetrapeptide-7

Palmitoyl Tetrapeptide-7 boosts collagen; use 0.1–1%, formulate with lipid carriers

Palmitoyl Tripeptide-1

Palmitoyl Tripeptide-1 for repair; requires lipid carrier, unstable in aqueous phase

Hexapeptide-9

Hexapeptide-9 (Acetyl Hexapeptide); signal peptide for fibroblast stimulation, typically used at 0.5-1%.

Palmitoyl Pentapeptide-4

Signal peptide promoting collagen synthesis; effective at low concentration, needs penetration enhancers or encapsulation

Copper Tripeptide-1

Copper Tripeptide-1 (GHK-Cu) for repair/anti-aging at 0.01–0.1%; water-soluble, avoid chelators.

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Related products in this category

• natura-estonica Natura Estonica Purifying Face Scrub
• tesco Tesco Fred & Flo Wipes
• nip-fab Nip+Fab Salicylic Fix Facial Scrub
• nip-fab Nip+Fab Salicylic Fix Concentrate Extreme 2%
• nip-fab Nip+Fab Teen Skin Fix Salicylic Acid Tonic
• nip-fab Nip+Fab Glycolic Fix Extreme Scrub 6%