Biore (蜜妮) 含水防晒清透水凝露 成份

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Ethylhexyl methoxycinnamate
2. Bis-ethylhexyloxyphenol methoxyphenyl triazine
3. Diethylamino Hydroxybenzoyl Hexyl Benzoate
4. Ethylhexyl Triazone
5. Water
6. Alcohol
7. Lauryl Methacrylate/Sodium Methacrylate Crosspolymer
8. Titanium Dioxide
9. C12-15 alkyl benzoate
10. Dimethicone
11. Xylitol
12. Dextrin palmitate
13. Hydrated silica
14. Hydroxyethylcellulose
15. Glyceryl Stearate
16. VINYL DIMETHICONE/METHICONE SILSESQUIOXANE CROSSPOLYMER
17. Triethoxycaprylylsilane
18. Acrylates/C10-30 alkyl acrylate crosspolymer
19. Cetyl Alcohol
20. C4-14 perfluoroalkylethoxy dimethicone
21. Aluminum hydroxide
22. Potassium Hydroxide
23. Stearic Acid
24. Stearyl Alcohol
25. Agar
26. Fragrance
27. Polyvinyl Alcohol
28. Isoceteth-20
29. Sodium methyl stearoyl taurate
30. Aminomethyl propanol
31. BHT
32. Sodium stearoxy PG-hydroxyethylcellulose sulfonate
33. Glutamic Acid
34. Ceratonia Siliqua Gum
35. Disodium EDTA
36. Maltose
37. Butylene Glycol
38. Propylene Glycol
39. Citrus Grandis Fruit Extract
40. Royal Jelly Extract
41. Sodium Hyaluronate
42. Citrus Aurantium Dulcis Fruit Extract
43. Citrus Medica Limonum Fruit Extract
44. Phenoxyethanol
45. Methylparaben
46. Butylparaben
47. Ethylparaben
48. Propylparaben

Highlights

Free of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains alcoholContains siliconesContains EU-26 allergensContains fragranceContains animal-derivedContains parabens

Key ingredients

LIGHT STABILIZER

Ethylhexyl methoxycinnamateDiethylamino Hydroxybenzoyl Hexyl BenzoateEthylhexyl Triazone

HAIR CONDITIONING

Bis-ethylhexyloxyphenol methoxyphenyl triazine

ANTIPLAQUE

Water

ANTIFOAMING

Alcohol

FILM FORMING

Lauryl Methacrylate/Sodium Methacrylate Crosspolymer

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

Other ingredients

C12-15 alkyl benzoateDimethiconeXylitolDextrin palmitateHydrated silicaHydroxyethylcelluloseGlyceryl StearateVINYL DIMETHICONE/METHICONE SILSESQUIOXANE CROSSPOLYMERTriethoxycaprylylsilaneAcrylates/C10-30 alkyl acrylate crosspolymerCetyl AlcoholC4-14 perfluoroalkylethoxy dimethiconeAluminum hydroxidePotassium HydroxideStearic AcidStearyl AlcoholAgarFragrancePolyvinyl AlcoholIsoceteth-20Sodium methyl stearoyl taurateAminomethyl propanolBHTSodium stearoxy PG-hydroxyethylcellulose sulfonateGlutamic AcidCeratonia Siliqua GumDisodium EDTAMaltoseButylene GlycolPropylene GlycolCitrus Grandis Fruit ExtractRoyal Jelly ExtractSodium HyaluronateCitrus Aurantium Dulcis Fruit ExtractCitrus Medica Limonum Fruit ExtractPhenoxyethanolMethylparabenButylparabenEthylparabenPropylparaben

Skim through

Ingredients explained

Ethylhexyl methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Bis-ethylhexyloxyphenol methoxyphenyl triazine

UV-B absorber, photostable; high purity and low bioaccumulation, check for impurities.

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Alcohol

Ethanol for solubility/drying at 5-15%; high conc. is drying/irritating, avoid lip/eye, low residue, balance with humectants.

Lauryl Methacrylate/Sodium Methacrylate Crosspolymer

Crosslinked acrylate resin for film formation; tacky at high levels, dissolve in polar solvents

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

C12-15 alkyl benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Xylitol

Polyol humectant, sweet taste; water-soluble, high hygroscopy, excess draws moisture.

Dextrin palmitate

Modified polysaccharide ester for emulsifying and anticaking; mild cleanser; used in solid soaps or powders.

Hydrated silica

Inorganic abrasive and oil absorbent; prone to settling, needs dispersant, high levels increase exfoliation

Hydroxyethylcellulose

Water-soluble cellulose ether for thickening and suspension stabilization; sensitive to ions, electrolytes reduce viscosity, use at pH 7-8.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

VINYL DIMETHICONE/METHICONE SILSESQUIOXANE CROSSPOLYMER

Rheology-modifying silicone polymer for suspension and feel; requires silicone-compatible system

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Acrylates/C10-30 alkyl acrylate crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Cetyl Alcohol

Cetyl alcohol for emulsification/thickening; high concentration >10% may irritate.

C4-14 perfluoroalkylethoxy dimethicone

Perfluorinated dimethicone for smooth, lubricious feel; fluorinated silicone, environmental concerns in some markets

Aluminum hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Potassium Hydroxide

Strong alkali pH adjuster, trace usage (<0.1%); corrosive, must be neutralized.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Stearyl Alcohol

Stearic alcohol; fatty alcohol for emulsion thickening/structure, often blended with soaps, moderate comedogenicity.

Agar

Natural polysaccharide gelling agent for thickening and suspension; may gel at high levels, avoid cationic systems

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Polyvinyl Alcohol

Film/viscosity agent for masks/cleansers; water-soluble, forms flexible film

Isoceteth-20

Not decoded yet

Sodium methyl stearoyl taurate

Mild anionic surfactant, easy to rinse, low irritation; often blended for foam stability in gentle cleansers

Aminomethyl propanol

pH buffer at 0.1–1%; irritating at high levels, avoid direct mixing with strong acids/bases

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Sodium stearoxy PG-hydroxyethylcellulose sulfonate

Modified cellulose salt for emulsification and viscosity; mild and compatible.

Glutamic Acid

Glutamic acid, non-essential amino acid humectant; high levels can be astringent, buffer needed.

Ceratonia Siliqua Gum

Locust bean gum thickener/emulsifier; viscous at high levels, check batch consistency.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Maltose

Maltose humectant/skin conditioner; low sweetness, masking; monitor microbial growth.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Citrus Grandis Fruit Extract

Pomelo extract with astringent and skin-conditioning properties; contains phototoxic citrus components, assess risk for daytime use.

Royal Jelly Extract

Royal jelly extract for skin conditioning; contains animal proteins, contraindicated for bee allergies

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Citrus Aurantium Dulcis Fruit Extract

Citrus peel extract, provides fragrance and astringency; photosensitive due to furanocoumarins; caution in daytime or remove photoactives.

Citrus Medica Limonum Fruit Extract

Citrus Medica Limonum fruit extract for scent and phenolics; contains photosensitizing furanocoumarins, use cautiously in daytime products.

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Methylparaben

Preservative, narrow spectrum; often combined, check allergen risk and regulatory limits.

Butylparaben

Butylparaben preservative; low concentrations; potential endocrine concerns, regulatory limits apply.

Ethylparaben

Paraben preservative; EU restricted, watch total load and sensitive skin reactions

Propylparaben

Medium-chain preservative; restricted use, pH-sensitive efficacy.