Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Betula Platyphylla Japonica Juice
3. Glycerin
4. Dibutyl Adipate
5. Butylene Glycol
6. Ethylhexyl Triazone
7. Terephthalylidene Dicamphor Sulfonic Acid
8. Niacinamide
9. Silica
10. Dimethicone
11. Tromethamine
12. Polyglyceryl-6 Stearate
13. Sodium Hyaluronate
14. Artemisia Annua Extract
15. Anthemis Nobilis Flower Oil
16. Pinus Sylvestris Leaf Oil
17. Aloe Barbadensis Leaf Extract
18. Dioscorea Japonica Root Extract
19. Laminaria Japonica Extract
20. Ulmus Davidiana Root Extract
21. Viola Mandshurica Flower Extract
22. Mineral Water
23. Hydrolyzed Hyaluronic Acid
24. Hyaluronic Acid
25. Diethylamino Hydroxybenzoyl Hexyl Benzoate
26. Methyl Trimethicone
27. Polysilicone-15
28. Pentylene Glycol
29. Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
30. Hydroxyethyl Urea
31. 1,2-Hexanediol
32. Poly C10-30 Alkyl Acrylate
33. Dimethicone/Vinyl Dimethicone Crosspolymer
34. Hydroxyacetophenone
35. Sodium Polyacryloyldimethyl Taurate
36. Polyglyceryl-6 Behenate
37. Glyceryl Stearate
38. Hydroxypropyl Methylcellulose Stearoxy Ether
39. Sodium Stearoyl Glutamate
40. Methylpropanediol
41. Polyether-1
42. Glyceryl Glucoside
43. Dehydroxanthan Gum
44. Polyacrylate Crosspolymer-6
45. Adenosine
46. Arginine
47. Caprylic Acid
48. Dipropylene Glycol
49. Cetearyl Olivate
50. Sorbitan Olivate
51. Hydrogenated Lecithin
52. Betulin
53. Hydroxypropyltrimonium Hyaluronate
54. Sodium Acetylated Hyaluronate
55. Sodium Dna
56. Glycine
57. Glutamic Acid
58. Hydrolyzed Sodium Hyaluronate
59. Sodium Hyaluronate Crosspolymer
60. Potassium Hyaluronate
61. Behenyl Alcohol
62. Carbomer
63. Cetearyl Alcohol

Highlights

Free of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains siliconesContains fragranceContains EU-26 allergensContains essential oilsContains alcoholContains animal-derived

Formulation view Water-based formula using glycerin and polyols for hydration, combined with niacinamide and hyaluronic acid. Plant extracts soothe, while silica and volatile silicones create matte control. Broad-spectrum UV filters included. Suitable for oily to combination skin seeking freshness. Factory note: Artemisia extract is potentially sensitizing; caution for sensitive skin.

Key ingredients

ANTIPLAQUE

Water

SKIN CONDITIONING

Betula Platyphylla Japonica Juice

DENATURANT

Glycerin

SKIN CONDITIONING - EMOLLIENT

Dibutyl Adipate

HUMECTANT

Butylene Glycol

LIGHT STABILIZER

Ethylhexyl TriazoneTerephthalylidene Dicamphor Sulfonic Acid

SMOOTHING

Niacinamide

Other ingredients

SilicaDimethiconeTromethaminePolyglyceryl-6 StearateSodium HyaluronateArtemisia Annua ExtractAnthemis Nobilis Flower OilPinus Sylvestris Leaf OilAloe Barbadensis Leaf ExtractDioscorea Japonica Root ExtractLaminaria Japonica ExtractUlmus Davidiana Root ExtractViola Mandshurica Flower ExtractMineral WaterHydrolyzed Hyaluronic AcidHyaluronic AcidDiethylamino Hydroxybenzoyl Hexyl BenzoateMethyl TrimethiconePolysilicone-15Pentylene GlycolBis-Ethylhexyloxyphenol Methoxyphenyl TriazineHydroxyethyl Urea1,2-HexanediolPoly C10-30 Alkyl AcrylateDimethicone/Vinyl Dimethicone CrosspolymerHydroxyacetophenoneSodium Polyacryloyldimethyl TauratePolyglyceryl-6 BehenateGlyceryl StearateHydroxypropyl Methylcellulose Stearoxy EtherSodium Stearoyl GlutamateMethylpropanediolPolyether-1Glyceryl GlucosideDehydroxanthan GumPolyacrylate Crosspolymer-6AdenosineArginineCaprylic AcidDipropylene GlycolCetearyl OlivateSorbitan OlivateHydrogenated LecithinBetulinHydroxypropyltrimonium HyaluronateSodium Acetylated HyaluronateSodium DnaGlycineGlutamic AcidHydrolyzed Sodium HyaluronateSodium Hyaluronate CrosspolymerPotassium HyaluronateBehenyl AlcoholCarbomerCetearyl Alcohol

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Betula Platyphylla Japonica Juice

Birch juice NMF 0.5-5%; aqueous, check preservatives & sugars

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Dibutyl Adipate

Light ester, solvent and emollient, fresh feel and volatility, non-comedogenic.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Terephthalylidene Dicamphor Sulfonic Acid

UV absorber and light stabilizer; EU regulated, check max levels and formulation stability

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Tromethamine

pH adjuster, alkaline; precise dosing required

Polyglyceryl-6 Stearate

Gentle emulsifier suitable for sensitive skin; oil-soluble, often paired with others; non-comedogenic

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Artemisia Annua Extract

Artemisia annua extract used as a natural fragrance ingredient; may cause sensitivity.

Anthemis Nobilis Flower Oil

Botanical oil as fragrance and conditioner; contains allergens, dilute and test for sensitization

Pinus Sylvestris Leaf Oil

Pine leaf oil, woody scent; contains peroxides and monoterpenes, may irritate sensitive skin, add at low temps and control total load.

Aloe Barbadensis Leaf Extract

Aloe vera leaf extract for soothing and humectant; monitor polysaccharide level and endotoxins

Dioscorea Japonica Root Extract

Dioscorea root extract used for moisturizing and repairing, boosts hydration.

Laminaria Japonica Extract

Kelp extract providing hydration and antioxidant protection; water-soluble.

Ulmus Davidiana Root Extract

Plant extract for basic skin conditioning; low usage, ensure raw material consistency

Viola Mandshurica Flower Extract

Viola mandshurica flower extract providing antioxidant and astringent properties

Mineral Water

Mineral water as formulation solvent, containing natural minerals; water hardness may impact system stability

Hydrolyzed Hyaluronic Acid

Low-MW humectant with superior penetration vs high-MW; 0.1-0.5% typical, hygroscopic, store dry to prevent clumping.

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Methyl Trimethicone

Methyl trimethicone, light volatile silicone; non-comedogenic, good powder compatibility.

Polysilicone-15

Not decoded yet

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

UV-B absorber, photostable; high purity and low bioaccumulation, check for impurities.

Hydroxyethyl Urea

Potent humectant and conditioner; high penetration, used for skin hydration and hair care

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Poly C10-30 Alkyl Acrylate

Synthetic thickener and emulsion stabilizer for gels or emulsions; generally inert to skin; watch residual monomers.

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Hydroxyacetophenone

Hydroxyacetophenone as antioxidant; often boosts Vitamin C, works in acidic pH.

Sodium Polyacryloyldimethyl Taurate

Sodium polyacryloyldimethyl taurate for emulsion stabilization and thickening; ionic polymer, check ion compatibility.

Polyglyceryl-6 Behenate

Non-ionic emulsifier for stabilizing O/W systems; gentle.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Hydroxypropyl Methylcellulose Stearoxy Ether

Cellulose derivative for thickening and emulsion stabilization; cold or hot solubility depends on process, confirm dissolution method.

Sodium Stearoyl Glutamate

Mild amino-acid surfactant, poor solubility, pairs with fatty alcohols, fine foam.

Methylpropanediol

Diol solvent and extraction carrier; enhances solubility of actives, low irritation profile.

Polyether-1

Not decoded yet

Glyceryl Glucoside

Polyol humectant with light, non-sticky feel; less tacky than glycerin

Dehydroxanthan Gum

Modified polymer for emulsion stability and film forming; high viscosity impact.

Polyacrylate Crosspolymer-6

Water-soluble thickener; requires neutralizer, performs best at pH 5–7

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Arginine

Arginine for moisturizing/conditioning; amino acid, high biocompatibility, often used in blends.

Caprylic Acid

Medium-chain fatty acid with preservative boost and emulsification; distinct odor, irritant at high levels.

Dipropylene Glycol

Solvent for essential oils; better humectancy than PEG

Cetearyl Olivate

Natural emulsifier pairing with glucosides; skin-like feel, biodegradable, prone to oxidation requiring light protection

Sorbitan Olivate

O/W emulsifier, HLB ~15, requires ionic co-surfactant, potential sensitizer.

Hydrogenated Lecithin

Emulsifier from lecithin; stable, used in powder emulsions

Betulin

Betulin, a natural triterpene for skin conditioning, with antioxidant and soothing properties, typically added at low concentrations

Hydroxypropyltrimonium Hyaluronate

Cationic hyaluronic acid, 0.1–1%; water-soluble thickener and conditioning agent.

Sodium Acetylated Hyaluronate

Acetylated HA; modified for hydrophobicity, improved penetration and non-tacky feel compared to standard HA.

Sodium Dna

Water-soluble polymer for hydration and film feel; often claimed for repair support

Glycine

Humectant amino acid, 1–3%; small molecule, low irritation.

Glutamic Acid

Glutamic acid, non-essential amino acid humectant; high levels can be astringent, buffer needed.

Hydrolyzed Sodium Hyaluronate

Low-molecular-weight hyaluronic acid derivative with better penetration and strong hydration; different molecular weights provide hydration at various depths, typical concentration 0.1-1%.

Sodium Hyaluronate Crosspolymer

Crosslinked high-MW HA; forms surface hydrogel for long-lasting hydration, minimal penetration, physical film-forming.

Potassium Hyaluronate

Hyaluronic salt, excellent humectant; efficacy varies with MW, best with occlusive base

Behenyl Alcohol

Fat alcohol emulsifier/thickener at 1-3%; low comedogenic risk, check solubility in strong acid/base systems, add antioxidants.

Carbomer

Gelling thickener requiring neutralization; watch out for ion compatibility

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

Related products in this category

• biafine Biafine Total Emulsion
• boiron-laboratories Boiron Laboratories HOMEOPLASMINE
• lucas-papaw-remedies Lucas’ Papaw Remedies Lucas’ Papaw Ointment
• mother-dirt Mother Dirt AO+ Mist Live Probiotic Spray
• abdiibrahim Abdiibrahim Acnelyse
• necessaire Nécessaire The Sex Gel (Fragrance-Free)