Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Glycerin
3. Dipropylene Glycol
4. Cetyl Ethylhexanoate
5. Niacinamide
6. 1,2-Hexanediol
7. Ceratonia Siliqua Gum
8. Chondrus Crispus Powder
9. Chondrus Crispus Extract
10. Collagen
11. Butyrospermum Parkii Butter
12. Crataegus Cuneata Fruit Extract
13. Mentha Piperita Leaf Extract
14. Mentha Suaveolens Leaf Extract
15. Mentha Viridis Leaf Extract
16. Ribes Nigrum Bud Extract
17. Vanilla Planifolia Fruit Extract
18. Xylitylglucoside
19. Xylitol
20. Musa Sapientum Fruit Extract
21. Rose Extract
22. Rubus Suavissimus Leaf Extract
23. Sodium Hyaluronate
24. Hydrolyzed Hyaluronic Acid
25. Hyaluronic Acid
26. Caprylic/Capric Triglyceride
27. Betaine
28. Hydroxyacetophenone
29. Panthenol
30. Polysorbate 80
31. Potassium Chloride
32. Sodium Polyacrylate
33. Cellulose Gum
34. Sucrose
35. Hydrogenated Polydecene
36. Hydrogenated Lecithin
37. Glyceryl Stearate
38. Adenosine
39. Ethylhexylglycerin
40. Trideceth-6
41. C11-13 Isoalkane
42. Dipotassium Glycyrrhizate
43. Ceramide NP
44. Stearic Acid
45. Ceramide AP
46. Ceramide NS
47. Cholesterol
48. Phytosphingosine
49. Butylene Glycol
50. Caprylyl Glycol
51. Glyceryl Glucoside
52. Propanediol
53. Polyglyceryl-10 Laurate
54. Anhydroxylitol
55. Acetyl Tetrapeptide-2
56. Hexapeptide-11
57. Palmitoyl Tripeptide-1
58. Tripeptide-1
59. Glucose
60. Pantolactone
61. Benzyl Glycol
62. Hydrolyzed Glycosaminoglycans
63. Palmitoyl Tripeptide-5
64. Ceramide EOP
65. Acetyl Tetrapeptide-5
66. Sodium Hyaluronate Crosspolymer
67. Hydroxypropyltrimonium Hyaluronate
68. Copper Tripeptide-1
69. Hexapeptide-9
70. Palmitoyl Pentapeptide-4
71. Sodium Acetylated Hyaluronate
72. Cetearyl Alcohol
73. Disodium EDTA

Highlights

Free of alcoholFree of siliconesFree of sulfatesFree of formaldehyde releasersContains animal-derivedContains essential oilsContains EU-26 allergensContains parabensContains PEGContains fragranceContains mineral oil

Formulation view Water-based gel using glycerin and dipropylene glycol for moisture, with seaweed gums for structure. Includes niacinamide and HA for skin conditioning. Suitable for daily light hydration. Factory note: natural gums are pH-sensitive; temperature control is critical for stability.

Key ingredients

ANTIPLAQUE

Water

DENATURANT

Glycerin

FRAGRANCE

Dipropylene Glycol

SKIN CONDITIONING - EMOLLIENT

Cetyl Ethylhexanoate

SMOOTHING

Niacinamide

SKIN CONDITIONING

1,2-Hexanediol

BINDING

Ceratonia Siliqua Gum

ABRASIVE

Chondrus Crispus Powder

Other ingredients

Chondrus Crispus ExtractCollagenButyrospermum Parkii ButterCrataegus Cuneata Fruit ExtractMentha Piperita Leaf ExtractMentha Suaveolens Leaf ExtractMentha Viridis Leaf ExtractRibes Nigrum Bud ExtractVanilla Planifolia Fruit ExtractXylitylglucosideXylitolMusa Sapientum Fruit ExtractRose ExtractRubus Suavissimus Leaf ExtractSodium HyaluronateHydrolyzed Hyaluronic AcidHyaluronic AcidCaprylic/Capric TriglycerideBetaineHydroxyacetophenonePanthenolPolysorbate 80Potassium ChlorideSodium PolyacrylateCellulose GumSucroseHydrogenated PolydeceneHydrogenated LecithinGlyceryl StearateAdenosineEthylhexylglycerinTrideceth-6C11-13 IsoalkaneDipotassium GlycyrrhizateCeramide NPStearic AcidCeramide APCeramide NSCholesterolPhytosphingosineButylene GlycolCaprylyl GlycolGlyceryl GlucosidePropanediolPolyglyceryl-10 LaurateAnhydroxylitolAcetyl Tetrapeptide-2Hexapeptide-11Palmitoyl Tripeptide-1Tripeptide-1GlucosePantolactoneBenzyl GlycolHydrolyzed GlycosaminoglycansPalmitoyl Tripeptide-5Ceramide EOPAcetyl Tetrapeptide-5Sodium Hyaluronate CrosspolymerHydroxypropyltrimonium HyaluronateCopper Tripeptide-1Hexapeptide-9Palmitoyl Pentapeptide-4Sodium Acetylated HyaluronateCetearyl AlcoholDisodium EDTA

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Dipropylene Glycol

Solvent for essential oils; better humectancy than PEG

Cetyl Ethylhexanoate

Synthetic oil providing slip; large molecule, low penetration, non-comedogenic, suitable for dry or rough skin.

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Ceratonia Siliqua Gum

Locust bean gum thickener/emulsifier; viscous at high levels, check batch consistency.

Chondrus Crispus Powder

Seaweed powder for gentle physical exfoliation; absorbs water; for scrubs and care, no chemical irritation.

Chondrus Crispus Extract

Carrageenan for thickening and moisturizing; seaweed-based, pH-sensitive

Collagen

Hydrating conditioning agent; soluble protein used in hair care and toners; forms occlusive layer.

Butyrospermum Parkii Butter

Shea butter for occlusive moisturizing; high melt point, rich texture, caution for oily skin.

Crataegus Cuneata Fruit Extract

Crataegus fruit extract for antioxidant conditioning; preserve aqueous/oil phases, low allergy risk.

Mentha Piperita Leaf Extract

Mint extract for cooling sensation; contains menthol, mild irritation potential.

Mentha Suaveolens Leaf Extract

Spearmint leaf extract, astringent and soothing; 1–3% typical, menthol may irritate

Mentha Viridis Leaf Extract

Spearmint leaf extract for cooling and fragrance; menthol may irritate broken skin, avoid in infants.

Ribes Nigrum Bud Extract

Blackcurrant bud extract for conditioning and scent; preserve well, use minimally to limit allergy risk.

Vanilla Planifolia Fruit Extract

Vanilla extract adds scent and soothing; acts as natural fragrance, dose carefully.

Xylitylglucoside

Polyol humectant with high water absorption and fresh feel; often co-used with propylene glycol for enhanced hydration.

Xylitol

Polyol humectant, sweet taste; water-soluble, high hygroscopy, excess draws moisture.

Musa Sapientum Fruit Extract

Fruit extract for skin conditioning; check formulation stability.

Rose Extract

Plant extract for aromatherapy and skin conditioning; verify allergen labeling.

Rubus Suavissimus Leaf Extract

Polyphenol-rich extract for antioxidant and soothing; used as natural skin care additive.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Hydrolyzed Hyaluronic Acid

Low-MW humectant with superior penetration vs high-MW; 0.1-0.5% typical, hygroscopic, store dry to prevent clumping.

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Betaine

Betaine for mild moisturizing/surfactant; low concentration 1-2% common, high may irritate.

Hydroxyacetophenone

Hydroxyacetophenone as antioxidant; often boosts Vitamin C, works in acidic pH.

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Polysorbate 80

Non-ionic emulsifier and solubilizer; watch for interaction with parabens

Potassium Chloride

Viscosity modifier for gels and shampoos; high concentrations may cause local stinging.

Sodium Polyacrylate

Superabsorbent resin, <1%; gels with electrolytes, ionic strength control required.

Cellulose Gum

Cellulose gum, water-soluble thickener/stabilizer; may destabilize with cationics, hydrate first.

Sucrose

Sucrose, water-soluble thickener and humectant; high levels prone to hygroscopy.

Hydrogenated Polydecene

Hydrogenated polydecene, light mineral oil alternative, low comedogenic; silky, non-greasy.

Hydrogenated Lecithin

Emulsifier from lecithin; stable, used in powder emulsions

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Trideceth-6

Not decoded yet

C11-13 Isoalkane

C11-13 Isoalkane, lightweight solvent and emollient; fast-drying, non-greasy; 5-30%, petrochemical-derived, non-comedogenic

Dipotassium Glycyrrhizate

Dipotassium glycyrrhizinate for moisturizing/soothing; inhibits 5-LOX, water-soluble, for sensitive skin.

Ceramide NP

Ceramide N3 for barrier repair; lipophilic, needs oil phase or emulsion, avoid high standalone use.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Ceramide AP

Ceramide analog for barrier repair; best results when combined with cholesterol and free fatty acids

Ceramide NS

Ceramide NS for barrier repair; gentle and suitable for sensitive or dry skin.

Cholesterol

Cholesterol; barrier repair lipid mimicking stratum corneum; often blended with ceramides, plant or fermentation source.

Phytosphingosine

Phytosphingosine barrier repair ingredient, 0.1–1%; water-soluble, good for dry skin.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Glyceryl Glucoside

Polyol humectant with light, non-sticky feel; less tacky than glycerin

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Polyglyceryl-10 Laurate

Mild non-ionic emulsifier for O/W systems; cetyl ester structure may irritate sensitive skin, use at 0.5-3%.

Anhydroxylitol

Anhydrous xylitol, potent humectant; high hygroscopicity may cause stickiness at high levels.

Acetyl Tetrapeptide-2

Matrixyl; stimulates ECM synthesis for firming/repair, requires adequate dosage.

Hexapeptide-11

Not decoded yet

Palmitoyl Tripeptide-1

Palmitoyl Tripeptide-1 for repair; requires lipid carrier, unstable in aqueous phase

Tripeptide-1

Not decoded yet

Glucose

Low-MW humectant and buffer; high hygroscopicity requires careful preservation and humidity control.

Pantolactone

Pantolactone, humectant; hydrolyzes to release panthenol, improves skin hydration, low level use, high safety

Benzyl Glycol

Solvent and viscosity regulator; aids solubility of actives, slight preservative boost

Hydrolyzed Glycosaminoglycans

Hydrolyzed GAGs for hydration/conditioning; low MW, good penetration, low irritancy.

Palmitoyl Tripeptide-5

Peptide actives for skin conditioning; typically used at low levels.

Ceramide EOP

Ceramide EOP, repairs skin barrier lipids; often blended with cholesterol and fatty acids.

Acetyl Tetrapeptide-5

Acetyl tetrapeptide-5, a moisturizing peptide that enhances skin hydration via hydrolysis, typically mild, used to improve dryness

Sodium Hyaluronate Crosspolymer

Crosslinked high-MW HA; forms surface hydrogel for long-lasting hydration, minimal penetration, physical film-forming.

Hydroxypropyltrimonium Hyaluronate

Cationic hyaluronic acid, 0.1–1%; water-soluble thickener and conditioning agent.

Copper Tripeptide-1

Copper Tripeptide-1 (GHK-Cu) for repair/anti-aging at 0.01–0.1%; water-soluble, avoid chelators.

Hexapeptide-9

Hexapeptide-9 (Acetyl Hexapeptide); signal peptide for fibroblast stimulation, typically used at 0.5-1%.

Palmitoyl Pentapeptide-4

Signal peptide promoting collagen synthesis; effective at low concentration, needs penetration enhancers or encapsulation

Sodium Acetylated Hyaluronate

Acetylated HA; modified for hydrophobicity, improved penetration and non-tacky feel compared to standard HA.

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Related products in this category

• natura-estonica Natura Estonica Purifying Face Scrub
• tesco Tesco Fred & Flo Wipes
• nip-fab Nip+Fab Salicylic Fix Facial Scrub
• nip-fab Nip+Fab Salicylic Fix Concentrate Extreme 2%
• nip-fab Nip+Fab Teen Skin Fix Salicylic Acid Tonic
• nip-fab Nip+Fab Glycolic Fix Extreme Scrub 6%