vult BB Primer Efeito Blur FPS 15

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Aqua
2. Ethylhexyl Triazone
3. Dicaprylyl Ether
4. Xylitol
5. Cyclopentasiloxane
6. Lauryl Methacrylate/Glycol Dimethacrylate Crosspolymer
7. Octocrylene
8. Methyl Methacrylate Crosspolymer
9. Potassium Cetyl Phosphate
10. Propylene Glycol
11. Diethylamino Hydroxybenzoyl Hexyl Benzoate
12. Cyclohexasiloxane
13. Ethylhexylglycerin
14. Behenyl Alcohol
15. Glyceryl Stearate
16. Triethylhexanoin
17. Phenoxyethanol
18. PEG-6 Isostearate
19. Palmitic Acid
20. Dimethiconol
21. Stearic Acid
22. Tocopheryl Acetate
23. Cetyl Alcohol
24. Stearyl Alcohol
25. Triethanolamine
26. Bisabolol
27. Panthenol
28. Ginkgo Biloba Leaf Extract
29. Acrylates/C10-30 Alkyl Acrylate Crosspolymer
30. Hamamelis Virginiana Leaf Extract
31. Disodium EDTA
32. Xanthan Gum
33. Rosa Centifolia Flower Extract
34. Vitis Vinifera Seed Extract
35. Lauryl Alcohol
36. Myristyl Alcohol
37. Lecithin
38. Cetyl Alcohol
39. BHT
40. Sodium Hyaluronate
41. Hesperetin Laurate

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains siliconesContains fragranceContains PEGContains EU-26 allergensContains essential oils

Formulation view Aqueous emulsion with volatile silicones and light esters for smooth application. Contains multiple UVB filters and crosslinked polymers for longevity. Suitable for primers needing makeup grip and light sun protection. Formulator note: Complex UV filters and polymers require attention to photostability and pH sensitivity for storage stability.

Key ingredients

SOLVENT

Aqua

LIGHT STABILIZER

Ethylhexyl TriazoneOctocrylene

SKIN CONDITIONING - EMOLLIENT

Dicaprylyl EtherCyclopentasiloxane

ANTI-SEBORRHEIC

Xylitol

FILM FORMING

Lauryl Methacrylate/Glycol Dimethacrylate CrosspolymerMethyl Methacrylate Crosspolymer

Other ingredients

Potassium Cetyl PhosphatePropylene GlycolDiethylamino Hydroxybenzoyl Hexyl BenzoateCyclohexasiloxaneEthylhexylglycerinBehenyl AlcoholGlyceryl StearateTriethylhexanoinPhenoxyethanolPEG-6 IsostearatePalmitic AcidDimethiconolStearic AcidTocopheryl AcetateCetyl AlcoholStearyl AlcoholTriethanolamineBisabololPanthenolGinkgo Biloba Leaf ExtractAcrylates/C10-30 Alkyl Acrylate CrosspolymerHamamelis Virginiana Leaf ExtractDisodium EDTAXanthan GumRosa Centifolia Flower ExtractVitis Vinifera Seed ExtractLauryl AlcoholMyristyl AlcoholLecithinCetyl AlcoholBHTSodium HyaluronateHesperetin Laurate

Skim through

Ingredients explained

Aqua

Solvent, main base; microbial control is critical

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Dicaprylyl Ether

Lightweight diester solvent and emollient, non-greasy feel; common oil phase carrier; low irritation.

Xylitol

Polyol humectant, sweet taste; water-soluble, high hygroscopy, excess draws moisture.

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Lauryl Methacrylate/Glycol Dimethacrylate Crosspolymer

Film-forming crosspolymer for strong hair hold; low levels yield weak fixation.

Octocrylene

UV-B absorber and photostabilizer; has concentration limits, consider potential coral toxicity and allergenicity for specific groups.

Methyl Methacrylate Crosspolymer

MMA crosspolymer for durable water-soluble film; high doses may create occlusion

Potassium Cetyl Phosphate

Cetyl phosphate potassium, O/W emulsifier; pH-sensitive, often requires buffering.

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Behenyl Alcohol

Fat alcohol emulsifier/thickener at 1-3%; low comedogenic risk, check solubility in strong acid/base systems, add antioxidants.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Triethylhexanoin

Light ester for non-greasy feel and fragrance; low allergenicity, high levels can act as solvent

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

PEG-6 Isostearate

Non-ionic emulsifier for emulsion stability; low MW PEG, no significant irritation or comedogenic data.

Palmitic Acid

Palmitic acid for emulsification/emollient; solid fat, high melting point, occlusive.

Dimethiconol

Dimethiconol; silicone emollient providing silky feel and reducing friction; moderate comedogenicity, avoid excess.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Cetyl Alcohol

Cetyl alcohol for emulsification/thickening; high concentration >10% may irritate.

Stearyl Alcohol

Stearic alcohol; fatty alcohol for emulsion thickening/structure, often blended with soaps, moderate comedogenicity.

Triethanolamine

Triethanolamine for buffering; restricted, limit concentration to avoid high pH and irritation

Bisabolol

Soothing and anti-inflammatory agent, 0.01–0.1%; low irritation, good for sensitive skin.

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Ginkgo Biloba Leaf Extract

Antioxidant and microcirculation modifier rich in flavonoids; requires stability testing to prevent oxidation

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Hamamelis Virginiana Leaf Extract

Witch hazel leaf extract for astringency and skin care; common in soothing formulas

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Rosa Centifolia Flower Extract

Rosa centifolia flower extract, astringent and conditioning; limit concentration, cautious for sensitive skin

Vitis Vinifera Seed Extract

Grape seed extract with OPCs; potent antioxidant; used for skin protection and UV support; needs stabilizers.

Lauryl Alcohol

Fatty alcohol for emulsifying and thickening; low comedogenic, mild irritation possible on dry sensitive skin.

Myristyl Alcohol

Long-chain fatty alcohol for emulsion stability and conditioning; slippery feel, low sensitization, common in creams.

Lecithin

Phospholipid emulsifier at 1-5%; biocompatible, moisturizing/antioxidant, prone to oxidation (add TBHQ), mild for sensitive skin.

Cetyl Alcohol

Cetyl alcohol for emulsification/thickening; high concentration >10% may irritate.

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Hesperetin Laurate

Lipophilic antioxidant (hesperetin laurate) with good stability; used for skin conditioning at low levels.

Related products in this category

• topface Topface Sensitive Mineral Primer Oil
• y-o-u Y.O.U. The Simplicity Perfect Matte Loose Powder
• catrice Catrice Clean ID High Cover Concealer
• catrice Catrice Cover + Care Sensitive Concealer
• hauslabs HausLabs Triclone Skin Tech Medium Coverage Lightweight Liquid Foundation
• rms-beauty RMS Beauty "re" Evolve Radiance Locking Hydrating Primer