Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Oryza Sativa Seed Water
3. Dibutyl Adipate
4. Butyloctyl Salicylate
5. Ethylhexyl Triazone
6. Drometrizole Trisiloxane
7. Polyglyceryl-3 Distearate
8. Terephthalylidene Dicamphor Sulfonic Acid
9. Diethylamino Hydroxybenzoyl Hexyl Benzoate
10. Polymethylsilsesquioxane
11. Tromethamine
12. 1,2-Hexanediol
13. Panthenol
14. Pentylene Glycol
15. Glyceryl Stearate
16. Silica
17. Caprylyl Methicone
18. Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
19. Propanediol
20. Potassium Cetyl Phosphate
21. Poly C10-30 Alkyl Acrylate
22. Methylpropanediol
23. Carbomer
24. Acrylates/C10-30 Alkyl Acrylate Crosspolymer
25. Ethylhexylglycerin
26. Xanthan Gum
27. Glycerin
28. Polyether-1
29. Avena Sativa Kernel Extract
30. Cynara Scolymus Leaf Extract
31. Polyquaternium-51
32. Camellia Sinensis Leaf Water
33. Hydrogenated Lecithin
34. Beta-Glucan
35. Biosaccharide Gum-1
36. Inositol
37. Tocopherol
38. Ferulic Acid
39. Oryza Sativa Bran Oil
40. Citric Acid
41. Ceramide NP
42. Phytosphingosine
43. Sodium Hyaluronate
44. Rice Amino Acids
45. Rice SH-Oligopeptide-1

Highlights

Free of fragranceFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains siliconesContains alcoholContains animal-derived

Formulation view Hybrid sunscreen containing Drometrizole and pH-adjusted with Trometamol. Silicone resins enhance suspension; oat and tea extracts soothe. Suited for sensitive skin. Factory note: precise Trometamol dosage is critical to prevent pH drift affecting filter performance.

Key ingredients

ANTIPLAQUE

Water

ANTIMICROBIAL

Oryza Sativa Seed Water

SKIN CONDITIONING - EMOLLIENT

Dibutyl Adipate

HAIR CONDITIONING

Butyloctyl Salicylate

LIGHT STABILIZER

Ethylhexyl TriazoneDrometrizole TrisiloxaneTerephthalylidene Dicamphor Sulfonic Acid

SURFACTANT - EMULSIFYING

Polyglyceryl-3 Distearate

Other ingredients

Diethylamino Hydroxybenzoyl Hexyl BenzoatePolymethylsilsesquioxaneTromethamine1,2-HexanediolPanthenolPentylene GlycolGlyceryl StearateSilicaCaprylyl MethiconeBis-Ethylhexyloxyphenol Methoxyphenyl TriazinePropanediolPotassium Cetyl PhosphatePoly C10-30 Alkyl AcrylateMethylpropanediolCarbomerAcrylates/C10-30 Alkyl Acrylate CrosspolymerEthylhexylglycerinXanthan GumGlycerinPolyether-1Avena Sativa Kernel ExtractCynara Scolymus Leaf ExtractPolyquaternium-51Camellia Sinensis Leaf WaterHydrogenated LecithinBeta-GlucanBiosaccharide Gum-1InositolTocopherolFerulic AcidOryza Sativa Bran OilCitric AcidCeramide NPPhytosphingosineSodium HyaluronateRice Amino AcidsRice SH-Oligopeptide-1

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Oryza Sativa Seed Water

Rice seed water with peptides/sugars for conditioning/antioxidant; control microbial load and preserve actives in aqueous phase.

Dibutyl Adipate

Light ester, solvent and emollient, fresh feel and volatility, non-comedogenic.

Butyloctyl Salicylate

Oil-soluble exfoliating emollient; avoid for aspirin-sensitive users and high-concentration leave-on products

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Drometrizole Trisiloxane

UVB sunscreens agent; limited by EU, must be used within strict limits.

Polyglyceryl-3 Distearate

Polyglyceryl-3 distearate; natural-origin emulsifier; mild, suitable for sensitive skin, oil phase stable.

Terephthalylidene Dicamphor Sulfonic Acid

UV absorber and light stabilizer; EU regulated, check max levels and formulation stability

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Polymethylsilsesquioxane

Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.

Tromethamine

pH adjuster, alkaline; precise dosing required

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Caprylyl Methicone

Volatile silicone, fresh feel, does not absorb oil, used in foundations and cushions.

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

UV-B absorber, photostable; high purity and low bioaccumulation, check for impurities.

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Potassium Cetyl Phosphate

Cetyl phosphate potassium, O/W emulsifier; pH-sensitive, often requires buffering.

Poly C10-30 Alkyl Acrylate

Synthetic thickener and emulsion stabilizer for gels or emulsions; generally inert to skin; watch residual monomers.

Methylpropanediol

Diol solvent and extraction carrier; enhances solubility of actives, low irritation profile.

Carbomer

Gelling thickener requiring neutralization; watch out for ion compatibility

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Polyether-1

Not decoded yet

Avena Sativa Kernel Extract

Antioxidant and soothing extract; mild abrasive properties, common in conditioning formulas

Cynara Scolymus Leaf Extract

Artichoke leaf extract for skin conditioning; often in botanical blends.

Polyquaternium-51

Not decoded yet

Camellia Sinensis Leaf Water

Green tea leaf water containing polyphenols; offers soothing, astringent, and antioxidant effects, often a base for toners.

Hydrogenated Lecithin

Emulsifier from lecithin; stable, used in powder emulsions

Beta-Glucan

Polysaccharide for soothing and hydration; high MW acts on the surface, poor penetration into deep dermis.

Biosaccharide Gum-1

Biosaccharide Gum-1, fermented colloid for hydration and soothing, low comedogenic.

Inositol

Humectant at 0.5–2%; gentle moisturizing, suitable for sensitive skin

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Ferulic Acid

Antioxidant, often combined with vitamin C and E; 0.5-2%, photolabile

Oryza Sativa Bran Oil

Rice bran oil rich in oryzanol and linoleic acid for conditioning; moderate comedogenic rating, mind oxidative stability.

Citric Acid

Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH

Ceramide NP

Ceramide N3 for barrier repair; lipophilic, needs oil phase or emulsion, avoid high standalone use.

Phytosphingosine

Phytosphingosine barrier repair ingredient, 0.1–1%; water-soluble, good for dry skin.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Rice Amino Acids

Hydrolyzed protein; low MW, boosts hydration and penetration.

Rice SH-Oligopeptide-1

Rice-derived oligopeptide for skin conditioning; limited public data on mechanism, use as trace co-active.

Related products in this category

• natura-estonica Natura Estonica Purifying Face Scrub
• tesco Tesco Fred & Flo Wipes
• nip-fab Nip+Fab Salicylic Fix Facial Scrub
• nip-fab Nip+Fab Salicylic Fix Concentrate Extreme 2%
• nip-fab Nip+Fab Teen Skin Fix Salicylic Acid Tonic
• nip-fab Nip+Fab Glycolic Fix Extreme Scrub 6%