rexaline Hydra-depolluskin

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Aqua
2. Glycerin
3. Alcohol Denat
4. Dimethicone
5. Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
6. Pentylene Glycol
7. Propylene Glycol
8. Phenoxyethanol
9. Propanediol
10. Menthyl Lactate
11. Alcohol
12. Polymethyl Methacrylate
13. Parfum
14. Marrubium Vulgare Extract
15. Dimethicone Crosspolymer
16. Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
17. Dimethiconol
18. Cyclodextrin
19. Titanium Dioxide
20. Isohexadecane
21. Sodium PCA
22. Adenium Obesum Leaf Cell Extract
23. Disodium EDTA
24. Tocopheryl Acetate
25. Triethylene Glycol
26. Iris Florentina Root Extract
27. Polysorbate 60
28. Sorbitan Isostearate
29. Polysorbate 80
30. Sodium Hyaluronate
31. Sodium Lactate
32. Adenosine
33. Moringa Pterygosperma Seed Extract
34. Sorbitan Oleate
35. Retinyl Palmitate
36. Zinc Sulfate
37. Phenethyl Alcohol
38. Citric Acid
39. Disodium Phosphate
40. Sodium Carrageenan
41. Butylene Glycol
42. Hyaluronic Acid
43. Ulmus Davidiana Root Extract
44. Ethylhexylglycerin
45. Salvia Sclarea Extract
46. Sea Salt
47. Malus Domestica Fruit Cell Culture Extract
48. Ci 42090
49. Potassium Sorbate
50. Sodium Benzoate
51. Xanthan Gum
52. Sodium Chloride
53. Sodium Sulfate
54. Lecithin

Highlights

Free of sulfatesFree of formaldehyde releasersContains alcoholContains siliconesContains EU-26 allergensContains fragranceContains mineral oilContains essential oilsContains PEGContains parabens

Key ingredients

SOLVENT

Aqua

DENATURANT

Glycerin

溶剂

Alcohol Denat

ANTIFOAMING

Dimethicone

EMULSION STABILISING

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

SKIN CONDITIONING

Pentylene Glycol

HUMECTANT

Propylene Glycol

ANTIMICROBIAL

Phenoxyethanol

Other ingredients

PropanediolMenthyl LactateAlcoholPolymethyl MethacrylateParfumMarrubium Vulgare ExtractDimethicone CrosspolymerSodium Acrylate/Sodium Acryloyldimethyl Taurate CopolymerDimethiconolCyclodextrinTitanium DioxideIsohexadecaneSodium PCAAdenium Obesum Leaf Cell ExtractDisodium EDTATocopheryl AcetateTriethylene GlycolIris Florentina Root ExtractPolysorbate 60Sorbitan IsostearatePolysorbate 80Sodium HyaluronateSodium LactateAdenosineMoringa Pterygosperma Seed ExtractSorbitan OleateRetinyl PalmitateZinc SulfatePhenethyl AlcoholCitric AcidDisodium PhosphateSodium CarrageenanButylene GlycolHyaluronic AcidUlmus Davidiana Root ExtractEthylhexylglycerinSalvia Sclarea ExtractSea SaltMalus Domestica Fruit Cell Culture ExtractCi 42090Potassium SorbateSodium BenzoateXanthan GumSodium ChlorideSodium SulfateLecithin

Skim through

Ingredients explained

Aqua

Solvent, main base; microbial control is critical

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Alcohol Denat

Denatured ethanol; solvent, penetration enhancer, and quick-dry agent; high % may compromise barrier in dry skin.

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

High-molecular-weight thickener and emulsion stabilizer; requires electrolytes or acid adjustment near isoelectric point for optimal performance.

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Menthyl Lactate

Menthyl lactate, cooling and fragrance agent, provides mild menthol sensation for refreshing

Alcohol

Ethanol for solubility/drying at 5-15%; high conc. is drying/irritating, avoid lip/eye, low residue, balance with humectants.

Polymethyl Methacrylate

PMMA for thickening, suspension, and film; micro-size powder carrier, very low irritation

Parfum

Fragrance for scent; may contain allergens, caution for sensitive skin, full labeling required.

Marrubium Vulgare Extract

Saponarin-rich extract for soothing and hydration; typical in photoprotection or sensitive skin formulas

Dimethicone Crosspolymer

Crosslinked silicone polymer providing silkiness and viscosity control; for hair and skin; inert but hard to biodegrade.

Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Acrylate copolymer for film/thickening; water-soluble, compatible, monitor residual monomers.

Dimethiconol

Dimethiconol; silicone emollient providing silky feel and reducing friction; moderate comedogenicity, avoid excess.

Cyclodextrin

Cyclodextrin; used as a stabilizer or solubilizer to improve solubility of active ingredients and fragrances

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Isohexadecane

Lightweight mineral-oil-derived emollient and solvent; low viscosity, non-comedogenic, improves texture

Sodium PCA

Sodium PCA, NMF component, 1-10% humectant; salty/tacky at high levels.

Adenium Obesum Leaf Cell Extract

Not decoded yet

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Triethylene Glycol

Polyol viscosity regulator and fragrance carrier at 5-15%; avoid excessive stacking with other glycols to manage viscosity.

Iris Florentina Root Extract

Orris root extract, traditional fixative/tonic; contains volatile essentials, check allergen compatibility.

Polysorbate 60

Non-ionic emulsifier and solubilizer for O/W or W/O stability; may cause mild stinging on sensitive skin, typically 1-5%.

Sorbitan Isostearate

Non-ionic emulsifier (low HLB); typically used in blends, low comedogenicity, soft skin feel.

Polysorbate 80

Non-ionic emulsifier and solubilizer; watch for interaction with parabens

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Sodium Lactate

Sodium lactate for moisturizing and exfoliation; pH buffering agent

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Moringa Pterygosperma Seed Extract

Moringa seed extract rich in antioxidants and amino acids; used for skin conditioning, often added as a functional ingredient.

Sorbitan Oleate

Non-ionic emulsifier for oil-in-water systems; plant-derived, check oxidative stability

Retinyl Palmitate

Vitamin A ester for skin conditioning; light-sensitive, requires protection, avoid in pregnancy.

Zinc Sulfate

Antimicrobial and astringent, restricted in oral care; <1% topical, metallic taste, avoid mixing with amino acids

Phenethyl Alcohol

Alcohol with preservative and fragrance properties; 0.5-1%, floral scent, can replace some preservatives

Citric Acid

Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH

Disodium Phosphate

Phosphate buffer for pH adjustment and preservation; water-soluble; high levels may irritate mucous membranes.

Sodium Carrageenan

Seaweed-derived thickener and stabilizer, 0.5-1.5% adjusts viscosity; sensitive to ions, test compatibility with cationic surfactants.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Ulmus Davidiana Root Extract

Plant extract for basic skin conditioning; low usage, ensure raw material consistency

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Salvia Sclarea Extract

Clary sage extract for sebum regulation and soothing; required labeling as fragrance in lip products, potential sensitization at high levels.

Sea Salt

Sea salt for exfoliation/minerals; particle size matters, high ionic strength when dissolved, check compatibility.

Malus Domestica Fruit Cell Culture Extract

Cell-culture apple extract for antioxidant skin conditioning

Ci 42090

Acid Blue 9 lake; for coloring and brow tints. Non-permanent hair dye, watch for lake precipitation and batch shade variance.

Potassium Sorbate

Preservative effective below pH 6; combinable with sodium benzoate

Sodium Benzoate

Preservative booster, effective below pH 4.5; combinable with sorbates

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Sodium Sulfate

Inorganic salt for viscosity; high concentrations cause osmotic dehydration.

Lecithin

Phospholipid emulsifier at 1-5%; biocompatible, moisturizing/antioxidant, prone to oxidation (add TBHQ), mild for sensitive skin.

Related products in this category

• synergie-skin Synergie Skin Suprema-C+ with 20% CMF Tri-acid Complex
• synergie-skin Synergie Skin Vitamin B
• loccitane L´Occitane Aqua Réotier Refreshing Eye Gel
• confianca Confiança Sulfur Soap
• seventyone-percent Seventyone Percent The Blue Lagoon
• florence-by-mills Florence by Mills Spot A Spot