yanbal Total Block Protector Solar SPF 100

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Aqua
2. Diisopropyl Sebacate
3. Isodecyl Neopentanoate
4. Butyl Methoxydibenzoylmethane
5. Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
6. 4-Methylbenzylidene Camphor
7. Ethylhexyl Triazone
8. Cyclohexasiloxane
9. Potassium Cetyl Phosphate
10. Cyclopentasiloxane
11. Glyceryl Stearate
12. Trimethylsiloxysilicate
13. PEG-100 Stearate
14. Phenoxyethanol
15. Decyl Glucoside
16. Parfum
17. Ammonium Acryloyldimethyltaurate/VP Copolymer
18. Ethylhexylglycerin
19. Hydroxyacetophenone
20. Xanthan Gum
21. Tetrasodium EDTA
22. Tocopheryl Acetate
23. Polyacrylamide
24. C13-14 Isoparaffin
25. Propylene Glycol
26. Laureth-7
27. Citric Acid
28. Citronellol

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of essential oilsFree of formaldehyde releasersContains siliconesContains PEGContains EU-26 allergensContains fragranceContains mineral oil

Key ingredients

SOLVENT

Aqua

SKIN CONDITIONING - EMOLLIENT

Diisopropyl SebacateIsodecyl NeopentanoateCyclohexasiloxane

LIGHT STABILIZER

Butyl MethoxydibenzoylmethaneMethylene Bis-Benzotriazolyl Tetramethylbutylphenol4-Methylbenzylidene CamphorEthylhexyl Triazone

Other ingredients

Potassium Cetyl PhosphateCyclopentasiloxaneGlyceryl StearateTrimethylsiloxysilicatePEG-100 StearatePhenoxyethanolDecyl GlucosideParfumAmmonium Acryloyldimethyltaurate/VP CopolymerEthylhexylglycerinHydroxyacetophenoneXanthan GumTetrasodium EDTATocopheryl AcetatePolyacrylamideC13-14 IsoparaffinPropylene GlycolLaureth-7Citric AcidCitronellol

Skim through

Ingredients explained

Aqua

Solvent, main base; microbial control is critical

Diisopropyl Sebacate

Low-viscosity, high-flash-point ester; excellent spreadability, non-greasy feel

Isodecyl Neopentanoate

Volatile dry ester for make-up/emulsions; fast-drying, non-greasy, seal to prevent weight loss.

Butyl Methoxydibenzoylmethane

High-potency UVA filter (Parsol MXX); requires stabilizers and UVB blockers.

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol

UV stabilizer (UV-326/328) preventing photo-degradation of formulas; has EU concentration limit, used in sunscreens.

4-Methylbenzylidene Camphor

UVB filter, requires combination with UVA filters; provides photostability, usage limit by regulation.

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Potassium Cetyl Phosphate

Cetyl phosphate potassium, O/W emulsifier; pH-sensitive, often requires buffering.

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Trimethylsiloxysilicate

Silicate powder, oil-absorbing emollient; insoluble, high levels feel powdery.

PEG-100 Stearate

Non-ionic emulsifier, requires ionics for stability; check PEG for formaldehyde.

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Decyl Glucoside

Mild alkyl glucoside, biodegradable; foam stabilizer, thickens with fatty alcohols, low allergenicity.

Parfum

Fragrance for scent; may contain allergens, caution for sensitive skin, full labeling required.

Ammonium Acryloyldimethyltaurate/VP Copolymer

Cationic polymer providing suspension, thickening, and conditioning; often paired with anionic thickening systems, low usage, imparts slip.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Hydroxyacetophenone

Hydroxyacetophenone as antioxidant; often boosts Vitamin C, works in acidic pH.

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Tetrasodium EDTA

Chelator removing metal ions to enhance antioxidant and preservative efficacy; very low usage, typically 0.05-0.1%, no direct skincare function.

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Polyacrylamide

Film former and thickener for slip and feel; acrylamide monomer residue risk, strict QC required, restriction III/66

C13-14 Isoparaffin

Light hydrocarbon solvent providing emolliency and solubility; non-allergenic, note occlusive nature

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Laureth-7

Mild non-ionic surfactant for emulsification and solubilization; biodegradable

Citric Acid

Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH

Citronellol

Citronellol for fragrance; EU 26 allergen, labeling required above 0.001%.

Related products in this category

• tropic-skincare Tropic skincare Sun Stick SPF 50
• froika Froika Premium Sunscreen Anti Spot
• zelens Zelens Body Defence Sunscreen Broad Spectrum SPF 30
• beauty-made-easy Beauty Made Easy Love U Summer Lip Balm SPF 15
• eva-skin-clinic Eva Skin Clinic Collagen Facial Sun Block
• natura Natura Gel Creme Protetor Facial Fps 60/ Fpuva 20 Pele Mista A Oleosa Fotoequilíbrio - 50G (2020)