simplysiti Dermagic Max Triple Action Moisturiser

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Cyclopentasiloxane
3. Glycerin
4. Niacinamide
5. Cyclohexasiloxane
6. Butylene Glycol
7. Dimethicone
8. 1,2-Hexanediol
9. Panthenol
10. Sodium Chloride
11. Cetyl PEG/PPG-10/1 Dimethicone
12. Phenoxyethanol
13. Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone
14. Hyaluronic Acid
15. Sodium Hyaluronate
16. Hydrolyzed Hyaluronic Acid
17. Betaine
18. Dimethicone/PEG-10/15 Crosspolymer
19. Silica
20. Sodium Citrate
21. Fragrance
22. Allantoin
23. Dimethicone Crosspolymer
24. Pentylene Glycol
25. Dipotassium Glycyrrhizate
26. Methyl Diisopropyl Propionamide
27. Disodium EDTA
28. Dipropylene Glycol
29. Caffeine
30. Ethylhexylglycerin
31. Tocopherol
32. Squalane
33. Panax Ginseng Root Extract
34. Haematococcus Pluvialis Extract
35. Astaxanthin
36. Centella Asiatica Extract
37. Portulaca Oleracea Extract
38. Vitex Agnus Castus Extract
39. Chamomilla Recutita Flower Extract
40. Maltodextrin
41. Orthosiphon Stamineus Extract
42. Xanthan Gum
43. Rosmarinus Officinalis Leaf Extract

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains siliconesContains PEGContains EU-26 allergensContains fragranceContains animal-derivedContains essential oils

Key ingredients

ANTIPLAQUE

Water

SKIN CONDITIONING - EMOLLIENT

CyclopentasiloxaneCyclohexasiloxane

DENATURANT

Glycerin

SMOOTHING

Niacinamide

HUMECTANT

Butylene Glycol

ANTIFOAMING

Dimethicone

SKIN CONDITIONING

1,2-Hexanediol

Other ingredients

PanthenolSodium ChlorideCetyl PEG/PPG-10/1 DimethiconePhenoxyethanolLauryl PEG-9 Polydimethylsiloxyethyl DimethiconeHyaluronic AcidSodium HyaluronateHydrolyzed Hyaluronic AcidBetaineDimethicone/PEG-10/15 CrosspolymerSilicaSodium CitrateFragranceAllantoinDimethicone CrosspolymerPentylene GlycolDipotassium GlycyrrhizateMethyl Diisopropyl PropionamideDisodium EDTADipropylene GlycolCaffeineEthylhexylglycerinTocopherolSqualanePanax Ginseng Root ExtractHaematococcus Pluvialis ExtractAstaxanthinCentella Asiatica ExtractPortulaca Oleracea ExtractVitex Agnus Castus ExtractChamomilla Recutita Flower ExtractMaltodextrinOrthosiphon Stamineus ExtractXanthan GumRosmarinus Officinalis Leaf Extract

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Cetyl PEG/PPG-10/1 Dimethicone

Silicone surfactant, smooth and mild; regulates rheology and adds antistatic benefits

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone

Silicone surfactant at 1–5%; for hair/cleansing, provides smoothness

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Hydrolyzed Hyaluronic Acid

Low-MW humectant with superior penetration vs high-MW; 0.1-0.5% typical, hygroscopic, store dry to prevent clumping.

Betaine

Betaine for mild moisturizing/surfactant; low concentration 1-2% common, high may irritate.

Dimethicone/PEG-10/15 Crosspolymer

Silicone/PEG crosspolymer for film forming and viscosity; low irritation; PEG debate at high conc

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Sodium Citrate

Sodium citrate for buffering and chelating; adjust pH, careful with strong acid reactions.

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Allantoin

Skin soother at 0.5-2%; promotes cell regeneration

Dimethicone Crosspolymer

Crosslinked silicone polymer providing silkiness and viscosity control; for hair and skin; inert but hard to biodegrade.

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Dipotassium Glycyrrhizate

Dipotassium glycyrrhizinate for moisturizing/soothing; inhibits 5-LOX, water-soluble, for sensitive skin.

Methyl Diisopropyl Propionamide

Fragrance ingredient providing herbal or fruity notes; used in low doses; potential allergen, compliance labeling required.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Dipropylene Glycol

Solvent for essential oils; better humectancy than PEG

Caffeine

Active ingredient, 0.1–2%; promotes circulation, irritation risk at high concentration.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Squalane

Emollient from plants or synthetic; light texture

Panax Ginseng Root Extract

Botanical extract for skin and hair conditioning; activity and irritation risk vary by source/purity, patch test for sensitive skin

Haematococcus Pluvialis Extract

Haematococcus pluvialis extract rich in astaxanthin; potent antioxidant; used in anti-aging and photoprotection formulas.

Astaxanthin

Potent lipophilic antioxidant from algae; effective at trace levels (0.001-0.01%), prone to photodegradation, requires encapsulation or protection.

Centella Asiatica Extract

Centella asiatica extract for soothing/repair; low irritation, common in sensitive skin products.

Portulaca Oleracea Extract

Achyronica extract with anti-inflammatory properties; monitor for heavy metals and pesticides, low-risk at typical doses

Vitex Agnus Castus Extract

Agnus-castus extract for astringency; phytoestrogenic activity, avoid in pregnant/hormone-sensitive users.

Chamomilla Recutita Flower Extract

Plant extract, soothing properties; contains natural allergens, high levels may irritate.

Maltodextrin

High-MW multifunctional excipient for thickening, binding, and emulsion stability; inert, non-penetrating conditioning.

Orthosiphon Stamineus Extract

Not decoded yet

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Rosmarinus Officinalis Leaf Extract

Plant extract containing rosmarinic acid etc., with antioxidant and antimicrobial properties; may contain allergenic fragrances, patch test for sensitive skin, typical concentration <1%.

Related products in this category

• origins Origins Precipitation Extra Moisturizing Cream
• conscious-chemist Conscious Chemist Indulge Facial Cream
• esfolio Esfolio Coconut Water Cream
• apivita Apivita Tonic Mountain Tea Moisturizing Body Milk
• apivita Apivita After Sun Cool & Sooth Face & Body Gel-Cream
• moogoo MooGoo Spf 40 Tinted Face Cream (Discontinued)