marcelle New-Age Lumi Power
marcelle Marcelle New-Age Lumi Power lists 31 ingredients on its label, 30 decoded. See what each one does, its irritancy and comedogenic tendency, and its status in national inventories.
Ingredients overview
Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.
Ingredients are listed in label order; the order reflects the label only, not exact concentrations.
- Aqua
- Glycerin
- Isododecane
- Cyclopentasiloxane
- Isopropyl Myristate
- Thermus Thermophillus Ferment
- Hydrogenated Polyisobutene
- Methyl Methacrylate/Glycol Dimethacrylate Crosspolymer
- Xylitylglucoside
- Anhydroxylitol
- Polymethylsilsesquioxane
- Hydrolyzed Candida Saitoana Extract
- Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
- Panthenol
- Sodium Hyaluronate
- Hdi/Trimethylol Hexyllactone Crosspolymer
- Isohexadecane
- Caffeine
- Xylitol
- Ethylhexylglycerin
- Acrylates/C10-30 Alkyl Acrylate Crosspolymer
- Dimethicone/Vinyl Dimethicone Crosspolymer
- Glucose
- Polysorbate 60
- Disodium EDTA
- Cyclohexasiloxane
- Sodium Hydroxide
- Phenoxyethanol
- Citric Acid
- Potassium Sorbate
- Tocopherol
Highlights
Free of alcoholFree of fragranceFree of parabensFree of sulfatesFree of essential oilsFree of formaldehyde releasersContains mineral oilContains siliconesContains PEG
Formulation view Water and polyol base with volatile silicones and light esters for a dry touch. Features probiotic ferment and humectants, plus caffeine and film-formers for matte finish. Ideal for oily skin or makeup primer. Formulator's note: High silicone and polymer content targets suspension and oil control, requiring attention to comedogenic ester levels.
Key ingredients
- SOLVENT
- Aqua
- DENATURANT
- Glycerin
- SKIN CONDITIONING - EMOLLIENT
- IsododecaneCyclopentasiloxaneHydrogenated Polyisobutene
- BINDING
- Isopropyl Myristate
- SKIN CONDITIONING
- Thermus Thermophillus Ferment
- FILM FORMING
- Methyl Methacrylate/Glycol Dimethacrylate Crosspolymer
Other ingredients
XylitylglucosideAnhydroxylitolPolymethylsilsesquioxaneHydrolyzed Candida Saitoana ExtractHydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate CopolymerPanthenolSodium HyaluronateHdi/Trimethylol Hexyllactone CrosspolymerIsohexadecaneCaffeineXylitolEthylhexylglycerinAcrylates/C10-30 Alkyl Acrylate CrosspolymerDimethicone/Vinyl Dimethicone CrosspolymerGlucosePolysorbate 60Disodium EDTACyclohexasiloxaneSodium HydroxidePhenoxyethanolCitric AcidPotassium SorbateTocopherol
Skim through
| Ingredient | What it does | Irritancy | Rating |
|---|---|---|---|
| Aqua | SOLVENT | 0 | Green |
| Glycerin | DENATURANT, HAIR CONDITIONING, HUMECTANT, ORAL CARE, SKIN PROTECTING, SOLVENT, VISCOSITY CONTROLLING, PERFUMING, FRAGRANCE, SKIN CONDITIONING - HUMECTANT | 0 | Green |
| Isododecane | SKIN CONDITIONING - EMOLLIENT, SOLVENT, PERFUMING | 0 | Green |
| Cyclopentasiloxane | SKIN CONDITIONING - EMOLLIENT, HAIR CONDITIONING, SKIN CONDITIONING, SOLVENT | 0 | Green |
| Isopropyl Myristate | BINDING, SKIN CONDITIONING - EMOLLIENT, FRAGRANCE, PERFUMING | 0 | Green |
| Thermus Thermophillus Ferment | SKIN CONDITIONING | 0 | Green |
| Hydrogenated Polyisobutene | SKIN CONDITIONING - EMOLLIENT, SKIN CONDITIONING, VISCOSITY CONTROLLING | 0 | Green |
| Methyl Methacrylate/Glycol Dimethacrylate Crosspolymer | FILM FORMING | 0 | Green |
| Xylitylglucoside | HUMECTANT, SKIN CONDITIONING | 0 | Green |
| Anhydroxylitol | HUMECTANT, SKIN CONDITIONING | 0 | Green |
| Polymethylsilsesquioxane | OPACIFYING | 0 | Green |
| Hydrolyzed Candida Saitoana Extract | Not decoded yet | — | — |
| Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer | EMULSION STABILISING, VISCOSITY CONTROLLING | 0 | Green |
| Panthenol | ANTISTATIC, HAIR CONDITIONING, SKIN CONDITIONING | 0 | Green |
| Sodium Hyaluronate | HUMECTANT, SKIN CONDITIONING | 0 | Green |
| Hdi/Trimethylol Hexyllactone Crosspolymer | ANTICAKING | 0 | Green |
| Isohexadecane | SKIN CONDITIONING - EMOLLIENT, SOLVENT | 0 | Green |
| Caffeine | SKIN CONDITIONING, PERFUMING, FRAGRANCE | 0 | Green |
| Xylitol | ANTI-SEBORRHEIC, DEODORANT, HUMECTANT, FLAVOURING, SKIN CONDITIONING - HUMECTANT | 0 | Green |
| Ethylhexylglycerin | DEODORANT, SKIN CONDITIONING | 0 | Green |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer | EMULSION STABILISING, FILM FORMING, VISCOSITY CONTROLLING | 0 | Green |
| Dimethicone/Vinyl Dimethicone Crosspolymer | SKIN CONDITIONING, VISCOSITY CONTROLLING | 0 | Green |
| Glucose | HUMECTANT | 0 | Green |
| Polysorbate 60 | SURFACTANT - EMULSIFYING, SURFACTANT - CLEANSING | 1 | Green |
| Disodium EDTA | CHELATING, VISCOSITY CONTROLLING | 0 | Green |
| Cyclohexasiloxane | SKIN CONDITIONING - EMOLLIENT, HAIR CONDITIONING, SOLVENT | 0 | Green |
| Sodium Hydroxide | BUFFERING, DENATURANT · 限制 III/15a | 3 | Green |
| Phenoxyethanol | ANTIMICROBIAL, PRESERVATIVE · 限制 V/29 | 1 | Yellow |
| Citric Acid | BUFFERING, CHELATING, FRAGRANCE | 1 | Green |
| Potassium Sorbate | FRAGRANCE, PRESERVATIVE · 限制 V/4 | 0 | Yellow |
| Tocopherol | ANTIOXIDANT, FRAGRANCE, SKIN CONDITIONING - MISCELLANEOUS, SKIN CONDITIONING - OCCLUSIVE | 0 | Green |
Comedogenic ratings need a published source. This batch is not yet sourced, so it is not shown.
Ingredients explained
- Aqua
- Solvent, main base; microbial control is critical
- Glycerin
- Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives
- Isododecane
- Synthetic hydrocarbon solvent providing dry, silky skin feel; high volatility, non-comedogenic, common in sunscreens and foundations, usage 5-30%.
- Cyclopentasiloxane
- Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.
- Isopropyl Myristate
- Light synthetic ester, fast-drying and non-greasy; high comedogenic risk, limit in acne-prone skin
- Thermus Thermophillus Ferment
- Probiotic ferment with humectant properties; use as a low-level skin conditioning agent
- Hydrogenated Polyisobutene
- Hydrogenated polyisobutene; petroleum-derived lubricant forming breathable film; high purity, low irritation/comedogenicity.
- Methyl Methacrylate/Glycol Dimethacrylate Crosspolymer
- MMA/GDMA crosspolymer film former for makeup fixation; high concentrations may cause a heavy, occlusive feel.
- Xylitylglucoside
- Polyol humectant with high water absorption and fresh feel; often co-used with propylene glycol for enhanced hydration.
- Anhydroxylitol
- Anhydrous xylitol, potent humectant; high hygroscopicity may cause stickiness at high levels.
- Polymethylsilsesquioxane
- Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.
- Hydrolyzed Candida Saitoana Extract
- Not decoded yet
- Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
- High-molecular-weight thickener and emulsion stabilizer; requires electrolytes or acid adjustment near isoelectric point for optimal performance.
- Panthenol
- Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery
- Sodium Hyaluronate
- Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture
- Hdi/Trimethylol Hexyllactone Crosspolymer
- Hydrophobic wax for anti-caking; improves slip in powders and cushions
- Isohexadecane
- Lightweight mineral-oil-derived emollient and solvent; low viscosity, non-comedogenic, improves texture
- Caffeine
- Active ingredient, 0.1–2%; promotes circulation, irritation risk at high concentration.
- Xylitol
- Polyol humectant, sweet taste; water-soluble, high hygroscopy, excess draws moisture.
- Ethylhexylglycerin
- Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel
- Acrylates/C10-30 Alkyl Acrylate Crosspolymer
- Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.
- Dimethicone/Vinyl Dimethicone Crosspolymer
- Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.
- Glucose
- Low-MW humectant and buffer; high hygroscopicity requires careful preservation and humidity control.
- Polysorbate 60
- Non-ionic emulsifier and solubilizer for O/W or W/O stability; may cause mild stinging on sensitive skin, typically 1-5%.
- Disodium EDTA
- Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy
- Cyclohexasiloxane
- Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer
- Sodium Hydroxide
- Strong base neutralizer for pH adjustment; handle with extreme care
- Phenoxyethanol
- Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin
- Citric Acid
- Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH
- Potassium Sorbate
- Preservative effective below pH 6; combinable with sodium benzoate
- Tocopherol
- Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light
Source: full ingredient list published on the product label, collected 2026-09-20. Ratings are our internal reading, not a regulatory conclusion. · Product page
Want to build one like this? Send an enquiry