SHISEIDO (資生堂) 超進化光感緊緻粉底 成份

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Dimethicone
3. Titanium Dioxide
4. Diphenylsiloxy Phenyl Trimethicone
5. Ethylhexyl methoxycinnamate
6. Trifluoropropyldimethyl/trimethylsiloxysilicate
7. Glycerin
8. Iron Oxides
9. Butylene Glycol
10. Hydrogenated Polydecene
11. CI 77491
12. Bis-butyldimethicone polyglyceryl-3
13. Disteardimonium Hectorite
14. Titanium Dioxide
15. Sorbitan sesquiisostearate
16. Xylitol
17. Erythritol
18. Dimethicone/PEG-10/15 Crosspolymer
19. Mica
20. Barium Sulfate
21. Phenoxyethanol
22. Synthetic fluorphlogopite
23. Aluminum hydroxide
24. Polysilicone-2
25. Disodium EDTA
26. Stearic Acid
27. Calcium aluminum borosilicate
28. Tocopherol
29. Dipropylene glycol
30. Triethoxycaprylylsilane
31. Triethoxysilylethyl Polydimethylsiloxyethyl Dimethicone
32. Polyquaternium-51
33. BHT
34. Citrus Unshiu Peel Extract
35. Thymus serpyllum
36. Alumina
37. Fagus Sylvatica Bud Extract
38. Hydrolyzed conchiolin protein
39. Polymethylsilsesquioxane
40. Dimethicone/Vinyl Dimethicone Crosspolymer

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of essential oilsFree of formaldehyde releasersContains siliconesContains fragranceContains mineral oilContains PEGContains animal-derived

Key ingredients

ANTIPLAQUE

Water

ANTIFOAMING

DimethiconeDiphenylsiloxy Phenyl Trimethicone

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

LIGHT STABILIZER

Ethylhexyl methoxycinnamate

BINDING

Trifluoropropyldimethyl/trimethylsiloxysilicate

DENATURANT

Glycerin

着色剂

Iron Oxides

Other ingredients

Butylene GlycolHydrogenated PolydeceneCI 77491Bis-butyldimethicone polyglyceryl-3Disteardimonium HectoriteTitanium DioxideSorbitan sesquiisostearateXylitolErythritolDimethicone/PEG-10/15 CrosspolymerMicaBarium SulfatePhenoxyethanolSynthetic fluorphlogopiteAluminum hydroxidePolysilicone-2Disodium EDTAStearic AcidCalcium aluminum borosilicateTocopherolDipropylene glycolTriethoxycaprylylsilaneTriethoxysilylethyl Polydimethylsiloxyethyl DimethiconePolyquaternium-51BHTCitrus Unshiu Peel ExtractThymus serpyllumAluminaFagus Sylvatica Bud ExtractHydrolyzed conchiolin proteinPolymethylsilsesquioxaneDimethicone/Vinyl Dimethicone Crosspolymer

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Diphenylsiloxy Phenyl Trimethicone

Phenyl trimethicone for anti-foaming and slip; silicone-based, silky feel

Ethylhexyl methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Trifluoropropyldimethyl/trimethylsiloxysilicate

Fluorosilicone copolymer for dry touch and adhesion; inert silicone, low irritancy, enhances makeup longevity.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Hydrogenated Polydecene

Hydrogenated polydecene, light mineral oil alternative, low comedogenic; silky, non-greasy.

CI 77491

Iron oxides red; physical pigment. Coloring and photo-protective, stable and non-irritating.

Bis-butyldimethicone polyglyceryl-3

Not decoded yet

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Sorbitan sesquiisostearate

Non-ionic emulsifier for O/W systems; very low irritation when pure, but patch testing is recommended for sensitive consumers.

Xylitol

Polyol humectant, sweet taste; water-soluble, high hygroscopy, excess draws moisture.

Erythritol

Polyol humectant with light feel; high hygroscopy, watch in dry climates.

Dimethicone/PEG-10/15 Crosspolymer

Silicone/PEG crosspolymer for film forming and viscosity; low irritation; PEG debate at high conc

Mica

Mineral colorant for pearlescence; heavy metal screening required

Barium Sulfate

Inert mineral filler and thickener; not absorbed by skin, avoid dust inhalation in powder processes

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Synthetic fluorphlogopite

Mica filler at 1-10%; luster/thickening, inert, verify mineral purity, no public comedogenic data.

Aluminum hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Polysilicone-2

Not decoded yet

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Calcium aluminum borosilicate

Synthetic powder filler for smooth feel and coverage; inert.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Dipropylene glycol

Solvent for essential oils; better humectancy than PEG

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Triethoxysilylethyl Polydimethylsiloxyethyl Dimethicone

Silane-modified silicone enhancing adhesion to skin; silicone-based conditioner

Polyquaternium-51

Not decoded yet

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Citrus Unshiu Peel Extract

Citrus peel extract providing fragrance

Thymus serpyllum

Not decoded yet

Alumina

Alumina, inorganic abrasive/thickener; nano-grade requires inhalation risk assessment.

Fagus Sylvatica Bud Extract

Botanical bud extract used as a tonic and skin conditioner; monitor for plant-derived contact sensitization.

Hydrolyzed conchiolin protein

Hydrolyzed pearl protein for hydration/repair; animal-derived; low MW aids penetration, low sensitization

Polymethylsilsesquioxane

Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.