vision Face Fluid Spf 50

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Aqua
2. Dibutyl Adipate
3. Nylon-12
4. Butyl Methoxydibenzoylmethane
5. Octocrylene
6. Dicaprylyl Carbonate
7. Diethylamino Hydroxybenzoyl Hexyl Benzoate
8. Ethylhexyl Salicylate
9. Glycerin
10. PEG-30 Dipolyhydroxystearate
11. Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
12. Caprylic/Capric Triglyceride
13. Titanium Dioxide
14. Triglyceride
15. C12-15 Alkyl Benzoate
16. Tris-Biphenyl Triazine
17. Dimethicone
18. Polyglyceryl 3 Diisostearate
19. Sodium Chloride
20. Saccharide Isomerate
21. Phenoxyethanol
22. Ethylhexyl Triazone
23. Phenylbenzimidazole Sulfonic Acid
24. Silica
25. Decyl Glucoside
26. Aminomethyl Propanol
27. Stearalkonium Hectorite
28. Caprylyl Glycol
29. Alcohol
30. Laminaria Ochroleuca Extract
31. Propylene Carbonate
32. Piroctone Olamine
33. Sodium Ascorbyl Phosphate
34. Hydrogenated Phosphatidylcholine
35. Disodium EDTA
36. Disodium Phosphate
37. Butylene Glycol
38. Citric Acid
39. Sodium Citrate
40. Xanthan Gum
41. Cholesterol
42. Tocopherol

Highlights

Free of fragranceFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains PEGContains siliconesContains alcoholContains EU-26 allergensContains animal-derived

Key ingredients

SOLVENT

Aqua

SKIN CONDITIONING - EMOLLIENT

Dibutyl AdipateDicaprylyl Carbonate

LIGHT STABILIZER

Butyl MethoxydibenzoylmethaneOctocryleneDiethylamino Hydroxybenzoyl Hexyl BenzoateEthylhexyl Salicylate

DENATURANT

Glycerin

Other ingredients

Nylon-12PEG-30 DipolyhydroxystearateBis-Ethylhexyloxyphenol Methoxyphenyl TriazineCaprylic/Capric TriglycerideTitanium DioxideTriglycerideC12-15 Alkyl BenzoateTris-Biphenyl TriazineDimethiconePolyglyceryl 3 DiisostearateSodium ChlorideSaccharide IsomeratePhenoxyethanolEthylhexyl TriazonePhenylbenzimidazole Sulfonic AcidSilicaDecyl GlucosideAminomethyl PropanolStearalkonium HectoriteCaprylyl GlycolAlcoholLaminaria Ochroleuca ExtractPropylene CarbonatePiroctone OlamineSodium Ascorbyl PhosphateHydrogenated PhosphatidylcholineDisodium EDTADisodium PhosphateButylene GlycolCitric AcidSodium CitrateXanthan GumCholesterolTocopherol

Skim through

Ingredients explained

Aqua

Solvent, main base; microbial control is critical

Dibutyl Adipate

Light ester, solvent and emollient, fresh feel and volatility, non-comedogenic.

Nylon-12

Not decoded yet

Butyl Methoxydibenzoylmethane

High-potency UVA filter (Parsol MXX); requires stabilizers and UVB blockers.

Octocrylene

UV-B absorber and photostabilizer; has concentration limits, consider potential coral toxicity and allergenicity for specific groups.

Dicaprylyl Carbonate

Light emollient solvent at 5–15%; mineral oil-free, refreshing feel, low sensitization.

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Ethylhexyl Salicylate

Ethylhexyl salicylate, UVB absorber; volatile, requires combination with UVA filters for broad spectrum.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

PEG-30 Dipolyhydroxystearate

W/O emulsifier for fatty acids; contains PEG, verify preservative compatibility.

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

UV-B absorber, photostable; high purity and low bioaccumulation, check for impurities.

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Triglyceride

Not decoded yet

C12-15 Alkyl Benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Tris-Biphenyl Triazine

Not decoded yet

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Polyglyceryl 3 Diisostearate

Not decoded yet

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Saccharide Isomerate

Novel polyol humectant with skin feel improvement; high hydration, suitable for lightweight formulas.

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Phenylbenzimidazole Sulfonic Acid

UV absorber and light stabilizer; compliant use required, common in sunscreens

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Decyl Glucoside

Mild alkyl glucoside, biodegradable; foam stabilizer, thickens with fatty alcohols, low allergenicity.

Aminomethyl Propanol

pH buffer at 0.1–1%; irritating at high levels, avoid direct mixing with strong acids/bases

Stearalkonium Hectorite

Inorganic clay gellant with silky feel; must disperse well, high local dose can irritate.

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Alcohol

Ethanol for solubility/drying at 5-15%; high conc. is drying/irritating, avoid lip/eye, low residue, balance with humectants.

Laminaria Ochroleuca Extract

Brown algae extract for hydration and film-forming; high loads may affect clarity.

Propylene Carbonate

Inert solvent and viscosity modifier; often used as penetration enhancer, mild at low levels

Piroctone Olamine

Antifungal/antiseborrheic agent; high-concentration irritation; avoid eye area.

Sodium Ascorbyl Phosphate

Vitamin C derivative antioxidant at 0.5–2%; light-sensitive, requires opaque packaging

Hydrogenated Phosphatidylcholine

Hydrogenated phosphatidylcholine, bio-mimetic emulsifier; gentle emulsifier and skin conditioner, suitable for liposomal systems.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Disodium Phosphate

Phosphate buffer for pH adjustment and preservation; water-soluble; high levels may irritate mucous membranes.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Citric Acid

Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH

Sodium Citrate

Sodium citrate for buffering and chelating; adjust pH, careful with strong acid reactions.

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Cholesterol

Cholesterol; barrier repair lipid mimicking stratum corneum; often blended with ceramides, plant or fermentation source.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Related products in this category

• a-florence-skincare A.Florence Skincare Hydration Booster Mist
• a-florence-skincare A.Florence Skincare Skin Barrier Restoring Oil
• im-from I'm From Mugwort Spot Gel
• im-from I'm From Mugwort Sheet Mask
• im-from I'm From Ginseng Eye Cream (Discontinued)
• pixi Pixi Retinol Eye Cream