Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Cyclopentasiloxane
3. Titanium Dioxide
4. Ethylhexyl Methoxycinnamate
5. Methyl Methacrylate Crosspolymer
6. Zinc Oxide
7. Ethylhexyl Salicylate
8. Butylene Glycol
9. Methyl Trimethicone
10. Dimethicone
11. Cetyl PEG/PPG-10/1 Dimethicone
12. Glycerin
13. Niacinamide
14. Pentylene Glycol
15. Silica
16. Caprylyl Methicone
17. Butylene Glycol Dicaprylate/Dicaprate
18. Lauryl PEG-10 Tris silylethyl Dimethicone
19. PEG/PPG-17/6 Copolymer
20. Magnesium Sulfate
21. Phenoxyethanol
22. Dimethicone/Vinyl Dimethicone Crosspolymer
23. Sorbitan Isostearate
24. Aluminum Hydroxide
25. Iron Oxide Yellow
26. Disteardimonium Hectorite
27. Stearic Acid
28. Triethoxycaprylylsilane
29. Iron Oxide Red
30. Fragrance
31. Iron Oxide Black
32. Ethylhexylglycerin
33. Adenosine
34. Disodium EDTA
35. Camellia Sinensis Seed Oil
36. Carthamus Tinctorius Seed Oil
37. Ceramide NP
38. Helianthus Annuus Seed Oil
39. Panthenol
40. Jasminum Officinale Flower/Leaf Extract
41. Nelumbo Nucifera Extract
42. Freesia Refracta Extract
43. Iris Ensata Extract
44. Iris Versicolor Extract
45. Leontopodium Alpinum Flower/Leaf Extract
46. Lilium Candidum Bulb Extract
47. Narcissus Pseudonarcissus Flower Extract
48. Rose Extract

Highlights

Free of parabensFree of sulfatesFree of formaldehyde releasersContains siliconesContains PEGContains alcoholContains EU-26 allergensContains fragranceContains mineral oilContains essential oils

Formulation view Hybrid sunscreen combining physical (zinc oxide) and chemical filters, with a cyclomethicone base for smooth spreading. Added niacinamide, panthenol, and tea tree extract for soothing and antioxidant benefits. Tinted with titanium dioxide, it serves as a tinted isolation cream with SPF, suitable for combination and oily skin for daily protection.

Key ingredients

ANTIPLAQUE

Water

SKIN CONDITIONING - EMOLLIENT

Cyclopentasiloxane

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

LIGHT STABILIZER

Ethylhexyl MethoxycinnamateEthylhexyl Salicylate

FILM FORMING

Methyl Methacrylate Crosspolymer

ANTIMICROBIAL

Zinc Oxide

HUMECTANT

Butylene Glycol

Other ingredients

Methyl TrimethiconeDimethiconeCetyl PEG/PPG-10/1 DimethiconeGlycerinNiacinamidePentylene GlycolSilicaCaprylyl MethiconeButylene Glycol Dicaprylate/DicaprateLauryl PEG-10 Tris silylethyl DimethiconePEG/PPG-17/6 CopolymerMagnesium SulfatePhenoxyethanolDimethicone/Vinyl Dimethicone CrosspolymerSorbitan IsostearateAluminum HydroxideIron Oxide YellowDisteardimonium HectoriteStearic AcidTriethoxycaprylylsilaneIron Oxide RedFragranceIron Oxide BlackEthylhexylglycerinAdenosineDisodium EDTACamellia Sinensis Seed OilCarthamus Tinctorius Seed OilCeramide NPHelianthus Annuus Seed OilPanthenolJasminum Officinale Flower/Leaf ExtractNelumbo Nucifera ExtractFreesia Refracta ExtractIris Ensata ExtractIris Versicolor ExtractLeontopodium Alpinum Flower/Leaf ExtractLilium Candidum Bulb ExtractNarcissus Pseudonarcissus Flower ExtractRose Extract

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Ethylhexyl Methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Methyl Methacrylate Crosspolymer

MMA crosspolymer for durable water-soluble film; high doses may create occlusion

Zinc Oxide

Physical UV filter, 30% max in EU; oily at high levels, pair with oils for feel.

Ethylhexyl Salicylate

Ethylhexyl salicylate, UVB absorber; volatile, requires combination with UVA filters for broad spectrum.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Methyl Trimethicone

Methyl trimethicone, light volatile silicone; non-comedogenic, good powder compatibility.

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Cetyl PEG/PPG-10/1 Dimethicone

Silicone surfactant, smooth and mild; regulates rheology and adds antistatic benefits

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Caprylyl Methicone

Volatile silicone, fresh feel, does not absorb oil, used in foundations and cushions.

Butylene Glycol Dicaprylate/Dicaprate

Light diester emollient, light and non-greasy; often used as solvent; oxidizes easily, needs antioxidants.

Lauryl PEG-10 Tris silylethyl Dimethicone

Silicone polymer for emulsifying and conditioning; provides silky texture, contains PEG and silicones

PEG/PPG-17/6 Copolymer

Non-ionic copolymer used as a solvent and emulsifier aid; PEG component may increase penetration

Magnesium Sulfate

Bulk agent at 0.1–1%; highly water-soluble, avoid high local concentration.

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Sorbitan Isostearate

Non-ionic emulsifier (low HLB); typically used in blends, low comedogenicity, soft skin feel.

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Iron Oxide Yellow

Inorganic yellow pigment for product coloration; functions as a physical cover agent.

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Iron Oxide Red

Inorganic red pigment; restricted from use as a propellant in aerosols by regulation.

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Iron Oxide Black

Black iron oxide; inorganic colorant for cosmetics; stable, non-irritating; common in lipsticks and eyeshadows.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Camellia Sinensis Seed Oil

Camellia seed oil; rich in vitamin E/oleic acid, emollient/antioxidant, light texture.

Carthamus Tinctorius Seed Oil

Natural seed oil rich in linoleic acid; moisturizing, prone to oxidation, needs antioxidants

Ceramide NP

Ceramide N3 for barrier repair; lipophilic, needs oil phase or emulsion, avoid high standalone use.

Helianthus Annuus Seed Oil

Sunflower seed oil for emollient/occlusive; high linoleic acid, low comedogenicity.

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Jasminum Officinale Flower/Leaf Extract

Jasmine flower/leaf extract for fragrance and conditioning; contains allergenic fragrances, caution in sensitive skin

Nelumbo Nucifera Extract

Lotus extract, polyphenols, antioxidant, soothing, non-irritating.

Freesia Refracta Extract

Freesia extract for skin conditioning; phenol-rich, moderate concentration to avoid mild irritation.

Iris Ensata Extract

Iris ensata extract with flavonoids and saponins for conditioning; complex profile, needs stability tests.

Iris Versicolor Extract

Botanical extract; soothing, may trigger sensitivities.

Leontopodium Alpinum Flower/Leaf Extract

Alpine edelweiss flower/leaf extract for skin conditioning; often in soothing claims.

Lilium Candidum Bulb Extract

Lilium candidum bulb extract; polysaccharide-rich skin conditioner; generally mild, check plant protein allergens

Narcissus Pseudonarcissus Flower Extract

Daffodil flower extract, restricted quantity (III/363), iridoid content; for conditioning, watch limits.

Rose Extract

Plant extract for aromatherapy and skin conditioning; verify allergen labeling.

Related products in this category

• sudocrem Sudocrem Antiseptic Healing Cream
• palladio Palladio Rice Paper Oil Blotting Sheets
• chemist-confessions Chemist Confessions The Better Oil
• kayman-beauty Kayman Beauty Coalface Soap (Discontinued)
• hydropeptide HydroPeptide Power Lift (Discontinued)
• lyonsleaf Lyonsleaf Unfragranced Beauty Balm