trend-it-up trend IT UP Rosy Touch Make-Up

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Aqua
2. Dimethicone
3. C11-12 Isoparaffin
4. Cetyl PEG/PPG-10/1 Dimethicone
5. Glycerin
6. Polyglyceryl-4 Isostearate
7. Sorbitan Isostearate
8. Trimethylsiloxysilicate
9. Mica
10. Magnesium Sulfate
11. Phenyl Trimethicone
12. Silica
13. Phenoxyethanol
14. Polypropylsilsesquioxane
15. Synthetic Beeswax
16. Dimethicone Crosspolymer
17. Disteardimonium Hectorite
18. Hydroxyethylcellulose
19. Tocopheryl Acetate
20. Sodium Dehydroacetate
21. Behenyl Beeswax
22. Stearyl Beeswax
23. Parfum
24. Benzoic Acid
25. Aluminum Hydroxide
26. Dehydroacetic Acid
27. Alcohol Denat
28. Talc
29. Triethoxycaprylylsilane
30. Sodium Citrate
31. Soluble Collagen
32. Linalool
33. Ethylhexylglycerin
34. Ci 77891
35. Ci 77492
36. Ci 77491
37. Ci 77499

Highlights

Free of parabensFree of sulfatesFree of essential oilsFree of formaldehyde releasersContains siliconesContains mineral oilContains PEGContains animal-derivedContains EU-26 allergensContains fragranceContains alcohol

Formulation view This makeup base relies on a dimethicone core with silicate powders and inorganic fillers. Its primary function is to provide smooth spreadability and oil control, with minimal hydration from glycerin and film-formers for longevity. Ideal for oily or combination skin, especially in hot conditions. A formulation observation notes the high ratio of volatile silicones and powders reduces greasiness, but users should be aware of potential dryness or flaking, recommending a moisturized base.

Key ingredients

SOLVENT

Aqua

ANTIFOAMING

DimethiconeTrimethylsiloxysilicate

SKIN CONDITIONING

C11-12 Isoparaffin

SURFACTANT - EMULSIFYING

Cetyl PEG/PPG-10/1 DimethiconePolyglyceryl-4 IsostearateSorbitan Isostearate

DENATURANT

Glycerin

Other ingredients

MicaMagnesium SulfatePhenyl TrimethiconeSilicaPhenoxyethanolPolypropylsilsesquioxaneSynthetic BeeswaxDimethicone CrosspolymerDisteardimonium HectoriteHydroxyethylcelluloseTocopheryl AcetateSodium DehydroacetateBehenyl BeeswaxStearyl BeeswaxParfumBenzoic AcidAluminum HydroxideDehydroacetic AcidAlcohol DenatTalcTriethoxycaprylylsilaneSodium CitrateSoluble CollagenLinaloolEthylhexylglycerinCi 77891Ci 77492Ci 77491Ci 77499

Skim through

Ingredients explained

Aqua

Solvent, main base; microbial control is critical

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

C11-12 Isoparaffin

Light mineral oil solvent for spreadability; low irritancy.

Cetyl PEG/PPG-10/1 Dimethicone

Silicone surfactant, smooth and mild; regulates rheology and adds antistatic benefits

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Polyglyceryl-4 Isostearate

Emulsifier at 1–5%; mild type, suitable for sensitive skin formulas

Sorbitan Isostearate

Non-ionic emulsifier (low HLB); typically used in blends, low comedogenicity, soft skin feel.

Trimethylsiloxysilicate

Silicate powder, oil-absorbing emollient; insoluble, high levels feel powdery.

Mica

Mineral colorant for pearlescence; heavy metal screening required

Magnesium Sulfate

Bulk agent at 0.1–1%; highly water-soluble, avoid high local concentration.

Phenyl Trimethicone

Aromatic modified silicone for high gloss and occlusion; inert, non-volatile, may leave surface residue

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Polypropylsilsesquioxane

Propylsilsesquioxane, volatile silicone film former; smooths, low occlusion, very low comedogenic risk

Synthetic Beeswax

Synthetic wax for binding/emulsion stability; replaces natural wax, lower allergenic risk

Dimethicone Crosspolymer

Crosslinked silicone polymer providing silkiness and viscosity control; for hair and skin; inert but hard to biodegrade.

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Hydroxyethylcellulose

Water-soluble cellulose ether for thickening and suspension stabilization; sensitive to ions, electrolytes reduce viscosity, use at pH 7-8.

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Sodium Dehydroacetate

Sodium dehydroacetate, preservative <0.5%; restricted for eye, children, and lip use.

Behenyl Beeswax

Not decoded yet

Stearyl Beeswax

Not decoded yet

Parfum

Fragrance for scent; may contain allergens, caution for sensitive skin, full labeling required.

Benzoic Acid

Preservative and pH adjuster at 0.1–0.5%; low water solubility, best in acidic media, irritant at high levels.

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Dehydroacetic Acid

Broad-spectrum preservative for acidic and oil-based systems; has concentration limits, requires challenge testing.

Alcohol Denat

Denatured ethanol; solvent, penetration enhancer, and quick-dry agent; high % may compromise barrier in dry skin.

Talc

Inorganic mineral powder for texture and oil absorption; must be asbestos-free; fineness affects skin feel and safety, avoid inhalation.

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Sodium Citrate

Sodium citrate for buffering and chelating; adjust pH, careful with strong acid reactions.

Soluble Collagen

Water-soluble collagen for hydration, film-forming, hair care; MW affects permeation/film

Linalool

Natural fragrance component at ≤0.05%; one of EU 26 allergens, caution for sensitive skin

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Ci 77891

Titanium dioxide inorganic pigment and UV filter; assess inhalation risk for nano-forms and EU restrictions

Ci 77492

Iron oxide red; stable inorganic pigment, non-toxic; ensure dispersion to prevent sedimentation.

Ci 77491

Iron oxides red; physical pigment. Coloring and photo-protective, stable and non-irritating.

Ci 77499

Inorganic colorant manganese dioxide used in cosmetics; restricted use component subject to regulatory limits.

Related products in this category

• synergie-skin Synergie Skin Suprema-C+ with 20% CMF Tri-acid Complex
• synergie-skin Synergie Skin Vitamin B
• loccitane L´Occitane Aqua Réotier Refreshing Eye Gel
• confianca Confiança Sulfur Soap
• seventyone-percent Seventyone Percent The Blue Lagoon
• florence-by-mills Florence by Mills Spot A Spot