INGLOT stick foundation ingredients list

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Octyldodecyl oleate
2. Dicaprylyl Carbonate
3. Hydrogenated Polycyclopentadiene
4. Silica
5. Carnauba Wax
6. Aluminum starch octenylsuccinate
7. Evening Primrose Root Extract
8. Di-PPG-3 Myristyl Ether Adipate
9. Polymethyl Methacrylate
10. Bis-Diglyceryl Polyacyladipate-2
11. Ozokerite
12. Calcium Aluminium Borosilicate
13. Water
14. Caprylyl Glycol
15. Lauroyl lysine
16. Tocopherol
17. Alumina
18. Hexylene Glycol
19. Fragrance
20. Hexyl Cinnamal
21. BHT
22. Butylphenyl Methylpropional

Highlights

Free of alcoholFree of parabensFree of siliconesFree of sulfatesFree of essential oilsFree of formaldehyde releasersContains mineral oilContains PEGContains EU-26 allergensContains fragrance

Key ingredients

SKIN CONDITIONING - EMOLLIENT

Octyldodecyl oleateDicaprylyl CarbonateDi-PPG-3 Myristyl Ether Adipate

DEPILATORY

Hydrogenated Polycyclopentadiene

ABRASIVE

Silica

定型剂，增稠剂，黏合剂，光泽剂，调理剂

Carnauba Wax

ABSORBENT

Aluminum starch octenylsuccinate

FILM FORMING

Polymethyl Methacrylate

Other ingredients

Evening Primrose Root ExtractBis-Diglyceryl Polyacyladipate-2OzokeriteCalcium Aluminium BorosilicateWaterCaprylyl GlycolLauroyl lysineTocopherolAluminaHexylene GlycolFragranceHexyl CinnamalBHTButylphenyl Methylpropional

Skim through

Ingredients explained

Octyldodecyl oleate

Ester lipid providing emollience and lubrication; acts as occlusive to reduce water loss with a non-greasy feel.

Dicaprylyl Carbonate

Light emollient solvent at 5–15%; mineral oil-free, refreshing feel, low sensitization.

Hydrogenated Polycyclopentadiene

Petroleum resin used in depilatories as solvent or melter; high levels may increase irritation risk

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Carnauba Wax

High-melting wax for hardness and gloss; high dosages lead to stiff bar texture.

Aluminum starch octenylsuccinate

Modified starch absorbent at 1–10%; for powder products, oil-absorbing without heavy feel

Evening Primrose Root Extract

Not decoded yet

Di-PPG-3 Myristyl Ether Adipate

Synthetic ester emollient with film-forming properties; PPG-based, check sensitive skin tolerance.

Polymethyl Methacrylate

PMMA for thickening, suspension, and film; micro-size powder carrier, very low irritation

Bis-Diglyceryl Polyacyladipate-2

Not decoded yet

Ozokerite

Mineral ozokerite for viscosity and stabilization; derived from mineral oil, highly comedogenic, avoid facial use.

Calcium Aluminium Borosilicate

Not decoded yet

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Lauroyl lysine

Lauroyl lysine, amino-acid surfactant derivative, mild foaming; often blended to lower irritation.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Alumina

Alumina, inorganic abrasive/thickener; nano-grade requires inhalation risk assessment.

Hexylene Glycol

Polyol solvent and humectant with penetration enhancement; limit concentration to avoid irritation, no specific allergen tag

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Hexyl Cinnamal

Common fragrance component (jasmine/vanilla note); listed EU allergen, requires labeling at >10ppm (leave-on).

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Butylphenyl Methylpropional

Synthetic fragrance with floral notes; EU regulations limit usage, strict monitoring required.