Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Dibutyl Adipate
3. Propanediol
4. Titanium Dioxide
5. Caprylic/Capric Triglyceride
6. C12-15 Alkyl Benzoate
7. Diethylamino Hydroxybenzoyl Hexyl Benzoate
8. Caprylyl Methicone
9. Ethylhexyl Triazone
10. Niacinamide
11. Glycerin
12. Diethylhexyl Butamido Triazone
13. 1,2-Hexanediol
14. Pentylene Glycol
15. Butylene Glycol
16. Betula Platyphylla Japonica Juice
17. Sodium Hyaluronate
18. Hyaluronic Acid
19. Glyceryl Glucoside
20. Panthenol
21. Dipotassium Glycyrrhizate
22. Allantoin
23. Portulaca Oleracea Extract
24. Artemisia Annua Extract
25. Pinus Sylvestris Leaf Oil
26. Anthemis Nobilis Flower Oil
27. Ethylhexylglycerin
28. Dimethicone/Vinyl Dimethicone Crosspolymer
29. Vp/Eicosene Copolymer
30. Trisiloxane
31. Coco-Caprylate/Caprate
32. Sodium Polyacryloyldimethyl Taurate
33. Ammonium Polyacryloyldimethyl Taurate
34. Hydroxypropyl Methylcellulose Stearoxy Ether
35. Dicaprylyl Carbonate
36. Alumina
37. Ascorbic Acid
38. Adenosine
39. Polyhydroxystearic Acid
40. Stearic Acid
41. Dimethiconol
42. Sodium Polyacrylate
43. Triethoxycaprylylsilane
44. Pvm/Ma Copolymer
45. Polyether-1
46. Iron Oxides
47. Iron Oxides
48. T-Butyl Alcohol
49. Xanthan Gum

Highlights

Free of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains siliconesContains fragranceContains essential oilsContains EU-26 allergensContains alcohol

Formulation view Light liquid sunscreen featuring TiO2 and new filters, enriched with dual hyaluronic acids, panthenol, and dipotassium glycyrrhizinate for hydration and repair. Contains botanical extracts. Factory note: Aqueous base with light esters balances texture. Suitable for most skin types, especially sensitive skin seeking gentle hydration; monitor photostability.

Key ingredients

ANTIPLAQUE

Water

SKIN CONDITIONING - EMOLLIENT

Dibutyl Adipate

SOLVENT

Propanediol

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

FRAGRANCE

Caprylic/Capric Triglyceride

ANTIMICROBIAL

C12-15 Alkyl Benzoate

LIGHT STABILIZER

Diethylamino Hydroxybenzoyl Hexyl Benzoate

SKIN CONDITIONING

Caprylyl Methicone

Other ingredients

Ethylhexyl TriazoneNiacinamideGlycerinDiethylhexyl Butamido Triazone1,2-HexanediolPentylene GlycolButylene GlycolBetula Platyphylla Japonica JuiceSodium HyaluronateHyaluronic AcidGlyceryl GlucosidePanthenolDipotassium GlycyrrhizateAllantoinPortulaca Oleracea ExtractArtemisia Annua ExtractPinus Sylvestris Leaf OilAnthemis Nobilis Flower OilEthylhexylglycerinDimethicone/Vinyl Dimethicone CrosspolymerVp/Eicosene CopolymerTrisiloxaneCoco-Caprylate/CaprateSodium Polyacryloyldimethyl TaurateAmmonium Polyacryloyldimethyl TaurateHydroxypropyl Methylcellulose Stearoxy EtherDicaprylyl CarbonateAluminaAscorbic AcidAdenosinePolyhydroxystearic AcidStearic AcidDimethiconolSodium PolyacrylateTriethoxycaprylylsilanePvm/Ma CopolymerPolyether-1Iron OxidesIron OxidesT-Butyl AlcoholXanthan Gum

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Dibutyl Adipate

Light ester, solvent and emollient, fresh feel and volatility, non-comedogenic.

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

C12-15 Alkyl Benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Caprylyl Methicone

Volatile silicone, fresh feel, does not absorb oil, used in foundations and cushions.

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Diethylhexyl Butamido Triazone

Tinosorb S UV filter for UVA; low skin irritancy, photostable, use in sun care formulations.

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Betula Platyphylla Japonica Juice

Birch juice NMF 0.5-5%; aqueous, check preservatives & sugars

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Glyceryl Glucoside

Polyol humectant with light, non-sticky feel; less tacky than glycerin

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Dipotassium Glycyrrhizate

Dipotassium glycyrrhizinate for moisturizing/soothing; inhibits 5-LOX, water-soluble, for sensitive skin.

Allantoin

Skin soother at 0.5-2%; promotes cell regeneration

Portulaca Oleracea Extract

Achyronica extract with anti-inflammatory properties; monitor for heavy metals and pesticides, low-risk at typical doses

Artemisia Annua Extract

Artemisia annua extract used as a natural fragrance ingredient; may cause sensitivity.

Pinus Sylvestris Leaf Oil

Pine leaf oil, woody scent; contains peroxides and monoterpenes, may irritate sensitive skin, add at low temps and control total load.

Anthemis Nobilis Flower Oil

Botanical oil as fragrance and conditioner; contains allergens, dilute and test for sensitization

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Vp/Eicosene Copolymer

Water-soluble film former and thickener; no known irritancy or comedogenic issues.

Trisiloxane

Used as anti-foaming and lubricant; provides silkiness, used at low levels.

Coco-Caprylate/Caprate

Lightweight mid-chain ester, quick spreading, suitable for oily skin, non-comedogenic.

Sodium Polyacryloyldimethyl Taurate

Sodium polyacryloyldimethyl taurate for emulsion stabilization and thickening; ionic polymer, check ion compatibility.

Ammonium Polyacryloyldimethyl Taurate

Cationic water-soluble polymer; stabilizer and conditioner, test compatibility with anions

Hydroxypropyl Methylcellulose Stearoxy Ether

Cellulose derivative for thickening and emulsion stabilization; cold or hot solubility depends on process, confirm dissolution method.

Dicaprylyl Carbonate

Light emollient solvent at 5–15%; mineral oil-free, refreshing feel, low sensitization.

Alumina

Alumina, inorganic abrasive/thickener; nano-grade requires inhalation risk assessment.

Ascorbic Acid

Vitamin C, potent antioxidant requiring acidic environment for stability; oxidizes and discolors easily, needs light and air protection, concentration 1-10%, pure L-ascorbic acid is more irritating.

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Polyhydroxystearic Acid

Emulsifier and stabilizer at 1–3%; non-ionic, prone to hydrolysis.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Dimethiconol

Dimethiconol; silicone emollient providing silky feel and reducing friction; moderate comedogenicity, avoid excess.

Sodium Polyacrylate

Superabsorbent resin, <1%; gels with electrolytes, ionic strength control required.

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Pvm/Ma Copolymer

Film former at 1–5%; for styling/hair care, provides lasting effect

Polyether-1

Not decoded yet

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

T-Butyl Alcohol

Fast-evaporating solvent; sharp odor and potential irritation at high levels, limit usage

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Related products in this category

• natura-estonica Natura Estonica Purifying Face Scrub
• tesco Tesco Fred & Flo Wipes
• nip-fab Nip+Fab Salicylic Fix Facial Scrub
• nip-fab Nip+Fab Salicylic Fix Concentrate Extreme 2%
• nip-fab Nip+Fab Teen Skin Fix Salicylic Acid Tonic
• nip-fab Nip+Fab Glycolic Fix Extreme Scrub 6%