Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Ethylhexyl Methoxycinnamate
3. Glycerin
4. Butylene Glycol
5. Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
6. Diethylamino Hydroxybenzoyl Hexyl Benzoate
7. Dibutyl Adipate
8. Titanium Dioxide
9. Methyl Trimethicone
10. C12-15 Alkyl Benzoate
11. Dimethicone
12. Silica
13. Titanium Dioxide
14. Niacinamide
15. Trisiloxane
16. 1
17. 2-Hexanediol
18. Cetearyl Alcohol
19. Poly C10-30 Alkyl Acrylate
20. Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
21. Aluminum Stearate
22. Alumina
23. Stearic Acid
24. Polyhydroxystearic Acid
25. Polymethyl Methacrylate
26. Acrylates/C10-30 Alkyl Acrylate Crosspolymer
27. Glyceryl Stearate
28. Fragrance
29. Hydrogenated Lecithin
30. Glyceryl Caprylate/Caprate
31. Thymol Trimethoxycinnamate
32. Tromethamine
33. Polyglyceryl-3 Methylglucose Distearate
34. Palmitic Acid
35. Disodium EDTA
36. Ethylhexylglycerin
37. Adenosine
38. Aluminum Hydroxide
39. Iron Oxide Red
40. Sorbitan Isostearate
41. Triethoxycaprylylsilane
42. Iron Oxide Yellow
43. Tocopheryl Acetate
44. 3-O-Ethyl Ascorbic Acid
45. Lactobacillus/Water Hyacinth Ferment
46. Mannitol
47. Propanediol
48. Ethylhexyl Palmitate
49. BHT
50. Limonene
51. Linalool
52. Pentylene Glycol
53. Myristic Acid
54. Phenoxyethanol
55. Lauric Acid
56. Sodium Dehydroacetate
57. Carbomer
58. Sodium Citrate
59. Potassium Sorbate
60. Tocopherol
61. Methoxy PEG-114/Polyepsilon Caprolactone
62. Caprylyl Glycol
63. Prunus Persica Leaf Extract
64. Helianthus Annuus Seed Oil
65. Lysine
66. Arginine
67. Histidine
68. Citric Acid
69. Beta-Carotene
70. Glucose
71. Xylose
72. Biotin
73. Mannose
74. Sodium Chloride
75. Lecithin
76. Hydrogenated Phosphatidylcholine
77. Copper Tripeptide-1
78. Disodium Phosphate
79. Dextrin
80. Hydrolyzed Hibiscus Esculentus Extract
81. Cholesterol
82. Fucose
83. Dipalmitoyl Hydroxyproline
84. Acrylates/Stearyl Methacrylate Copolymer
85. Potassium Chloride
86. Potassium Phosphate
87. Magnesium Chloride
88. Hydrolyzed Millet
89. Calcium Chloride

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains siliconesContains EU-26 allergensContains fragranceContains animal-derivedContains essential oilsContains PEG

Formulation view Loose powder sunscreen blending TiO2 and Al2O3 physical shields with chemical filters. Includes niacinamide, adenosine, and silicones for soft-focus matte effect. Factory note: High pigment load requires ensuring uniform suspension. Best for oily and combination skin for oil control and base makeup; dry skin may experience tightness.

Key ingredients

ANTIPLAQUE

Water

LIGHT STABILIZER

Ethylhexyl MethoxycinnamateDiethylamino Hydroxybenzoyl Hexyl Benzoate

DENATURANT

Glycerin

HUMECTANT

Butylene Glycol

HAIR CONDITIONING

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

SKIN CONDITIONING - EMOLLIENT

Dibutyl Adipate

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

Other ingredients

Methyl TrimethiconeC12-15 Alkyl BenzoateDimethiconeSilicaTitanium DioxideNiacinamideTrisiloxane12-HexanediolCetearyl AlcoholPoly C10-30 Alkyl AcrylateHydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate CopolymerAluminum StearateAluminaStearic AcidPolyhydroxystearic AcidPolymethyl MethacrylateAcrylates/C10-30 Alkyl Acrylate CrosspolymerGlyceryl StearateFragranceHydrogenated LecithinGlyceryl Caprylate/CaprateThymol TrimethoxycinnamateTromethaminePolyglyceryl-3 Methylglucose DistearatePalmitic AcidDisodium EDTAEthylhexylglycerinAdenosineAluminum HydroxideIron Oxide RedSorbitan IsostearateTriethoxycaprylylsilaneIron Oxide YellowTocopheryl Acetate3-O-Ethyl Ascorbic AcidLactobacillus/Water Hyacinth FermentMannitolPropanediolEthylhexyl PalmitateBHTLimoneneLinaloolPentylene GlycolMyristic AcidPhenoxyethanolLauric AcidSodium DehydroacetateCarbomerSodium CitratePotassium SorbateTocopherolMethoxy PEG-114/Polyepsilon CaprolactoneCaprylyl GlycolPrunus Persica Leaf ExtractHelianthus Annuus Seed OilLysineArginineHistidineCitric AcidBeta-CaroteneGlucoseXyloseBiotinMannoseSodium ChlorideLecithinHydrogenated PhosphatidylcholineCopper Tripeptide-1Disodium PhosphateDextrinHydrolyzed Hibiscus Esculentus ExtractCholesterolFucoseDipalmitoyl HydroxyprolineAcrylates/Stearyl Methacrylate CopolymerPotassium ChloridePotassium PhosphateMagnesium ChlorideHydrolyzed MilletCalcium Chloride

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Ethylhexyl Methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

UV-B absorber, photostable; high purity and low bioaccumulation, check for impurities.

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Dibutyl Adipate

Light ester, solvent and emollient, fresh feel and volatility, non-comedogenic.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Methyl Trimethicone

Methyl trimethicone, light volatile silicone; non-comedogenic, good powder compatibility.

C12-15 Alkyl Benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Trisiloxane

Used as anti-foaming and lubricant; provides silkiness, used at low levels.

1

Not decoded yet

2-Hexanediol

2-Hexanediol; branched-chain diol solvent and co-preservative, mild odor, weak humectant.

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

Poly C10-30 Alkyl Acrylate

Synthetic thickener and emulsion stabilizer for gels or emulsions; generally inert to skin; watch residual monomers.

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

High-molecular-weight thickener and emulsion stabilizer; requires electrolytes or acid adjustment near isoelectric point for optimal performance.

Aluminum Stearate

Aluminum stearate used as anticaking, emulsion stabilizer, and viscosity controller; restricted to IV/150 uses, avoid direct contact with acids.

Alumina

Alumina, inorganic abrasive/thickener; nano-grade requires inhalation risk assessment.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Polyhydroxystearic Acid

Emulsifier and stabilizer at 1–3%; non-ionic, prone to hydrolysis.

Polymethyl Methacrylate

PMMA for thickening, suspension, and film; micro-size powder carrier, very low irritation

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Hydrogenated Lecithin

Emulsifier from lecithin; stable, used in powder emulsions

Glyceryl Caprylate/Caprate

Glyceride ester, emulsifier and conditioning; 1–5% typical, low irritancy

Thymol Trimethoxycinnamate

Antioxidant and photo-protective agent; stabilizes products

Tromethamine

pH adjuster, alkaline; precise dosing required

Polyglyceryl-3 Methylglucose Distearate

Non-ionic emulsifier at 1–3%; mild, easily combined with other surfactants.

Palmitic Acid

Palmitic acid for emulsification/emollient; solid fat, high melting point, occlusive.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Iron Oxide Red

Inorganic red pigment; restricted from use as a propellant in aerosols by regulation.

Sorbitan Isostearate

Non-ionic emulsifier (low HLB); typically used in blends, low comedogenicity, soft skin feel.

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Iron Oxide Yellow

Inorganic yellow pigment for product coloration; functions as a physical cover agent.

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

3-O-Ethyl Ascorbic Acid

Water-soluble Vitamin C derivative; more stable than ascorbic acid, sensitive to metals and alkali.

Lactobacillus/Water Hyacinth Ferment

Lactobacillus/water hyacinth ferment; postbiotics with peptides/acids for moisture and microbiome

Mannitol

Polyol humectant with binding/skin conditioning properties; high levels may cause osmotic irritation

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Ethylhexyl Palmitate

Synthetic ester emollient with light skin feel; small molecule, slightly comedogenic, use cautiously for acne-prone skin, often blended with other oils.

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Limonene

Natural fragrance solvent, EU allergen; poor photostability

Linalool

Natural fragrance component at ≤0.05%; one of EU 26 allergens, caution for sensitive skin

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Myristic Acid

Saturated fatty acid, saponification feedstock; insoluble alone, pairs with stearic acid.

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Lauric Acid

Lauric acid for cleansing and emulsification; high comedogenic rating, recommend limiting to 1-2% or combining with other acids.

Sodium Dehydroacetate

Sodium dehydroacetate, preservative <0.5%; restricted for eye, children, and lip use.

Carbomer

Gelling thickener requiring neutralization; watch out for ion compatibility

Sodium Citrate

Sodium citrate for buffering and chelating; adjust pH, careful with strong acid reactions.

Potassium Sorbate

Preservative effective below pH 6; combinable with sodium benzoate

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Methoxy PEG-114/Polyepsilon Caprolactone

PEG-containing reactive resin for film forming and conditioning; restricted ingredient, check compliance.

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Prunus Persica Leaf Extract

Peach leaf extract, used for emollience and moisturizing; a botanical for gentle skin conditioning.

Helianthus Annuus Seed Oil

Sunflower seed oil for emollient/occlusive; high linoleic acid, low comedogenicity.

Lysine

Amino acid conditioner for anti-static hair care; low irritation at typical cosmetic concentrations.

Arginine

Arginine for moisturizing/conditioning; amino acid, high biocompatibility, often used in blends.

Histidine

Amino acid humectant and antistatic agent; pH-dependent behavior, consider buffering in formulation.

Citric Acid

Buffer and chelator at 0.1–2%; adjusts pH, may irritate sensitive skin at low pH

Beta-Carotene

Beta-carotene for color and antioxidants; oil-soluble, protect from oxidation and color change.

Glucose

Low-MW humectant and buffer; high hygroscopicity requires careful preservation and humidity control.

Xylose

Low-MW humectant and fragrance carrier; <5% typical, blends with polyols for texture.

Biotin

Vitamin B7 nutrient claimant; topical effect limited, use at 1-20 ppm.

Mannose

Monosaccharide humectant that binds glycosaminoglycans to enhance hydration; extremely low allergenicity

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Lecithin

Phospholipid emulsifier at 1-5%; biocompatible, moisturizing/antioxidant, prone to oxidation (add TBHQ), mild for sensitive skin.

Hydrogenated Phosphatidylcholine

Hydrogenated phosphatidylcholine, bio-mimetic emulsifier; gentle emulsifier and skin conditioner, suitable for liposomal systems.

Copper Tripeptide-1

Copper Tripeptide-1 (GHK-Cu) for repair/anti-aging at 0.01–0.1%; water-soluble, avoid chelators.

Disodium Phosphate

Phosphate buffer for pH adjustment and preservation; water-soluble; high levels may irritate mucous membranes.

Dextrin

Polymer thickener and binder from starch fermentation; biodegradable, hygroscopic, may affect powder flow

Hydrolyzed Hibiscus Esculentus Extract

Hydrolyzed mucilage proteins acting as a gentle skin conditioner and humectant.

Cholesterol

Cholesterol; barrier repair lipid mimicking stratum corneum; often blended with ceramides, plant or fermentation source.

Fucose

Fucose monosaccharide; used as antioxidant precursor or humectant, low dose, acts with other actives

Dipalmitoyl Hydroxyproline

Lipid peptide for skin conditioning; mimics ceramide function for barrier repair, prone to crystallization

Acrylates/Stearyl Methacrylate Copolymer

Acrylate copolymer thickener; requires neutralization for viscosity stability

Potassium Chloride

Viscosity modifier for gels and shampoos; high concentrations may cause local stinging.

Potassium Phosphate

pH adjuster for buffering systems; 0.1-1%, avoid calcium and magnesium ions

Magnesium Chloride

Inorganic salt for thickening and pH adjustment; 0.1-1%, avoid calcium ions

Hydrolyzed Millet

Hydrolyzed millet with peptides; small molecules for penetration, moisturizing, sensitive skin friendly

Calcium Chloride

Cross-linker and viscosity controller for gels; astringent at high levels, check skin tolerance

Related products in this category

• biafine Biafine Total Emulsion
• boiron-laboratories Boiron Laboratories HOMEOPLASMINE
• lucas-papaw-remedies Lucas’ Papaw Remedies Lucas’ Papaw Ointment
• mother-dirt Mother Dirt AO+ Mist Live Probiotic Spray
• abdiibrahim Abdiibrahim Acnelyse
• necessaire Nécessaire The Sex Gel (Fragrance-Free)