Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Propanediol
3. Dibutyl Adipate
4. Titanium Dioxide
5. Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
6. Butylene Glycol
7. Diethylamino Hydroxybenzoyl Hexyl Benzoate
8. Methyl Trimethicone
9. Butyloctyl Salicylate
10. Niacinamide
11. Phenethyl Benzoate
12. Isononyl Isononanoate
13. Polymethylsilsesquioxane
14. 1,2-Hexanediol
15. Betula Platyphylla Japonica Juice
16. Sodium Hyaluronate
17. Hyaluronic Acid
18. Glyceryl Glucoside
19. Artemisia Annua Extract
20. Anthemis Nobilis Flower Oil
21. Pinus Sylvestris Leaf Oil
22. Allantoin
23. Dipotassium Glycyrrhizate
24. Panthenol
25. Camellia Sinensis Seed Oil
26. Yeast Ferment Extract
27. Candida Bombicola/Glucose/Methyl Rapeseedate Ferment
28. Ethylhexyl Triazone
29. Pentylene Glycol
30. Polyglyceryl-3 Methylglucose Distearate
31. Polysilicone-15
32. Stearic Acid
33. Palmitic Acid
34. Polyhydroxystearic Acid
35. Potassium Cetyl Phosphate
36. Aluminum Hydroxide
37. Glyceryl Stearate
38. Hydroxyacetophenone
39. Poly C10-30 Alkyl Acrylate
40. Isododecane
41. Octyldodecanol
42. Acrylates/C10-30 Alkyl Acrylate Crosspolymer
43. Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
44. Tromethamine
45. Hydrogenated Lecithin
46. Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer
47. Polyglyceryl-4 Isostearate
48. Polyglyceryl-2 Dipolyhydroxystearate
49. Isopropyl Titanium Triisostearate
50. Adenosine
51. Sodium Polyacrylate
52. Sorbitan Isostearate
53. Polymethyl Methacrylate
54. Glyceryl Caprylate
55. Glycerin
56. Ascorbic Acid
57. C12-16 Alcohols
58. Cetearyl Alcohol
59. Disodium EDTA
60. Iron Oxide Yellow
61. Iron Oxide Red
62. Iron Oxide Black

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of formaldehyde releasersContains siliconesContains fragranceContains EU-26 allergensContains essential oilsContains mineral oilContains animal-derivedContains PEG

Formulation view Combines titanium dioxide physical protection with chemical filters. Features niacinamide, yeast ferment, and essential oils for brightening. Suitable for combination to dry skin. Factory note: Balancing mineral powders and essential oils requires precise grinding to avoid discoloration.

Key ingredients

ANTIPLAQUE

Water

SOLVENT

Propanediol

SKIN CONDITIONING - EMOLLIENT

Dibutyl Adipate

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

HAIR CONDITIONING

Bis-Ethylhexyloxyphenol Methoxyphenyl TriazineMethyl Trimethicone

HUMECTANT

Butylene Glycol

LIGHT STABILIZER

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Other ingredients

Butyloctyl SalicylateNiacinamidePhenethyl BenzoateIsononyl IsononanoatePolymethylsilsesquioxane1,2-HexanediolBetula Platyphylla Japonica JuiceSodium HyaluronateHyaluronic AcidGlyceryl GlucosideArtemisia Annua ExtractAnthemis Nobilis Flower OilPinus Sylvestris Leaf OilAllantoinDipotassium GlycyrrhizatePanthenolCamellia Sinensis Seed OilYeast Ferment ExtractCandida Bombicola/Glucose/Methyl Rapeseedate FermentEthylhexyl TriazonePentylene GlycolPolyglyceryl-3 Methylglucose DistearatePolysilicone-15Stearic AcidPalmitic AcidPolyhydroxystearic AcidPotassium Cetyl PhosphateAluminum HydroxideGlyceryl StearateHydroxyacetophenonePoly C10-30 Alkyl AcrylateIsododecaneOctyldodecanolAcrylates/C10-30 Alkyl Acrylate CrosspolymerHydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate CopolymerTromethamineHydrogenated LecithinVinyl Dimethicone/Methicone Silsesquioxane CrosspolymerPolyglyceryl-4 IsostearatePolyglyceryl-2 DipolyhydroxystearateIsopropyl Titanium TriisostearateAdenosineSodium PolyacrylateSorbitan IsostearatePolymethyl MethacrylateGlyceryl CaprylateGlycerinAscorbic AcidC12-16 AlcoholsCetearyl AlcoholDisodium EDTAIron Oxide YellowIron Oxide RedIron Oxide Black

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Dibutyl Adipate

Light ester, solvent and emollient, fresh feel and volatility, non-comedogenic.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

UV-B absorber, photostable; high purity and low bioaccumulation, check for impurities.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Methyl Trimethicone

Methyl trimethicone, light volatile silicone; non-comedogenic, good powder compatibility.

Butyloctyl Salicylate

Oil-soluble exfoliating emollient; avoid for aspirin-sensitive users and high-concentration leave-on products

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Phenethyl Benzoate

Gentle preservative alternative to parabens with mild fragrance; low irritancy, but possesses minor allergic potential.

Isononyl Isononanoate

Light, low-viscosity ester emollient; excellent spreadability, good for gels and light lotions

Polymethylsilsesquioxane

Silicone polymer for emolliency, matte effect, and suspension; used in foundations or powder suspensions, typical usage 1-5%, smooth skin feel.

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Betula Platyphylla Japonica Juice

Birch juice NMF 0.5-5%; aqueous, check preservatives & sugars

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Glyceryl Glucoside

Polyol humectant with light, non-sticky feel; less tacky than glycerin

Artemisia Annua Extract

Artemisia annua extract used as a natural fragrance ingredient; may cause sensitivity.

Anthemis Nobilis Flower Oil

Botanical oil as fragrance and conditioner; contains allergens, dilute and test for sensitization

Pinus Sylvestris Leaf Oil

Pine leaf oil, woody scent; contains peroxides and monoterpenes, may irritate sensitive skin, add at low temps and control total load.

Allantoin

Skin soother at 0.5-2%; promotes cell regeneration

Dipotassium Glycyrrhizate

Dipotassium glycyrrhizinate for moisturizing/soothing; inhibits 5-LOX, water-soluble, for sensitive skin.

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Camellia Sinensis Seed Oil

Camellia seed oil; rich in vitamin E/oleic acid, emollient/antioxidant, light texture.

Yeast Ferment Extract

Fermented humectant, 1-5% common; monitor batch stability, patch test for sensitive skin.

Candida Bombicola/Glucose/Methyl Rapeseedate Ferment

Yeast ferment extract with polysaccharides; used for multifunctional effects, complex profile may sensitise.

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Polyglyceryl-3 Methylglucose Distearate

Non-ionic emulsifier at 1–3%; mild, easily combined with other surfactants.

Polysilicone-15

Not decoded yet

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Palmitic Acid

Palmitic acid for emulsification/emollient; solid fat, high melting point, occlusive.

Polyhydroxystearic Acid

Emulsifier and stabilizer at 1–3%; non-ionic, prone to hydrolysis.

Potassium Cetyl Phosphate

Cetyl phosphate potassium, O/W emulsifier; pH-sensitive, often requires buffering.

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Hydroxyacetophenone

Hydroxyacetophenone as antioxidant; often boosts Vitamin C, works in acidic pH.

Poly C10-30 Alkyl Acrylate

Synthetic thickener and emulsion stabilizer for gels or emulsions; generally inert to skin; watch residual monomers.

Isododecane

Synthetic hydrocarbon solvent providing dry, silky skin feel; high volatility, non-comedogenic, common in sunscreens and foundations, usage 5-30%.

Octyldodecanol

Light emollient/emulsifier at 1-5%; low comedogenic, non-greasy feel, broadly compatible, sensitive-skin friendly.

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

High-molecular-weight thickener and emulsion stabilizer; requires electrolytes or acid adjustment near isoelectric point for optimal performance.

Tromethamine

pH adjuster, alkaline; precise dosing required

Hydrogenated Lecithin

Emulsifier from lecithin; stable, used in powder emulsions

Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer

Rheology-modifying silicone polymer for suspension and feel; requires silicone-compatible system

Polyglyceryl-4 Isostearate

Emulsifier at 1–5%; mild type, suitable for sensitive skin formulas

Polyglyceryl-2 Dipolyhydroxystearate

Plant-derived emulsifier, mild feel; for O/W systems, combine with co-emulsifiers

Isopropyl Titanium Triisostearate

Titanium isostearate complex for UVB absorption and emulsification aid; photostable, low irritancy, low comedogenicity.

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Sodium Polyacrylate

Superabsorbent resin, <1%; gels with electrolytes, ionic strength control required.

Sorbitan Isostearate

Non-ionic emulsifier (low HLB); typically used in blends, low comedogenicity, soft skin feel.

Polymethyl Methacrylate

PMMA for thickening, suspension, and film; micro-size powder carrier, very low irritation

Glyceryl Caprylate

Mild emulsifier/deodorant at 0.5-2%; polyol ester, high humectancy, low irritancy, check cationic surfactant compatibility.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Ascorbic Acid

Vitamin C, potent antioxidant requiring acidic environment for stability; oxidizes and discolors easily, needs light and air protection, concentration 1-10%, pure L-ascorbic acid is more irritating.

C12-16 Alcohols

Fatty alcohol mix for conditioning and stability; very low comedogenicity, enhances feel.

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Iron Oxide Yellow

Inorganic yellow pigment for product coloration; functions as a physical cover agent.

Iron Oxide Red

Inorganic red pigment; restricted from use as a propellant in aerosols by regulation.

Iron Oxide Black

Black iron oxide; inorganic colorant for cosmetics; stable, non-irritating; common in lipsticks and eyeshadows.

Related products in this category

• biafine Biafine Total Emulsion
• boiron-laboratories Boiron Laboratories HOMEOPLASMINE
• lucas-papaw-remedies Lucas’ Papaw Remedies Lucas’ Papaw Ointment
• mother-dirt Mother Dirt AO+ Mist Live Probiotic Spray
• abdiibrahim Abdiibrahim Acnelyse
• necessaire Nécessaire The Sex Gel (Fragrance-Free)