Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Butylene Glycol
3. C12-15 Alkyl Benzoate
4. Ethylhexyl Methoxycinnamate
5. Titanium Dioxide
6. Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
7. Diethylamino Hydroxybenzoyl Hexyl Benzoate
8. Cyclopentasiloxane
9. Silica
10. Cyclohexasiloxane
11. Diphenylsiloxy Phenyl Trimethicone
12. 1,2-Hexanediol
13. Polyacrylate-13
14. Aluminum Stearate
15. Polyhydroxystearic Acid
16. Alumina
17. Polyisobutene
18. Stearic Acid
19. Fragrance
20. Caprylyl Glycol
21. Carbomer
22. Disodium EDTA
23. Ethylhexylglycerin
24. Polysorbate 20
25. Sorbitan Isostearate
26. Iron Oxide Red
27. Iron Oxide Yellow
28. Ceramide NP
29. Propanediol
30. BHT
31. Centella Asiatica Flower/Leaf/Stem Extract
32. Acorus Calamus Root Extract
33. Tocopherol
34. Acetyl Tetrapeptide-5

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains siliconesContains EU-26 allergensContains fragranceContains PEG

Formulation view Water-based sunscreen with titanium dioxide and multiple organic filters for broad-spectrum protection. Silicones and silica improve texture; ceramides and extracts repair the barrier. Suitable for daily commuting and all skin types. Factory note: Cyclopentasiloxane faces strict VOC regulations; compliance must be monitored.

Key ingredients

ANTIPLAQUE

Water

HUMECTANT

Butylene Glycol

ANTIMICROBIAL

C12-15 Alkyl Benzoate

LIGHT STABILIZER

Ethylhexyl MethoxycinnamateDiethylamino Hydroxybenzoyl Hexyl Benzoate

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

HAIR CONDITIONING

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

SKIN CONDITIONING - EMOLLIENT

Cyclopentasiloxane

Other ingredients

SilicaCyclohexasiloxaneDiphenylsiloxy Phenyl Trimethicone1,2-HexanediolPolyacrylate-13Aluminum StearatePolyhydroxystearic AcidAluminaPolyisobuteneStearic AcidFragranceCaprylyl GlycolCarbomerDisodium EDTAEthylhexylglycerinPolysorbate 20Sorbitan IsostearateIron Oxide RedIron Oxide YellowCeramide NPPropanediolBHTCentella Asiatica Flower/Leaf/Stem ExtractAcorus Calamus Root ExtractTocopherolAcetyl Tetrapeptide-5

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

C12-15 Alkyl Benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Ethylhexyl Methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

UV-B absorber, photostable; high purity and low bioaccumulation, check for impurities.

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Diphenylsiloxy Phenyl Trimethicone

Phenyl trimethicone for anti-foaming and slip; silicone-based, silky feel

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Polyacrylate-13

Not decoded yet

Aluminum Stearate

Aluminum stearate used as anticaking, emulsion stabilizer, and viscosity controller; restricted to IV/150 uses, avoid direct contact with acids.

Polyhydroxystearic Acid

Emulsifier and stabilizer at 1–3%; non-ionic, prone to hydrolysis.

Alumina

Alumina, inorganic abrasive/thickener; nano-grade requires inhalation risk assessment.

Polyisobutene

Inert film former and occlusive; increases viscosity, slippery feel, used in lipsticks

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Carbomer

Gelling thickener requiring neutralization; watch out for ion compatibility

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Polysorbate 20

Non-ionic emulsifier and cleansing surfactant; contains PEG, control microbial load.

Sorbitan Isostearate

Non-ionic emulsifier (low HLB); typically used in blends, low comedogenicity, soft skin feel.

Iron Oxide Red

Inorganic red pigment; restricted from use as a propellant in aerosols by regulation.

Iron Oxide Yellow

Inorganic yellow pigment for product coloration; functions as a physical cover agent.

Ceramide NP

Ceramide N3 for barrier repair; lipophilic, needs oil phase or emulsion, avoid high standalone use.

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Centella Asiatica Flower/Leaf/Stem Extract

Repair, antioxidant, soothing extract; aq extracts need sterility and preservatives.

Acorus Calamus Root Extract

Soothing and perfuming extract; volatile oils may cause sensitization at low levels

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Acetyl Tetrapeptide-5

Acetyl tetrapeptide-5, a moisturizing peptide that enhances skin hydration via hydrolysis, typically mild, used to improve dryness

Related products in this category

• biafine Biafine Total Emulsion
• boiron-laboratories Boiron Laboratories HOMEOPLASMINE
• lucas-papaw-remedies Lucas’ Papaw Remedies Lucas’ Papaw Ointment
• mother-dirt Mother Dirt AO+ Mist Live Probiotic Spray
• abdiibrahim Abdiibrahim Acnelyse
• necessaire Nécessaire The Sex Gel (Fragrance-Free)