Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Titanium Dioxide
3. Propanediol
4. Dibutyl Adipate
5. Caprylic/Capric Triglyceride
6. Caprylyl Methicone
7. Glycerin
8. Ethylhexyl Triazone
9. Diethylamino Hydroxybenzoyl Hexyl Benzoate
10. C12-15 Alkyl Benzoate
11. Niacinamide
12. 1,2-Hexanediol
13. Pentylene Glycol
14. Diethylhexyl Butamido Triazone
15. Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer
16. Polyhydroxystearic Acid
17. Iron Oxide Black
18. Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
19. Iron Oxide Yellow
20. Mica
21. Cetearyl Olivate
22. Isohexadecane
23. Alumina
24. Stearic Acid
25. Dimethicone/Vinyl Dimethicone Crosspolymer
26. Sorbitan Olivate
27. Fragrance
28. PEG-240/Hdi Copolymer Bis-Decyltetradeceth-20 Ether
29. Polyglyceryl-10 Decastearate
30. Iron Oxide Red
31. Polyester-1
32. Triethoxycaprylylsilane
33. Silica Dimethyl Silylate
34. Propylheptyl Caprylate
35. Polysorbate 80
36. Polyglyceryl-10 Myristate
37. Ethylhexylglycerin
38. Butylene Glycol
39. Adenosine
40. Sorbitan Oleate
41. Disodium EDTA
42. PEG-7 Glyceryl Cocoate
43. Garcinia Cambogia Fruit Extract
44. 4-Terpineol
45. Carbomer
46. Arginine
47. Yeast Ferment Extract
48. Pseudoalteromonas Ferment Extract
49. Potassium Laurate
50. Polyquaternium-7
51. Methylsilanol Tri-PEG-8 Glyceryl Cocoate
52. BHT
53. Tocopherol
54. Centella Asiatica Leaf Extract
55. Laurus Nobilis Leaf Extract
56. Eucalyptus Globulus Leaf Extract
57. Hydrolyzed Sodium Hyaluronate
58. Hydrolyzed Hyaluronic Acid
59. Hyaluronic Acid
60. Vitis Vinifera Fruit Extract
61. Sodium Hyaluronate
62. Potassium Hyaluronate
63. Diospyros Kaki Leaf Extract
64. Sodium Hyaluronate Crosspolymer
65. Hydroxypropyltrimonium Hyaluronate
66. Polygonum Cuspidatum Root Extract
67. Coffea Arabica Seed Extract
68. Carthamus Tinctorius Flower Extract
69. Zanthoxylum Piperitum Fruit Extract
70. Castanea Crenata Shell Extract
71. Camellia Sinensis Leaf Extract
72. Sodium Acetylated Hyaluronate
73. Asiaticoside
74. Madecassoside
75. Madecassic Acid
76. Asiatic Acid

Highlights

Free of alcoholFree of sulfatesFree of formaldehyde releasersContains siliconesContains mineral oilContains EU-26 allergensContains fragranceContains PEGContains parabensContains essential oils

Formulation view Sunscreen emulsion combining titanium dioxide and chemical filters. Niacinamide and adenosine provide care; silicone polymers improve spreadability. Iron oxides neutralize whiteness. Factory observation: complex filter combination requires compatibility and photostability checks, suitable for daily outdoor protection.

Key ingredients

ANTIPLAQUE

Water

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

SOLVENT

Propanediol

SKIN CONDITIONING - EMOLLIENT

Dibutyl Adipate

FRAGRANCE

Caprylic/Capric Triglyceride

SKIN CONDITIONING

Caprylyl Methicone

DENATURANT

Glycerin

LIGHT STABILIZER

Ethylhexyl Triazone

Other ingredients

Diethylamino Hydroxybenzoyl Hexyl BenzoateC12-15 Alkyl BenzoateNiacinamide1,2-HexanediolPentylene GlycolDiethylhexyl Butamido TriazoneVinyl Dimethicone/Methicone Silsesquioxane CrosspolymerPolyhydroxystearic AcidIron Oxide BlackSodium Acrylate/Sodium Acryloyldimethyl Taurate CopolymerIron Oxide YellowMicaCetearyl OlivateIsohexadecaneAluminaStearic AcidDimethicone/Vinyl Dimethicone CrosspolymerSorbitan OlivateFragrancePEG-240/Hdi Copolymer Bis-Decyltetradeceth-20 EtherPolyglyceryl-10 DecastearateIron Oxide RedPolyester-1TriethoxycaprylylsilaneSilica Dimethyl SilylatePropylheptyl CaprylatePolysorbate 80Polyglyceryl-10 MyristateEthylhexylglycerinButylene GlycolAdenosineSorbitan OleateDisodium EDTAPEG-7 Glyceryl CocoateGarcinia Cambogia Fruit Extract4-TerpineolCarbomerArginineYeast Ferment ExtractPseudoalteromonas Ferment ExtractPotassium LauratePolyquaternium-7Methylsilanol Tri-PEG-8 Glyceryl CocoateBHTTocopherolCentella Asiatica Leaf ExtractLaurus Nobilis Leaf ExtractEucalyptus Globulus Leaf ExtractHydrolyzed Sodium HyaluronateHydrolyzed Hyaluronic AcidHyaluronic AcidVitis Vinifera Fruit ExtractSodium HyaluronatePotassium HyaluronateDiospyros Kaki Leaf ExtractSodium Hyaluronate CrosspolymerHydroxypropyltrimonium HyaluronatePolygonum Cuspidatum Root ExtractCoffea Arabica Seed ExtractCarthamus Tinctorius Flower ExtractZanthoxylum Piperitum Fruit ExtractCastanea Crenata Shell ExtractCamellia Sinensis Leaf ExtractSodium Acetylated HyaluronateAsiaticosideMadecassosideMadecassic AcidAsiatic Acid

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Dibutyl Adipate

Light ester, solvent and emollient, fresh feel and volatility, non-comedogenic.

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Caprylyl Methicone

Volatile silicone, fresh feel, does not absorb oil, used in foundations and cushions.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Ethylhexyl Triazone

UVB absorber with good photostability; formulated with other filters, typical concentration 3-5%, check compatibility with other ingredients.

Diethylamino Hydroxybenzoyl Hexyl Benzoate

Novel UVB absorber at 0.2-1.5%; narrow band, requires combination, high photostability, verify regional limits, low irritation.

C12-15 Alkyl Benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Diethylhexyl Butamido Triazone

Tinosorb S UV filter for UVA; low skin irritancy, photostable, use in sun care formulations.

Vinyl Dimethicone/Methicone Silsesquioxane Crosspolymer

Rheology-modifying silicone polymer for suspension and feel; requires silicone-compatible system

Polyhydroxystearic Acid

Emulsifier and stabilizer at 1–3%; non-ionic, prone to hydrolysis.

Iron Oxide Black

Black iron oxide; inorganic colorant for cosmetics; stable, non-irritating; common in lipsticks and eyeshadows.

Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Acrylate copolymer for film/thickening; water-soluble, compatible, monitor residual monomers.

Iron Oxide Yellow

Inorganic yellow pigment for product coloration; functions as a physical cover agent.

Mica

Mineral colorant for pearlescence; heavy metal screening required

Cetearyl Olivate

Natural emulsifier pairing with glucosides; skin-like feel, biodegradable, prone to oxidation requiring light protection

Isohexadecane

Lightweight mineral-oil-derived emollient and solvent; low viscosity, non-comedogenic, improves texture

Alumina

Alumina, inorganic abrasive/thickener; nano-grade requires inhalation risk assessment.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Sorbitan Olivate

O/W emulsifier, HLB ~15, requires ionic co-surfactant, potential sensitizer.

Fragrance

Fragrance; concentration must control allergen risk, label specific components

PEG-240/Hdi Copolymer Bis-Decyltetradeceth-20 Ether

PEG-modified polymer for light stabilization and thickening. PEG chain may cause irritation or sensitization.

Polyglyceryl-10 Decastearate

Polyglyceryl-10 decastearate; non-ionic surfactant/emulsifier; mild, used in cleansers and emulsions.

Iron Oxide Red

Inorganic red pigment; restricted from use as a propellant in aerosols by regulation.

Polyester-1

Not decoded yet

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Silica Dimethyl Silylate

Dimethicone modified silica for dry touch; anti-caking and oil absorption

Propylheptyl Caprylate

Light ester for smooth, non-volatile feel; non-comedogenic and low irritation

Polysorbate 80

Non-ionic emulsifier and solubilizer; watch for interaction with parabens

Polyglyceryl-10 Myristate

Mild emulsifier and emollient; 1-3%, suitable for O/W systems

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Sorbitan Oleate

Non-ionic emulsifier for oil-in-water systems; plant-derived, check oxidative stability

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

PEG-7 Glyceryl Cocoate

PEG-modified nonionic surfactant for emulsification and cleansing; contains PEG, monitor dioxane, low comedogenicity.

Garcinia Cambogia Fruit Extract

Rich in resveratrol and emodin; used for antioxidant and brightening effects; test for sensitivity at high concentrations

4-Terpineol

Terpene derivative used primarily for fragrance; can be an allergen at high concentrations

Carbomer

Gelling thickener requiring neutralization; watch out for ion compatibility

Arginine

Arginine for moisturizing/conditioning; amino acid, high biocompatibility, often used in blends.

Yeast Ferment Extract

Fermented humectant, 1-5% common; monitor batch stability, patch test for sensitive skin.

Pseudoalteromonas Ferment Extract

Microbial ferment for humectancy and skin conditioning; gentle.

Potassium Laurate

Mild anionic surfactant for cleansing; lower irritation than sodium salts.

Polyquaternium-7

Not decoded yet

Methylsilanol Tri-PEG-8 Glyceryl Cocoate

Not decoded yet

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Centella Asiatica Leaf Extract

Centella asiatica extract for repair and soothing; contains asiaticoside, good for barrier

Laurus Nobilis Leaf Extract

Bay leaf extract with 1,8-cineole; refreshing and astringent, watch for sensitization risk.

Eucalyptus Globulus Leaf Extract

Extract with cooling scent and conditioning; contains essential oil, potential allergen, control dose

Hydrolyzed Sodium Hyaluronate

Low-molecular-weight hyaluronic acid derivative with better penetration and strong hydration; different molecular weights provide hydration at various depths, typical concentration 0.1-1%.

Hydrolyzed Hyaluronic Acid

Low-MW humectant with superior penetration vs high-MW; 0.1-0.5% typical, hygroscopic, store dry to prevent clumping.

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Vitis Vinifera Fruit Extract

Grape fruit extract; rich in polyphenols; skin conditioner; check compatibility with strong oxidizers

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Potassium Hyaluronate

Hyaluronic salt, excellent humectant; efficacy varies with MW, best with occlusive base

Diospyros Kaki Leaf Extract

Persimmon leaf extract with polyphenols, soothing/antibacterial conditioner; botanical, low concentration use

Sodium Hyaluronate Crosspolymer

Crosslinked high-MW HA; forms surface hydrogel for long-lasting hydration, minimal penetration, physical film-forming.

Hydroxypropyltrimonium Hyaluronate

Cationic hyaluronic acid, 0.1–1%; water-soluble thickener and conditioning agent.

Polygonum Cuspidatum Root Extract

Polygonum cuspidatum root extract, source of resveratrol antioxidant; water or alcohol soluble, check color shift with iron ions

Coffea Arabica Seed Extract

Coffee extract for skin conditioning/antioxidants; contains caffeine, watch sensitivity.

Carthamus Tinctorius Flower Extract

Safflower flower extract containing carthamin; used for skin conditioning and antioxidant properties, not primarily a colorant.

Zanthoxylum Piperitum Fruit Extract

Zanthoxylum fruit extract for skin conditioning; contains capsaicinoids, watch for irritation.

Castanea Crenata Shell Extract

Castanea crenata shell extract used as a skin conditioning agent in botanical blends.

Camellia Sinensis Leaf Extract

Green tea extract for antioxidant/astringent; contains caffeine, possible irritation in sensitive skin.

Sodium Acetylated Hyaluronate

Acetylated HA; modified for hydrophobicity, improved penetration and non-tacky feel compared to standard HA.

Asiaticoside

Plant glycoside, healing and antioxidant; poor solubility, use low levels with solubilizers.

Madecassoside

Triterpenoid glycoside with soothing, repairing, and antioxidant effects; typical concentration 0.1-1%, suitable for sensitive or compromised skin, good stability.

Madecassic Acid

Madecassoside hydrolysis product for barrier repair and anti-inflammatory action; mild, low typical usage

Asiatic Acid

Pro-healing active, 0.1–1%; stability affected by light, store protected from light.

Related products in this category

• biafine Biafine Total Emulsion
• boiron-laboratories Boiron Laboratories HOMEOPLASMINE
• lucas-papaw-remedies Lucas’ Papaw Remedies Lucas’ Papaw Ointment
• mother-dirt Mother Dirt AO+ Mist Live Probiotic Spray
• abdiibrahim Abdiibrahim Acnelyse
• necessaire Nécessaire The Sex Gel (Fragrance-Free)