snp Prep Peptaronic Tone Up Cream

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Dimethicone
3. Ci 77891
4. Glycerin
5. Dicaprylyl Carbonate
6. Propanediol
7. Niacinamide
8. Polysorbate 60
9. Cyclopentasiloxane
10. Polyacrylate-13
11. Polyisobutene
12. Dimethicone/Vinyl Dimethicone Crosspolymer
13. Ethylhexylglycerin
14. Aluminum Hydroxide
15. Hydroxyacetophenone
16. Chlorphenesin
17. Ammonium Acryloyldimethyltaurate/VP Copolymer
18. Triethoxycaprylylsilane
19. Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
20. Fragrance
21. Polysorbate 20
22. Sorbitan Isostearate
23. Adenosine
24. Disodium EDTA
25. CI 77947
26. Silica
27. Betaine
28. Synthetic Fluorphlogopite
29. Ci 77491
30. Cyclomethicone
31. Talc
32. Tocopherol
33. PEG-10 Dimethicone
34. Kaolin
35. Propylene Carbonate
36. Disteardimonium Hectorite
37. Butylene Glycol
38. Pentylene Glycol
39. 1,2-Hexanediol
40. Polyglyceryl-10 Laurate
41. Sodium Hyaluronate
42. Caprylyl Glycol
43. Sodium Hyaluronate Crosspolymer
44. Hydrolyzed Hyaluronic Acid
45. Hyaluronic Acid
46. Hydrolyzed Sodium Hyaluronate
47. Hexapeptide-9
48. Palmitoyl Pentapeptide-4
49. Palmitoyl Tripeptide-1
50. Tripeptide-1
51. Copper Tripeptide-1
52. Hexapeptide-11

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains siliconesContains PEGContains EU-26 allergensContains fragrance

Formulation view Dual-phase tone-up cream with titanium dioxide and iron oxides for coverage and color correction. Niacinamide and adenosine provide active care, while silicone-based ingredients ensure a smooth, matte finish. Multiple emulsifiers stabilize the structure. Ideal for daily makeup priming that requires instant brightening. Note: Uniform dispersion of inorganic pigments and silicons is critical to prevent patchy application.

Key ingredients

ANTIPLAQUE

Water

ANTIFOAMING

Dimethicone

COLORANT · 限制 IV

Ci 77891

DENATURANT

Glycerin

SKIN CONDITIONING - EMOLLIENT

Dicaprylyl Carbonate

SOLVENT

Propanediol

SMOOTHING

Niacinamide

SURFACTANT - EMULSIFYING

Polysorbate 60

Other ingredients

CyclopentasiloxanePolyacrylate-13PolyisobuteneDimethicone/Vinyl Dimethicone CrosspolymerEthylhexylglycerinAluminum HydroxideHydroxyacetophenoneChlorphenesinAmmonium Acryloyldimethyltaurate/VP CopolymerTriethoxycaprylylsilaneHydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate CopolymerFragrancePolysorbate 20Sorbitan IsostearateAdenosineDisodium EDTACI 77947SilicaBetaineSynthetic FluorphlogopiteCi 77491CyclomethiconeTalcTocopherolPEG-10 DimethiconeKaolinPropylene CarbonateDisteardimonium HectoriteButylene GlycolPentylene Glycol1,2-HexanediolPolyglyceryl-10 LaurateSodium HyaluronateCaprylyl GlycolSodium Hyaluronate CrosspolymerHydrolyzed Hyaluronic AcidHyaluronic AcidHydrolyzed Sodium HyaluronateHexapeptide-9Palmitoyl Pentapeptide-4Palmitoyl Tripeptide-1Tripeptide-1Copper Tripeptide-1Hexapeptide-11

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Ci 77891

Titanium dioxide inorganic pigment and UV filter; assess inhalation risk for nano-forms and EU restrictions

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Dicaprylyl Carbonate

Light emollient solvent at 5–15%; mineral oil-free, refreshing feel, low sensitization.

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Polysorbate 60

Non-ionic emulsifier and solubilizer for O/W or W/O stability; may cause mild stinging on sensitive skin, typically 1-5%.

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Polyacrylate-13

Not decoded yet

Polyisobutene

Inert film former and occlusive; increases viscosity, slippery feel, used in lipsticks

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Hydroxyacetophenone

Hydroxyacetophenone as antioxidant; often boosts Vitamin C, works in acidic pH.

Chlorphenesin

Phenolic antimicrobial; strict EU limits apply, potential allergen, careful dosing required for leave-on products.

Ammonium Acryloyldimethyltaurate/VP Copolymer

Cationic polymer providing suspension, thickening, and conditioning; often paired with anionic thickening systems, low usage, imparts slip.

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

High-molecular-weight thickener and emulsion stabilizer; requires electrolytes or acid adjustment near isoelectric point for optimal performance.

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Polysorbate 20

Non-ionic emulsifier and cleansing surfactant; contains PEG, control microbial load.

Sorbitan Isostearate

Non-ionic emulsifier (low HLB); typically used in blends, low comedogenicity, soft skin feel.

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

CI 77947

Physical pigment and UV filter; strict particle size requirements for eye/lip.

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Betaine

Betaine for mild moisturizing/surfactant; low concentration 1-2% common, high may irritate.

Synthetic Fluorphlogopite

Mica filler at 1-10%; luster/thickening, inert, verify mineral purity, no public comedogenic data.

Ci 77491

Iron oxides red; physical pigment. Coloring and photo-protective, stable and non-irritating.

Cyclomethicone

Volatile silicone for light feel; contains D4 restricted by EU, must be <0.1% after 2026

Talc

Inorganic mineral powder for texture and oil absorption; must be asbestos-free; fineness affects skin feel and safety, avoid inhalation.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

PEG-10 Dimethicone

Modified silicone for silky feel and shine; PEG structure aids O/W emulsification, used in hair and skin care.

Kaolin

Kaolin absorbent and bulk for powders/masks; check for heavy metals and comply with EU colorant limits IV/119

Propylene Carbonate

Inert solvent and viscosity modifier; often used as penetration enhancer, mild at low levels

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Polyglyceryl-10 Laurate

Mild non-ionic emulsifier for O/W systems; cetyl ester structure may irritate sensitive skin, use at 0.5-3%.

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Sodium Hyaluronate Crosspolymer

Crosslinked high-MW HA; forms surface hydrogel for long-lasting hydration, minimal penetration, physical film-forming.

Hydrolyzed Hyaluronic Acid

Low-MW humectant with superior penetration vs high-MW; 0.1-0.5% typical, hygroscopic, store dry to prevent clumping.

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Hydrolyzed Sodium Hyaluronate

Low-molecular-weight hyaluronic acid derivative with better penetration and strong hydration; different molecular weights provide hydration at various depths, typical concentration 0.1-1%.

Hexapeptide-9

Hexapeptide-9 (Acetyl Hexapeptide); signal peptide for fibroblast stimulation, typically used at 0.5-1%.

Palmitoyl Pentapeptide-4

Signal peptide promoting collagen synthesis; effective at low concentration, needs penetration enhancers or encapsulation

Palmitoyl Tripeptide-1

Palmitoyl Tripeptide-1 for repair; requires lipid carrier, unstable in aqueous phase

Tripeptide-1

Not decoded yet

Copper Tripeptide-1

Copper Tripeptide-1 (GHK-Cu) for repair/anti-aging at 0.01–0.1%; water-soluble, avoid chelators.

Hexapeptide-11

Not decoded yet

Related products in this category

• origins Origins Precipitation Extra Moisturizing Cream
• conscious-chemist Conscious Chemist Indulge Facial Cream
• esfolio Esfolio Coconut Water Cream
• apivita Apivita Tonic Mountain Tea Moisturizing Body Milk
• apivita Apivita After Sun Cool & Sooth Face & Body Gel-Cream
• moogoo MooGoo Spf 40 Tinted Face Cream (Discontinued)