rire Silky & Light Sun Milk SPF 50+

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Cyclopentasiloxane
3. Methyl Methacrylate Crosspolymer
4. Ethylhexyl Methoxycinnamate
5. Ethylhexyl Salicylate
6. Lauryl PEG-10 Tris silylethyl Dimethicone
7. Glycerin
8. C12-15 Alkyl Benzoate
9. Butyl Methoxydibenzoylmethane
10. Niacinamide
11. Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
12. Butyloctyl Salicylate
13. Sodium Chloride
14. Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
15. Decyl Glucoside
16. Xanthan Gum
17. Propylene Glycol
18. Cyclohexasiloxane
19. Galactomyces Ferment Filtrate
20. Butylene Glycol
21. Ethyl Hexanediol
22. Cucumis Sativus Fruit Extract
23. Aloe Barbadensis Leaf Extract
24. Vaccinium Angustifolium Fruit Extract
25. Propolis Extract
26. Zanthoxylum Piperitum Fruit Extract
27. Pulsatilla Koreana Extract
28. Usnea Barbata Extract
29. Isononyl Isononanoate
30. Phenoxyethanol
31. Disteardimonium Hectorite
32. 1,2-Hexanediol
33. Caprylyl Glycol
34. Fragrance
35. Adenosine
36. Allantoin
37. Dipotassium Glycyrrhizate
38. Disodium EDTA

Highlights

Free of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains siliconesContains PEGContains alcoholContains essential oilsContains animal-derivedContains EU-26 allergensContains fragrance

Formulation view A broad-spectrum chemical sunscreen combining UVA/UVB filters like octocrylene and avobenzone for robust protection. Enriched with niacinamide and ferment filtrate, it uses silicones for a silky, matte finish. Ideal for daily outdoor use, especially for those preferring lightweight, non-greasy textures. Formulator Note: The multi-filter approach improves photostability, though high dosages require monitoring for potential pore-clogging effects.

Key ingredients

ANTIPLAQUE

Water

SKIN CONDITIONING - EMOLLIENT

Cyclopentasiloxane

FILM FORMING

Methyl Methacrylate Crosspolymer

LIGHT STABILIZER

Ethylhexyl MethoxycinnamateEthylhexyl Salicylate

乳化剂

Lauryl PEG-10 Tris silylethyl Dimethicone

DENATURANT

Glycerin

ANTIMICROBIAL

C12-15 Alkyl Benzoate

Other ingredients

Butyl MethoxydibenzoylmethaneNiacinamideBis-Ethylhexyloxyphenol Methoxyphenyl TriazineButyloctyl SalicylateSodium ChlorideMethylene Bis-Benzotriazolyl TetramethylbutylphenolDecyl GlucosideXanthan GumPropylene GlycolCyclohexasiloxaneGalactomyces Ferment FiltrateButylene GlycolEthyl HexanediolCucumis Sativus Fruit ExtractAloe Barbadensis Leaf ExtractVaccinium Angustifolium Fruit ExtractPropolis ExtractZanthoxylum Piperitum Fruit ExtractPulsatilla Koreana ExtractUsnea Barbata ExtractIsononyl IsononanoatePhenoxyethanolDisteardimonium Hectorite1,2-HexanediolCaprylyl GlycolFragranceAdenosineAllantoinDipotassium GlycyrrhizateDisodium EDTA

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Methyl Methacrylate Crosspolymer

MMA crosspolymer for durable water-soluble film; high doses may create occlusion

Ethylhexyl Methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Ethylhexyl Salicylate

Ethylhexyl salicylate, UVB absorber; volatile, requires combination with UVA filters for broad spectrum.

Lauryl PEG-10 Tris silylethyl Dimethicone

Silicone polymer for emulsifying and conditioning; provides silky texture, contains PEG and silicones

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

C12-15 Alkyl Benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Butyl Methoxydibenzoylmethane

High-potency UVA filter (Parsol MXX); requires stabilizers and UVB blockers.

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine

UV-B absorber, photostable; high purity and low bioaccumulation, check for impurities.

Butyloctyl Salicylate

Oil-soluble exfoliating emollient; avoid for aspirin-sensitive users and high-concentration leave-on products

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol

UV stabilizer (UV-326/328) preventing photo-degradation of formulas; has EU concentration limit, used in sunscreens.

Decyl Glucoside

Mild alkyl glucoside, biodegradable; foam stabilizer, thickens with fatty alcohols, low allergenicity.

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Galactomyces Ferment Filtrate

Galactomyces ferment filtrate humectant; complex matrix, assess allergens and stability.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Ethyl Hexanediol

Polyol solvent with humectant and mild preservative boost; low viscosity, compatible with many ingredients, gentle.

Cucumis Sativus Fruit Extract

Botanical extract for conditioning; note extraction impact on active retention

Aloe Barbadensis Leaf Extract

Aloe vera leaf extract for soothing and humectant; monitor polysaccharide level and endotoxins

Vaccinium Angustifolium Fruit Extract

Bilberry fruit extract with polyphenols for soothing and skin protection, low concentration

Propolis Extract

Propolis extract for antimicrobial care; complex composition, potential allergy risk.

Zanthoxylum Piperitum Fruit Extract

Zanthoxylum fruit extract for skin conditioning; contains capsaicinoids, watch for irritation.

Pulsatilla Koreana Extract

Herb-based aqueous extract for soothing and conditioning; low usage levels, no significant sensitization

Usnea Barbata Extract

Lichen extract; natural deodorant, contains usnic acid, for oral/body care, avoid dust inhalation.

Isononyl Isononanoate

Light, low-viscosity ester emollient; excellent spreadability, good for gels and light lotions

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Allantoin

Skin soother at 0.5-2%; promotes cell regeneration

Dipotassium Glycyrrhizate

Dipotassium glycyrrhizinate for moisturizing/soothing; inhibits 5-LOX, water-soluble, for sensitive skin.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Related products in this category

• skin-first Skin first Crema Gel SPF 50
• neogen Neogen Daylight Protection Airy Sunscreen SPF50+
• seventyone-percent Seventyone Percent The Sunset
• seventyone-percent Seventyone Percent Eco Sun Spray
• seventyone-percent Seventyone Percent Eco Sun Shield
• apivita Apivita Bee Sun Safe Hydra Protective Sun Filters Hair Oil