doll-face Doll Face Mattify & Perfect Blur Primer Stick
doll-face Doll Face Mattify & Perfect Blur Primer Stick lists 21 ingredients on its label, 19 decoded. See what each one does, its irritancy and comedogenic tendency, and its status in national inventories.
Ingredients overview
Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.
Ingredients are listed in label order; the order reflects the label only, not exact concentrations.
- Propylene Glycol Dicaprylate/Dicaprate
- Trimethylsiloxyphenyl Dimethicone
- Dicaprylyl Carbonate
- Candelilla Cera Wax)
- Polyethylene
- Aluminum Starch Octenylsuccinate
- Mica
- Silica
- Dimethicone
- Dimethicone/Vinyl Dimethicone Crosspolymer
- Talc
- Aqua
- Polysilicone-11
- Tin Oxide
- Triethoxycaprylylsilane
- Isoceteth-10
- Hydrogen Dimethicone
- Methicone
- Aluminum Hydroxide
- Ci 77007
- Ci 77891
Highlights
Free of alcoholFree of fragranceFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains silicones
Formulation view Matte primer stick using propylene glycol diesters as solvent, with silicones, mica, and aluminum starch for oil control. Contains wax for thickening and polyethylene for film formation. Suited for oily skin. Formulator note: Multiple silicone polymers enhance slip and spreadability, paired with oil-absorbing powders. Check regulatory compliance for plastic microbeads and ensure silicone compatibility with subsequent makeup.
Key ingredients
- SKIN CONDITIONING - EMOLLIENT
- Propylene Glycol Dicaprylate/DicaprateDicaprylyl Carbonate
- HAIR CONDITIONING
- Trimethylsiloxyphenyl Dimethicone
- 粘度控制剂
- Candelilla Cera Wax)
- ABRASIVE
- PolyethyleneSilica
- ABSORBENT
- Aluminum Starch Octenylsuccinate
- ANTICAKING
- Mica
Other ingredients
DimethiconeDimethicone/Vinyl Dimethicone CrosspolymerTalcAquaPolysilicone-11Tin OxideTriethoxycaprylylsilaneIsoceteth-10Hydrogen DimethiconeMethiconeAluminum HydroxideCi 77007Ci 77891
Skim through
| Ingredient | What it does | Irr. · Com. | Rating |
|---|---|---|---|
| Propylene Glycol Dicaprylate/Dicaprate | SKIN CONDITIONING - EMOLLIENT | 0 · – | Green |
| Trimethylsiloxyphenyl Dimethicone | HAIR CONDITIONING | 0 · 0 | Green |
| Dicaprylyl Carbonate | SKIN CONDITIONING - EMOLLIENT, SKIN CONDITIONING | 0 · 0 | Green |
| Candelilla Cera Wax) | 粘度控制剂, 成膜剂, 皮肤调理剂 | 0 · 1 | Green |
| Polyethylene | ABRASIVE, FILM FORMING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Aluminum Starch Octenylsuccinate | ABSORBENT, ANTICAKING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Mica | ANTICAKING, BULKING, COLORANT, OPACIFYING | 0 · 0 | Green |
| Silica | ABRASIVE, ABSORBENT, ANTICAKING, BULKING, OPACIFYING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Dimethicone | ANTIFOAMING, SKIN CONDITIONING - EMOLLIENT, SKIN CONDITIONING, SKIN PROTECTING | 0 · 0 | Green |
| Dimethicone/Vinyl Dimethicone Crosspolymer | SKIN CONDITIONING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Talc | ABRASIVE, ABSORBENT, ANTICAKING, BULKING, OPACIFYING, SKIN PROTECTING, SLIP MODIFIER · 限制 III/59 | 0 · – | Yellow |
| Aqua | SOLVENT | 0 · 0 | Green |
| Polysilicone-11 | Not decoded yet | — | — |
| Tin Oxide | ABRASIVE, BULKING, OPACIFYING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Triethoxycaprylylsilane | BINDING | 0 · 0 | Green |
| Isoceteth-10 | Not decoded yet | — | — |
| Hydrogen Dimethicone | FILM FORMING | 0 · 0 | Green |
| Methicone | ANTISTATIC, SKIN CONDITIONING - EMOLLIENT, SKIN CONDITIONING | 0 · – | Green |
| Aluminum Hydroxide | SKIN CONDITIONING - EMOLLIENT, HUMECTANT, OPACIFYING, SKIN PROTECTING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Ci 77007 | COLORANT · 限制 IV/120 | 0 · 0 | Green |
| Ci 77891 | COLORANT · 限制 IV/143 | 0 · – | Green |
Ingredients explained
- Propylene Glycol Dicaprylate/Dicaprate
- Lightweight emollient, low viscosity, refreshes skin feel, high compatibility.
- Trimethylsiloxyphenyl Dimethicone
- Aryl silicone for gloss and slip; non-comedogenic but poor biodegradability; check compatibility.
- Dicaprylyl Carbonate
- Light emollient solvent at 5–15%; mineral oil-free, refreshing feel, low sensitization.
- Candelilla Cera Wax)
- Natural wax for thickening and film formation; provides hardness and shine; use at 1-3%.
- Polyethylene
- Plastic polymer particles for abrasion or film; check EU ban on microplastics in rinse-off products, flush-off only
- Aluminum Starch Octenylsuccinate
- Modified starch absorbent at 1–10%; for powder products, oil-absorbing without heavy feel
- Mica
- Mineral colorant for pearlescence; heavy metal screening required
- Silica
- Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products
- Dimethicone
- Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin
- Dimethicone/Vinyl Dimethicone Crosspolymer
- Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.
- Talc
- Inorganic mineral powder for texture and oil absorption; must be asbestos-free; fineness affects skin feel and safety, avoid inhalation.
- Aqua
- Solvent, main base; microbial control is critical
- Polysilicone-11
- Not decoded yet
- Tin Oxide
- Inorganic mineral pigment providing opacity and suspension; requires skin safety assessment, typically used in sunscreens or powder colorants.
- Triethoxycaprylylsilane
- Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.
- Isoceteth-10
- Not decoded yet
- Hydrogen Dimethicone
- Hydrogenated dimethicone for film-forming and slip; low volatility, rich feel for dry skin
- Methicone
- Volatile silicone offering slip and antistatic properties; inert at high purity, check cyclic isomer limits
- Aluminum Hydroxide
- Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.
- Ci 77007
- Mica-based colorant, restricted use; mineral origin, check heavy metal impurities compliance
- Ci 77891
- Titanium dioxide inorganic pigment and UV filter; assess inhalation risk for nano-forms and EU restrictions
Source: full ingredient list published on the product label, collected 2026-09-20. Ratings are our internal reading, not a regulatory conclusion. · Product page
Want to build one like this? Send an enquiry