laneige Neo Cushion Matte

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water/Aqua/Eau
2. Titanium Dioxide
3. Cyclopentasiloxane
4. Methyl Trimethicone
5. Ethylhexyl Methoxycinnamate
6. Caprylyl Methicone
7. Iron Oxides
8. Polymethyl Methacrylate
9. PEG-10 Dimethicone
10. Propanediol
11. Cyclohexasiloxane
12. Zinc Oxide
13. Trimethylsiloxysilicate
14. Titanium Dioxide
15. Nylon-12
16. Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone
17. Hdi/Trimethylol Hexyllactone Crosspolymer
18. Disteardimonium Hectorite
19. Iron Oxides
20. 1,2-Hexanediol
21. Sodium Chloride
22. Acrylates/Dimethicone Copolymer
23. Aluminum Hydroxide
24. Isopropyl Titanium Triisostearate
25. Acrylates/Ethylhexyl Acrylate/Dimethicone Methacrylate Copolymer
26. Fragrance/Parfum
27. Caprylyl Glycol
28. Bis-PEG-15 Dimethicone/Ipdi Copolymer
29. Stearic Acid
30. PEG-2 Soyamine
31. Ethylhexylglycerin
32. Iron Oxides
33. Disodium EDTA
34. Triethoxycaprylylsilane
35. Silica
36. Citronellol
37. Geraniol
38. Limonene
39. BHT
40. Hydroxycitronellal
41. Tocopherol

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains siliconesContains PEGContains EU-26 allergensContains fragranceContains essential oils

Key ingredients

溶剂

Water/Aqua/Eau

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

SKIN CONDITIONING - EMOLLIENT

Cyclopentasiloxane

HAIR CONDITIONING

Methyl Trimethicone

LIGHT STABILIZER

Ethylhexyl Methoxycinnamate

SKIN CONDITIONING

Caprylyl Methicone

着色剂

Iron Oxides

FILM FORMING

Polymethyl Methacrylate

Other ingredients

PEG-10 DimethiconePropanediolCyclohexasiloxaneZinc OxideTrimethylsiloxysilicateTitanium DioxideNylon-12Lauryl PEG-9 Polydimethylsiloxyethyl DimethiconeHdi/Trimethylol Hexyllactone CrosspolymerDisteardimonium HectoriteIron Oxides1,2-HexanediolSodium ChlorideAcrylates/Dimethicone CopolymerAluminum HydroxideIsopropyl Titanium TriisostearateAcrylates/Ethylhexyl Acrylate/Dimethicone Methacrylate CopolymerFragrance/ParfumCaprylyl GlycolBis-PEG-15 Dimethicone/Ipdi CopolymerStearic AcidPEG-2 SoyamineEthylhexylglycerinIron OxidesDisodium EDTATriethoxycaprylylsilaneSilicaCitronellolGeraniolLimoneneBHTHydroxycitronellalTocopherol

Skim through

Ingredients explained

Water/Aqua/Eau

Primary aqueous solvent and carrier; no specific incompatibilities, focus on microbial stability.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Methyl Trimethicone

Methyl trimethicone, light volatile silicone; non-comedogenic, good powder compatibility.

Ethylhexyl Methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Caprylyl Methicone

Volatile silicone, fresh feel, does not absorb oil, used in foundations and cushions.

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Polymethyl Methacrylate

PMMA for thickening, suspension, and film; micro-size powder carrier, very low irritation

PEG-10 Dimethicone

Modified silicone for silky feel and shine; PEG structure aids O/W emulsification, used in hair and skin care.

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Zinc Oxide

Physical UV filter, 30% max in EU; oily at high levels, pair with oils for feel.

Trimethylsiloxysilicate

Silicate powder, oil-absorbing emollient; insoluble, high levels feel powdery.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Nylon-12

Not decoded yet

Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone

Silicone surfactant at 1–5%; for hair/cleansing, provides smoothness

Hdi/Trimethylol Hexyllactone Crosspolymer

Hydrophobic wax for anti-caking; improves slip in powders and cushions

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Acrylates/Dimethicone Copolymer

Silicone copolymer for anti-caking and film formation, gives non-greasy slip.

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Isopropyl Titanium Triisostearate

Titanium isostearate complex for UVB absorption and emulsification aid; photostable, low irritancy, low comedogenicity.

Acrylates/Ethylhexyl Acrylate/Dimethicone Methacrylate Copolymer

Silicone-modified acrylate for film-forming; silicone-based, non-comedogenic, matte finish.

Fragrance/Parfum

Fragrance mixture for odor; complex composition with potential allergens, use with caution in sensitive or children's products.

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Bis-PEG-15 Dimethicone/Ipdi Copolymer

Not decoded yet

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

PEG-2 Soyamine

Not decoded yet

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Citronellol

Citronellol for fragrance; EU 26 allergen, labeling required above 0.001%.

Geraniol

Geraniol for fragrance; EU 26 allergen, labeling required above 0.001%.

Limonene

Natural fragrance solvent, EU allergen; poor photostability

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Hydroxycitronellal

Hydroxycitronellal, sensitizing fragrance, EU limit <0.1%; avoid use as aerosol propellant.

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Related products in this category

• medicube Medicube Glow Cushion
• innisfree innisfree Pore Blur Powder
• romand Romand Zero Cushion
• innisfree innisfree Matte Mineral Pressed Setting Powder
• abib Abib Hydration Cushion Compact Skin Shield
• skinfood Skinfood Choco Eyebrow Powder Cake