unleashia Glitter Gel
unleashia unleashia Glitter Gel lists 22 ingredients on its label, 20 decoded. See what each one does, its irritancy and comedogenic tendency, and its status in national inventories.
Ingredients overview
Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.
Ingredients are listed in label order; the order reflects the label only, not exact concentrations.
- Water
- Polybutylene Terephthalate
- Diglycerin
- Acrylates Copolymer
- Ethylene/Va Copolymer
- Glycerin
- Acrylates/C10-30 Alkyl Acrylate Crosspolymer
- 1,2-Hexanediol
- Tromethamine
- Ethylhexylglycerin
- Fragrance
- Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
- Disodium EDTA
- Sorbitan Isostearate
- Polysorbate 60
- Synthetic Fluorphlogopite
- Iron Oxides
- Titanium Dioxide
- Silica
- Calcium Aluminum Borosilicate
- Iron Oxides
- Tin Oxide
Highlights
Free of alcoholFree of parabensFree of siliconesFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains EU-26 allergensContains fragranceContains PEG
Key ingredients
- ANTIPLAQUE
- Water
- HUMECTANT
- Diglycerin
- ANTISTATIC
- Acrylates Copolymer
- DENATURANT
- Glycerin
- EMULSION STABILISING
- Acrylates/C10-30 Alkyl Acrylate Crosspolymer
- SKIN CONDITIONING
- 1,2-Hexanediol
- BUFFERING
- Tromethamine
- DEODORANT
- Ethylhexylglycerin
Other ingredients
Polybutylene TerephthalateEthylene/Va CopolymerFragranceHydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate CopolymerDisodium EDTASorbitan IsostearatePolysorbate 60Synthetic FluorphlogopiteIron OxidesTitanium DioxideSilicaCalcium Aluminum BorosilicateIron OxidesTin Oxide
Skim through
| Ingredient | What it does | Irr. · Com. | Rating |
|---|---|---|---|
| Water | ANTIPLAQUE, SKIN CONDITIONING, SOLVENT | 0 · 0 | Green |
| Polybutylene Terephthalate | Not decoded yet | — | — |
| Diglycerin | HUMECTANT, SKIN CONDITIONING | 0 · 0 | Green |
| Acrylates Copolymer | ANTISTATIC, BINDING, FILM FORMING | 0 · – | Green |
| Ethylene/Va Copolymer | Not decoded yet | — | — |
| Glycerin | DENATURANT, HAIR CONDITIONING, HUMECTANT, ORAL CARE, SKIN PROTECTING, SOLVENT, VISCOSITY CONTROLLING, PERFUMING, FRAGRANCE, SKIN CONDITIONING - HUMECTANT | 0 · 0 | Green |
| Acrylates/C10-30 Alkyl Acrylate Crosspolymer | EMULSION STABILISING, FILM FORMING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| 1,2-Hexanediol | SKIN CONDITIONING, SOLVENT | 0 · 0 | Green |
| Tromethamine | BUFFERING, FRAGRANCE · 限制 III/61 | 0 · – | Green |
| Ethylhexylglycerin | DEODORANT, SKIN CONDITIONING | 0 · 0 | Green |
| Fragrance | 矫味剂,增香剂 | — | Yellow |
| Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer | EMULSION STABILISING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Disodium EDTA | CHELATING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Sorbitan Isostearate | SURFACTANT - EMULSIFYING | 0 · 1 | Green |
| Polysorbate 60 | SURFACTANT - EMULSIFYING, SURFACTANT - CLEANSING | 1 · – | Green |
| Synthetic Fluorphlogopite | BULKING, VISCOSITY CONTROLLING | 0 · – | Green |
| Iron Oxides | 着色剂 | 0 · 0 | Green |
| Titanium Dioxide | UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano), the sum shall not exceed the limit given in column g (Maximum concentration in ready for use preparation) · 限制 <empty>; as a constituent of other substances, or in mixtures, in concentrations equal to, or greater than 0.1% by weight; Shall not be placed on the market, or used, as substance or in mixtures in concentrations equal to ot greater than 0.1% by weight; Shall not be used as propellant in aerosols for any use. Aerosols dispenser containing the substance as propellant shall not | 0 · 0 | Yellow |
| Silica | ABRASIVE, ABSORBENT, ANTICAKING, BULKING, OPACIFYING, VISCOSITY CONTROLLING | 0 · 0 | Green |
| Calcium Aluminum Borosilicate | BULKING | 0 · 0 | Green |
| Iron Oxides | 着色剂 | 0 · 0 | Green |
| Tin Oxide | ABRASIVE, BULKING, OPACIFYING, VISCOSITY CONTROLLING | 0 · 0 | Green |
Ingredients explained
- Water
- Primary solvent and base; requires preservative system to prevent microbial growth
- Polybutylene Terephthalate
- Not decoded yet
- Diglycerin
- Diglycerin humectant and conditioner; low viscosity suitable for liquid formulas, very low irritancy.
- Acrylates Copolymer
- Acrylate synthetic polymer for film forming and antistatic; breathable film, control dosage carefully
- Ethylene/Va Copolymer
- Not decoded yet
- Glycerin
- Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives
- Acrylates/C10-30 Alkyl Acrylate Crosspolymer
- Crosspolymer for thickening/film; needs neutralization to pH 7-8 to hydrate, check ion strength.
- 1,2-Hexanediol
- Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives
- Tromethamine
- pH adjuster, alkaline; precise dosing required
- Ethylhexylglycerin
- Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel
- Fragrance
- Fragrance; concentration must control allergen risk, label specific components
- Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
- High-molecular-weight thickener and emulsion stabilizer; requires electrolytes or acid adjustment near isoelectric point for optimal performance.
- Disodium EDTA
- Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy
- Sorbitan Isostearate
- Non-ionic emulsifier (low HLB); typically used in blends, low comedogenicity, soft skin feel.
- Polysorbate 60
- Non-ionic emulsifier and solubilizer for O/W or W/O stability; may cause mild stinging on sensitive skin, typically 1-5%.
- Synthetic Fluorphlogopite
- Mica filler at 1-10%; luster/thickening, inert, verify mineral purity, no public comedogenic data.
- Iron Oxides
- Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.
- Titanium Dioxide
- Physical UV filter and colorant up to 25%; nano form requires attention
- Silica
- Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products
- Calcium Aluminum Borosilicate
- Synthetic powder filler for smooth feel and coverage; inert.
- Iron Oxides
- Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.
- Tin Oxide
- Inorganic mineral pigment providing opacity and suspension; requires skin safety assessment, typically used in sunscreens or powder colorants.
Source: full ingredient list published on the product label, collected 2026-09-19. Ratings are our internal reading, not a regulatory conclusion. · Product page
Want to build one like this? Send an enquiry