sesderma Repaskin Dry Touch Spf 50

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Aqua
2. Octocrylene
3. C12-15 Alkyl Benzoate
4. Polymethyl Methacrylate
5. Ethylhexyl Salicylate
6. Titanium Dioxide
7. Alcohol Denat
8. Butyl Methoxydibenzoylmethane
9. Phenylbenzimidazole Sulfonic Acid
10. Cyclopentasiloxane
11. Glycerin
12. Propanediol
13. Dimethicone
14. Triethanolamine
15. Vp/Eicosene Copolymer
16. Polyglyceryl-3 Polyricinoleate
17. PEG-100 Stearate
18. Glyceryl Stearate
19. Alcohol
20. Aminopropyl Triethoxysilane
21. Arabidopsis Thaliana Extract
22. Camellia Sinensis Leaf Extract
23. Cetearyl Alcohol
24. Cyclohexasiloxane
25. Disodium EDTA
26. Ergothioneine
27. Ethylhexylglycerin
28. Hydrochloric Acid
29. Lecithin
30. Micrococcus Lysate
31. Parfum
32. Phenoxyethanol
33. Plankton Extract
34. Polysilicone-11
35. Polysorbate 20
36. Potassium Sorbate
37. Propylene Glycol
38. Resveratrol Dimethyl Ether
39. Silica
40. Silybum Marianum Extract
41. Sodium Chloride
42. Sodium Cholate
43. Stearic Acid
44. Thermus Thermophillus Ferment
45. Tocopheryl Acetate
46. Xanthan Gum

Highlights

Free of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains alcoholContains siliconesContains PEGContains fragranceContains EU-26 allergens

Key ingredients

SOLVENT

Aqua

LIGHT STABILIZER

OctocryleneEthylhexyl SalicylateButyl Methoxydibenzoylmethane

ANTIMICROBIAL

C12-15 Alkyl Benzoate

FILM FORMING

Polymethyl Methacrylate

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

溶剂

Alcohol Denat

Other ingredients

Phenylbenzimidazole Sulfonic AcidCyclopentasiloxaneGlycerinPropanediolDimethiconeTriethanolamineVp/Eicosene CopolymerPolyglyceryl-3 PolyricinoleatePEG-100 StearateGlyceryl StearateAlcoholAminopropyl TriethoxysilaneArabidopsis Thaliana ExtractCamellia Sinensis Leaf ExtractCetearyl AlcoholCyclohexasiloxaneDisodium EDTAErgothioneineEthylhexylglycerinHydrochloric AcidLecithinMicrococcus LysateParfumPhenoxyethanolPlankton ExtractPolysilicone-11Polysorbate 20Potassium SorbatePropylene GlycolResveratrol Dimethyl EtherSilicaSilybum Marianum ExtractSodium ChlorideSodium CholateStearic AcidThermus Thermophillus FermentTocopheryl AcetateXanthan Gum

Skim through

Ingredients explained

Aqua

Solvent, main base; microbial control is critical

Octocrylene

UV-B absorber and photostabilizer; has concentration limits, consider potential coral toxicity and allergenicity for specific groups.

C12-15 Alkyl Benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Polymethyl Methacrylate

PMMA for thickening, suspension, and film; micro-size powder carrier, very low irritation

Ethylhexyl Salicylate

Ethylhexyl salicylate, UVB absorber; volatile, requires combination with UVA filters for broad spectrum.

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Alcohol Denat

Denatured ethanol; solvent, penetration enhancer, and quick-dry agent; high % may compromise barrier in dry skin.

Butyl Methoxydibenzoylmethane

High-potency UVA filter (Parsol MXX); requires stabilizers and UVB blockers.

Phenylbenzimidazole Sulfonic Acid

UV absorber and light stabilizer; compliant use required, common in sunscreens

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Triethanolamine

Triethanolamine for buffering; restricted, limit concentration to avoid high pH and irritation

Vp/Eicosene Copolymer

Water-soluble film former and thickener; no known irritancy or comedogenic issues.

Polyglyceryl-3 Polyricinoleate

Mild emulsifier for O/W systems; 1-3%, avoid cationic surfactants

PEG-100 Stearate

Non-ionic emulsifier, requires ionics for stability; check PEG for formaldehyde.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Alcohol

Ethanol for solubility/drying at 5-15%; high conc. is drying/irritating, avoid lip/eye, low residue, balance with humectants.

Aminopropyl Triethoxysilane

Not decoded yet

Arabidopsis Thaliana Extract

Arabidopsis thaliana extract, typically used as a plant-derived antioxidant or actives; research-grade ingredient; confirm stability in final formulation

Camellia Sinensis Leaf Extract

Green tea extract for antioxidant/astringent; contains caffeine, possible irritation in sensitive skin.

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Ergothioneine

Ergothioneine, potent antioxidant; 0.01–0.1%, water-soluble, synergizes with Vit C/E.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Hydrochloric Acid

Strong acid for trace pH buffering; use diluted solutions carefully to avoid pH spikes and corrosion.

Lecithin

Phospholipid emulsifier at 1-5%; biocompatible, moisturizing/antioxidant, prone to oxidation (add TBHQ), mild for sensitive skin.

Micrococcus Lysate

Micrococcus ferment lysate with peptides/metabolites; low concentration skin conditioner, ensure sterile process.

Parfum

Fragrance for scent; may contain allergens, caution for sensitive skin, full labeling required.

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Plankton Extract

Plankton extract for skin conditioning; low concentrations typical, ensure source purity to avoid microbial contamination.

Polysilicone-11

Not decoded yet

Polysorbate 20

Non-ionic emulsifier and cleansing surfactant; contains PEG, control microbial load.

Potassium Sorbate

Preservative effective below pH 6; combinable with sodium benzoate

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Resveratrol Dimethyl Ether

Not decoded yet

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Silybum Marianum Extract

Silybum marianum extract containing silymarin, used for skin conditioning and antioxidant

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Sodium Cholate

Not decoded yet

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Thermus Thermophillus Ferment

Probiotic ferment with humectant properties; use as a low-level skin conditioning agent

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Related products in this category

• tropic-skincare Tropic skincare Sun Stick SPF 50
• froika Froika Premium Sunscreen Anti Spot
• zelens Zelens Body Defence Sunscreen Broad Spectrum SPF 30
• beauty-made-easy Beauty Made Easy Love U Summer Lip Balm SPF 15
• eva-skin-clinic Eva Skin Clinic Collagen Facial Sun Block
• natura Natura Gel Creme Protetor Facial Fps 60/ Fpuva 20 Pele Mista A Oleosa Fotoequilíbrio - 50G (2020)