espoir Peach Skin Fitting Base 45 SPF++

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Zinc Oxide
3. Isononyl Isononanoate
4. Butyloctyl Salicylate
5. Titanium Dioxide
6. Trimethylsiloxysilicate
7. Isododecane
8. C12-15 Alkyl Benzoate
9. Methyl Trimethicone
10. Glycerin
11. Acrylates Copolymer
12. Lauryl Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone
13. Niacinamide
14. Propanediol
15. Silica
16. Dimethicone
17. Caprylyl Methicone
18. 1,2-Hexanediol
19. Caesalpinia Spinosa Fruit Extract
20. Centella Asiatica Extract
21. Kappaphycus Alvarezii Extract
22. Prunus Persica Leaf Extract
23. Prunus Persica Flower Extract
24. Sodium Hyaluronate
25. Hyaluronic Acid
26. Disteardimonium Hectorite
27. Pentylene Glycol
28. Polyglyceryl-3 Polyricinoleate
29. Polyhydroxystearic Acid
30. Magnesium Sulfate
31. Acrylates/Stearyl Acrylate/Dimethicone Methacrylate Copolymer
32. Lauryl Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone
33. Triethoxycaprylylsilane
34. Octyldodecanol
35. Aluminum Hydroxide
36. Glyceryl Tribehenate/Isostearate/Eicosandioate
37. Tribehenin
38. Dimethicone/Vinyl Dimethicone Crosspolymer
39. Stearic Acid
40. Polyglyceryl-2 Dipolyhydroxystearate
41. Glyceryl Caprylate
42. Polyglyceryl-4 Isostearate
43. Isopropyl Titanium Triisostearate
44. Trisodium Ethylenediamine Disuccinate
45. Butylene Glycol
46. Caprylic/Capric Triglyceride
47. Tocopherol
48. Hydrogenated Lecithin
49. Ceramide NP
50. Ethylhexylglycerin
51. Ascorbic Acid
52. Iron Oxide Yellow
53. Iron Oxide Red

Highlights

Free of alcoholFree of fragranceFree of parabensFree of sulfatesFree of essential oilsFree of formaldehyde releasersContains mineral oilContains siliconesContains PEGContains animal-derived

Key ingredients

ANTIPLAQUE

Water

ANTIMICROBIAL

Zinc OxideC12-15 Alkyl Benzoate

ANTISTATIC

Isononyl Isononanoate

HAIR CONDITIONING

Butyloctyl Salicylate

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

ANTIFOAMING

Trimethylsiloxysilicate

SKIN CONDITIONING - EMOLLIENT

Isododecane

Other ingredients

Methyl TrimethiconeGlycerinAcrylates CopolymerLauryl Polyglyceryl-3 Polydimethylsiloxyethyl DimethiconeNiacinamidePropanediolSilicaDimethiconeCaprylyl Methicone1,2-HexanediolCaesalpinia Spinosa Fruit ExtractCentella Asiatica ExtractKappaphycus Alvarezii ExtractPrunus Persica Leaf ExtractPrunus Persica Flower ExtractSodium HyaluronateHyaluronic AcidDisteardimonium HectoritePentylene GlycolPolyglyceryl-3 PolyricinoleatePolyhydroxystearic AcidMagnesium SulfateAcrylates/Stearyl Acrylate/Dimethicone Methacrylate CopolymerLauryl Polyglyceryl-3 Polydimethylsiloxyethyl DimethiconeTriethoxycaprylylsilaneOctyldodecanolAluminum HydroxideGlyceryl Tribehenate/Isostearate/EicosandioateTribeheninDimethicone/Vinyl Dimethicone CrosspolymerStearic AcidPolyglyceryl-2 DipolyhydroxystearateGlyceryl CaprylatePolyglyceryl-4 IsostearateIsopropyl Titanium TriisostearateTrisodium Ethylenediamine DisuccinateButylene GlycolCaprylic/Capric TriglycerideTocopherolHydrogenated LecithinCeramide NPEthylhexylglycerinAscorbic AcidIron Oxide YellowIron Oxide Red

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Zinc Oxide

Physical UV filter, 30% max in EU; oily at high levels, pair with oils for feel.

Isononyl Isononanoate

Light, low-viscosity ester emollient; excellent spreadability, good for gels and light lotions

Butyloctyl Salicylate

Oil-soluble exfoliating emollient; avoid for aspirin-sensitive users and high-concentration leave-on products

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Trimethylsiloxysilicate

Silicate powder, oil-absorbing emollient; insoluble, high levels feel powdery.

Isododecane

Synthetic hydrocarbon solvent providing dry, silky skin feel; high volatility, non-comedogenic, common in sunscreens and foundations, usage 5-30%.

C12-15 Alkyl Benzoate

C12-15 alkyl benzoate; emollient, emulsifier, and antistatic; aids stability and smoothness, moderate low comedogenicity.

Methyl Trimethicone

Methyl trimethicone, light volatile silicone; non-comedogenic, good powder compatibility.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Acrylates Copolymer

Acrylate synthetic polymer for film forming and antistatic; breathable film, control dosage carefully

Lauryl Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone

Silicone-modified surfactant providing conditioning and cleansing benefits; used in hair care with low irritancy.

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Propanediol

Polyol solvent at 1–5%; light feel, aids solubilization, propylene glycol alternative

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Caprylyl Methicone

Volatile silicone, fresh feel, does not absorb oil, used in foundations and cushions.

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Caesalpinia Spinosa Fruit Extract

Plant extract for skin protection; contains antioxidants, may need stabilizers at high conc.

Centella Asiatica Extract

Centella asiatica extract for soothing/repair; low irritation, common in sensitive skin products.

Kappaphycus Alvarezii Extract

Seaweed polysaccharide; film forming and moisturizing; provides gel texture; gentle.

Prunus Persica Leaf Extract

Peach leaf extract, used for emollience and moisturizing; a botanical for gentle skin conditioning.

Prunus Persica Flower Extract

Moisturizing and conditioning; floral extract is gentle, offers antioxidants

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Polyglyceryl-3 Polyricinoleate

Mild emulsifier for O/W systems; 1-3%, avoid cationic surfactants

Polyhydroxystearic Acid

Emulsifier and stabilizer at 1–3%; non-ionic, prone to hydrolysis.

Magnesium Sulfate

Bulk agent at 0.1–1%; highly water-soluble, avoid high local concentration.

Acrylates/Stearyl Acrylate/Dimethicone Methacrylate Copolymer

Silicone-modified acrylic copolymer film former; smooth film, limited solubility, low comedogenic risk

Lauryl Polyglyceryl-3 Polydimethylsiloxyethyl Dimethicone

Silicone-modified surfactant providing conditioning and cleansing benefits; used in hair care with low irritancy.

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Octyldodecanol

Light emollient/emulsifier at 1-5%; low comedogenic, non-greasy feel, broadly compatible, sensitive-skin friendly.

Aluminum Hydroxide

Aluminum hydroxide for emollient/thickening; opacifier, used in antiperspirants, particulate risk.

Glyceryl Tribehenate/Isostearate/Eicosandioate

Not decoded yet

Tribehenin

Waxy emollient providing slip; prone to oxidation, needs antioxidant system; good for dry skin.

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Polyglyceryl-2 Dipolyhydroxystearate

Plant-derived emulsifier, mild feel; for O/W systems, combine with co-emulsifiers

Glyceryl Caprylate

Mild emulsifier/deodorant at 0.5-2%; polyol ester, high humectancy, low irritancy, check cationic surfactant compatibility.

Polyglyceryl-4 Isostearate

Emulsifier at 1–5%; mild type, suitable for sensitive skin formulas

Isopropyl Titanium Triisostearate

Titanium isostearate complex for UVB absorption and emulsification aid; photostable, low irritancy, low comedogenicity.

Trisodium Ethylenediamine Disuccinate

Mild chelator replacing EDTA; water-soluble, very low irritation, stabilizes metal ions

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Tocopherol

Natural antioxidant (vitamin E) at 0.1–1%; prone to oxidation, store protected from light

Hydrogenated Lecithin

Emulsifier from lecithin; stable, used in powder emulsions

Ceramide NP

Ceramide N3 for barrier repair; lipophilic, needs oil phase or emulsion, avoid high standalone use.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Ascorbic Acid

Vitamin C, potent antioxidant requiring acidic environment for stability; oxidizes and discolors easily, needs light and air protection, concentration 1-10%, pure L-ascorbic acid is more irritating.

Iron Oxide Yellow

Inorganic yellow pigment for product coloration; functions as a physical cover agent.

Iron Oxide Red

Inorganic red pigment; restricted from use as a propellant in aerosols by regulation.

Related products in this category

• skinfood Skinfood White Dandelion Derma Mild Sun Cushion SPF50 + Pa ++++
• cosrx COSRX Ultra-light Invisible Sunscreen SPF50
• cosrx COSRX Aloe 54.2 Aqua Tone-up Sunscreen
• axis-y Axis-Y Complete No-stress Physical Sunscreen (Ver.3)
• some-by-mi Some By Mi V10 Hyal Hydra Capsule Sunscreen SPF 50+ PA++++
• some-by-mi Some By Mi V10 Hyal Antioxidant Sunscreen SPF 50+ PA++++