mizon Collagen Power Lifting Ex Emulsion

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Butylene Glycol
3. PEG/PPG-17/6 Copolymer
4. Hydrogenated Poly
5. 1,2-Hexanediol
6. Niacinamide
7. Caprylic/Capric Triglyceride
8. Cyclopentasiloxane
9. Cetearyl Olivate
10. Dimethicone
11. Butyrospermum Parkii
12. Cyclohexasiloxane
13. Trehalose
14. Sorbitan Olivate
15. Glyceryl Stearate
16. Cetyl Alcohol
17. Stearyl Alcohol
18. PEG-100 Stearate
19. Palmitic Acid
20. Dimethicone/Vinyl Dimethicone Crosspolymer
21. Stearic Acid
22. Carbomer
23. Triethanolamine
24. Panthenol
25. Hydrolyzed Collagen
26. Adenosine
27. Disodium EDTA
28. Coptis Chinensis Root Extract
29. Propylene Glycol
30. Rubus Idaeus Fruit Extract
31. Sodium Hyaluronate
32. Hydrolyzed Extensin
33. Hyaluronic Acid
34. Ethylhexylglycerin
35. Oenothera Biennis Oil
36. Argania Spinosa Kernel Oil
37. Simmondsia Chinensis
38. Hydrolyzed Hyaluronic Acid
39. Copper Tripeptide-1
40. Palmitoyl Pentapeptide-4
41. Fragrance

Highlights

Free of alcoholFree of parabensFree of sulfatesFree of mineral oilFree of formaldehyde releasersContains PEGContains siliconesContains animal-derivedContains essential oilsContains EU-26 allergensContains fragrance

Key ingredients

ANTIPLAQUE

Water

HUMECTANT

Butylene Glycol

SOLVENT

PEG/PPG-17/6 Copolymer

油相溶剂，柔润剂

Hydrogenated Poly

SKIN CONDITIONING

1,2-Hexanediol

SMOOTHING

Niacinamide

FRAGRANCE

Caprylic/Capric Triglyceride

SKIN CONDITIONING - EMOLLIENT

Cyclopentasiloxane

Other ingredients

Cetearyl OlivateDimethiconeButyrospermum ParkiiCyclohexasiloxaneTrehaloseSorbitan OlivateGlyceryl StearateCetyl AlcoholStearyl AlcoholPEG-100 StearatePalmitic AcidDimethicone/Vinyl Dimethicone CrosspolymerStearic AcidCarbomerTriethanolaminePanthenolHydrolyzed CollagenAdenosineDisodium EDTACoptis Chinensis Root ExtractPropylene GlycolRubus Idaeus Fruit ExtractSodium HyaluronateHydrolyzed ExtensinHyaluronic AcidEthylhexylglycerinOenothera Biennis OilArgania Spinosa Kernel OilSimmondsia ChinensisHydrolyzed Hyaluronic AcidCopper Tripeptide-1Palmitoyl Pentapeptide-4Fragrance

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

PEG/PPG-17/6 Copolymer

Non-ionic copolymer used as a solvent and emulsifier aid; PEG component may increase penetration

Hydrogenated Poly

Hydrogenated poly C6-14 olefins, saturated oil; occlusive, low permeability

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Cetearyl Olivate

Natural emulsifier pairing with glucosides; skin-like feel, biodegradable, prone to oxidation requiring light protection

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Butyrospermum Parkii

African oil/fat/wax; clarify form (oil, butter, or powder) as function depends on it.

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Trehalose

Trehalose; mild humectant and stabilizer for proteins/actives; hygroscopic, light skin feel.

Sorbitan Olivate

O/W emulsifier, HLB ~15, requires ionic co-surfactant, potential sensitizer.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Cetyl Alcohol

Cetyl alcohol for emulsification/thickening; high concentration >10% may irritate.

Stearyl Alcohol

Stearic alcohol; fatty alcohol for emulsion thickening/structure, often blended with soaps, moderate comedogenicity.

PEG-100 Stearate

Non-ionic emulsifier, requires ionics for stability; check PEG for formaldehyde.

Palmitic Acid

Palmitic acid for emulsification/emollient; solid fat, high melting point, occlusive.

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Carbomer

Gelling thickener requiring neutralization; watch out for ion compatibility

Triethanolamine

Triethanolamine for buffering; restricted, limit concentration to avoid high pH and irritation

Panthenol

Panthenol (vitamin B5) at 1–5%; moisturizing and reparative, supports barrier recovery

Hydrolyzed Collagen

Hydrolyzed protein for film-forming and moisture; molecular weight limits penetration, check source for shellfish allergies

Adenosine

Skin conditioner at 0.1-1%; used for anti-aging and repair

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Coptis Chinensis Root Extract

Antioxidant/soothing herb; low concentration usage, yellow color, high dose may be irritating

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Rubus Idaeus Fruit Extract

Raspberry fruit extract with astringent and keratolytic properties; exfoliating, may irritate at high levels

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Hydrolyzed Extensin

Hydrolyzed protein (grape source) for moisture and conditioning; low MW, low allergy risk.

Hyaluronic Acid

High-water-binding humectant at 0.1-1%; high-MW for surface film, low-MW for dermal potential, check cationic compatibility.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Oenothera Biennis Oil

Natural oil rich in GLA; supports barrier, prone to oxidation, needs antioxidants

Argania Spinosa Kernel Oil

Jojoba oil rich in unsaturated fats; good penetration, non-comedogenic, prone to oxidation requiring antioxidants

Simmondsia Chinensis

Not decoded yet

Hydrolyzed Hyaluronic Acid

Low-MW humectant with superior penetration vs high-MW; 0.1-0.5% typical, hygroscopic, store dry to prevent clumping.

Copper Tripeptide-1

Copper Tripeptide-1 (GHK-Cu) for repair/anti-aging at 0.01–0.1%; water-soluble, avoid chelators.

Palmitoyl Pentapeptide-4

Signal peptide promoting collagen synthesis; effective at low concentration, needs penetration enhancers or encapsulation

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Related products in this category

• alverde alverde Face Oil Gesichts-Öl Bio Wildrose
• lerbolario L'Erbolario Aromatic Linden Flower Water
• lvly LVLY Soft Cleansing Foam
• garnier Garnier Bio Purifying Gel Wash With Fresh Lemongrass
• lvly LVLY Day Cream With Manuka Honey Extract
• labo Labo Fillerina Olhos E Lábios 2