Tom Ford full coverage waterproof concealer and foundation

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water\Aqua\Eau
2. Dimethicone
3. Methyl Trimethicone
4. Dimethicone Silylate
5. Butylene Glycol
6. Neopentyl Glycol Diheptanoate
7. Phenyl Trimethicone
8. Polymethyl Methacrylate
9. PPG-12/Smdi Copolymer
10. Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone
11. PEG-10 Dimethicone
12. Tocopheryl Acetate
13. Sodium Hyaluronate
14. Lecithin
15. Caffeine
16. Triethyl Citrate
17. Methicone
18. Laureth-7
19. Silica
20. Magnesium Aluminum Silicate
21. Triethoxycaprylylsilane
22. Polysilicone-11
23. Xanthan Gum
24. Sodium Chloride
25. Dimethicone/PEG-10/15 Crosspolymer
26. Disteardimonium Hectorite
27. Caprylyl Glycol
28. Hexylene Glycol
29. Zinc Stearate
30. Disodium EDTA
31. Phenoxyethanol
32. Potassium Sorbate
33. Sodium Dehydroacetate
34. Mica
35. Titanium Dioxide
36. Iron Oxides
37. Iron Oxides
38. Iron Oxides

Highlights

Free of alcoholFree of fragranceFree of parabensFree of sulfatesFree of mineral oilFree of essential oilsFree of formaldehyde releasersContains siliconesContains PEG

Formulation view O/W makeup system rich in silicones for a smooth finish. PMMA and alumina provide long-wear coverage, while hyaluronic acid and caffeine add care. Factory note: Mature pigment technology ensures waterproofing, ideal for all-day coverage on combination or oily skin types.

Key ingredients

溶剂

Water\Aqua\Eau

ANTIFOAMING

DimethiconeDimethicone SilylatePhenyl Trimethicone

HAIR CONDITIONING

Methyl Trimethicone

HUMECTANT

Butylene Glycol

SKIN CONDITIONING - EMOLLIENT

Neopentyl Glycol Diheptanoate

FILM FORMING

Polymethyl Methacrylate

Other ingredients

PPG-12/Smdi CopolymerLauryl PEG-9 Polydimethylsiloxyethyl DimethiconePEG-10 DimethiconeTocopheryl AcetateSodium HyaluronateLecithinCaffeineTriethyl CitrateMethiconeLaureth-7SilicaMagnesium Aluminum SilicateTriethoxycaprylylsilanePolysilicone-11Xanthan GumSodium ChlorideDimethicone/PEG-10/15 CrosspolymerDisteardimonium HectoriteCaprylyl GlycolHexylene GlycolZinc StearateDisodium EDTAPhenoxyethanolPotassium SorbateSodium DehydroacetateMicaTitanium DioxideIron OxidesIron OxidesIron Oxides

Skim through

Ingredients explained

Water\Aqua\Eau

Solvent and diluent; the base for most aqueous formulations.

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Methyl Trimethicone

Methyl trimethicone, light volatile silicone; non-comedogenic, good powder compatibility.

Dimethicone Silylate

Siloxane; used for defoaming and skin feel; low allergenicity, may clog pores, cautious for oily skin.

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Neopentyl Glycol Diheptanoate

Light emollient ester, non-greasy, improves product spreadability.

Phenyl Trimethicone

Aromatic modified silicone for high gloss and occlusion; inert, non-volatile, may leave surface residue

Polymethyl Methacrylate

PMMA for thickening, suspension, and film; micro-size powder carrier, very low irritation

PPG-12/Smdi Copolymer

Film former, hair styling, volatile, dry touch, non-comedogenic.

Lauryl PEG-9 Polydimethylsiloxyethyl Dimethicone

Silicone surfactant at 1–5%; for hair/cleansing, provides smoothness

PEG-10 Dimethicone

Modified silicone for silky feel and shine; PEG structure aids O/W emulsification, used in hair and skin care.

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Sodium Hyaluronate

Potent humectant at 0.1–2%; different MW for penetration depth, high levels may draw moisture

Lecithin

Phospholipid emulsifier at 1-5%; biocompatible, moisturizing/antioxidant, prone to oxidation (add TBHQ), mild for sensitive skin.

Caffeine

Active ingredient, 0.1–2%; promotes circulation, irritation risk at high concentration.

Triethyl Citrate

Solvent/plasticizer at 1–10%; provides fresh feel, slight citrus scent

Methicone

Volatile silicone offering slip and antistatic properties; inert at high purity, check cyclic isomer limits

Laureth-7

Mild non-ionic surfactant for emulsification and solubilization; biodegradable

Silica

Silica powder at 1–10%; absorbs oil, thickens, provides matte finish, for oil-control products

Magnesium Aluminum Silicate

Oil-absorbing powder at 5–20%; for pressed/powder makeup, high levels may feel heavy

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Polysilicone-11

Not decoded yet

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Dimethicone/PEG-10/15 Crosspolymer

Silicone/PEG crosspolymer for film forming and viscosity; low irritation; PEG debate at high conc

Disteardimonium Hectorite

Inorganic ionic clay thickener at 0.25-1%; water/oil/solvent systems, rheology control, avoid strong acids, may affect active release.

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Hexylene Glycol

Polyol solvent and humectant with penetration enhancement; limit concentration to avoid irritation, no specific allergen tag

Zinc Stearate

Powder slip and dispersing agent for cosmetic powders; insoluble in water/oil.

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Potassium Sorbate

Preservative effective below pH 6; combinable with sodium benzoate

Sodium Dehydroacetate

Sodium dehydroacetate, preservative <0.5%; restricted for eye, children, and lip use.

Mica

Mineral colorant for pearlescence; heavy metal screening required

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Iron Oxides

Inorganic pigment for color; particulate form, inhalation risk low in cosmetics.

Related products in this category

• avon Avon Mark MagiX Setting Spray
• korres Korres Lip Oil
• makeup-revolution Makeup Revolution Conceal & Define Full Coverage Foundation
• elizabeth-arden Elizabeth Arden Beautiful Color Radiance Blush
• elizabeth-arden Elizabeth Arden High Performance Blurring Loose Powder
• elizabeth-arden Elizabeth Arden Flawless Finish Skincaring Concealer