nature-e Natur-e White Hand & Body Serum

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Mineral Oil
3. Glycerin
4. Niacinamide
5. Caprylic/Capric Triglyceride
6. Cyclopentasiloxane
7. Stearyl Alcohol
8. Glyceryl Stearate
9. Cetyl Alcohol
10. Cyclohexasiloxane
11. Dimethicone
12. Titanium Dioxide
13. PEG-100 Stearate
14. Fragrance
15. Ethylhexyl Methoxycinnamate
16. Phenoxyethanol
17. PEG-10 Dimethicone
18. Caprylyl Glycol
19. Mannitol
20. Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer
21. Carbomer
22. Microcrystalline Cellulose
23. Isohexadecane
24. Tocopheryl Acetate
25. Potassium Hydroxide
26. Xanthan Gum
27. Methylene Bis-Benzotriazolyl Tetramethylbutylphenol
28. Ethylhexylglycerin
29. Polysorbate 80
30. Disodium EDTA
31. Triethoxycaprylylsilane
32. Butyrospermum Parkii Butter
33. Squalene
34. Decyl Glucoside
35. Sorbitan Oleate
36. Myristyl Alcohol
37. Lauryl Alcohol
38. Glutathione
39. Hydrogenated Ethylhexyl Olivate
40. Hydrogenated Olive Oil Unsaponifiables
41. Hydroxypropyl Methylcellulose
42. Propylene Glycol
43. Melissa Officinalis Leaf Extract
44. Mallow Extract
45. Achillea Millefolium Extract
46. Alchemilla Vulgaris Extract
47. Primula Veris Extract
48. Mentha Piperita Leaf Extract
49. Veronica Officinalis Extract
50. BHT
51. Ci 77491

Highlights

Free of alcoholFree of sulfatesFree of formaldehyde releasersContains mineral oilContains siliconesContains PEGContains EU-26 allergensContains fragranceContains parabensContains animal-derivedContains essential oils

Formulation view O/W cream with mineral oil, glycerin, and niacinamide for occlusion and conditioning. Silicone complex provides slip; titanium dioxide improves appearance. Enriched with glutathione and olive oil unsaponifiables for antioxidant support. Suitable for body and dry skin. Formulator note: Mineral oil-silicone pairing offers strong occlusion; niacinamide and glutathione synergy is noted, monitoring high-dose tolerance.

Key ingredients

ANTIPLAQUE

Water

SKIN CONDITIONING - EMOLLIENT

Mineral OilCyclopentasiloxaneStearyl AlcoholGlyceryl Stearate

DENATURANT

Glycerin

SMOOTHING

Niacinamide

FRAGRANCE

Caprylic/Capric Triglyceride

Other ingredients

Cetyl AlcoholCyclohexasiloxaneDimethiconeTitanium DioxidePEG-100 StearateFragranceEthylhexyl MethoxycinnamatePhenoxyethanolPEG-10 DimethiconeCaprylyl GlycolMannitolSodium Acrylate/Sodium Acryloyldimethyl Taurate CopolymerCarbomerMicrocrystalline CelluloseIsohexadecaneTocopheryl AcetatePotassium HydroxideXanthan GumMethylene Bis-Benzotriazolyl TetramethylbutylphenolEthylhexylglycerinPolysorbate 80Disodium EDTATriethoxycaprylylsilaneButyrospermum Parkii ButterSqualeneDecyl GlucosideSorbitan OleateMyristyl AlcoholLauryl AlcoholGlutathioneHydrogenated Ethylhexyl OlivateHydrogenated Olive Oil UnsaponifiablesHydroxypropyl MethylcellulosePropylene GlycolMelissa Officinalis Leaf ExtractMallow ExtractAchillea Millefolium ExtractAlchemilla Vulgaris ExtractPrimula Veris ExtractMentha Piperita Leaf ExtractVeronica Officinalis ExtractBHTCi 77491

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Mineral Oil

Occlusive emollient preventing water loss; must use high-purity medical grade to avoid impurities.

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Niacinamide

Niacinamide at 2–5%; improves texture, controls oil, brightens; high levels may cause sensitivity

Caprylic/Capric Triglyceride

Light occlusive and solvent at 1–10%; non-greasy feel, suitable for oily and combination skin

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Stearyl Alcohol

Stearic alcohol; fatty alcohol for emulsion thickening/structure, often blended with soaps, moderate comedogenicity.

Glyceryl Stearate

Emulsifier at 1-3%; may require acid to prevent saponification

Cetyl Alcohol

Cetyl alcohol for emulsification/thickening; high concentration >10% may irritate.

Cyclohexasiloxane

Volatile cyclic silicone evaporating without residue; ensure compliance with EU limits on cyclic polydimethylsiloxanes, use octamer

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

PEG-100 Stearate

Non-ionic emulsifier, requires ionics for stability; check PEG for formaldehyde.

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Ethylhexyl Methoxycinnamate

UVA absorber used with other filters; poor water stability and photolability, requires light stabilizers, max concentration typically 10%.

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

PEG-10 Dimethicone

Modified silicone for silky feel and shine; PEG structure aids O/W emulsification, used in hair and skin care.

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Mannitol

Polyol humectant with binding/skin conditioning properties; high levels may cause osmotic irritation

Sodium Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Acrylate copolymer for film/thickening; water-soluble, compatible, monitor residual monomers.

Carbomer

Gelling thickener requiring neutralization; watch out for ion compatibility

Microcrystalline Cellulose

Cellulose derivative for anti-caking, oil absorption, and physical sunscreen carrier; water-insoluble, affects texture at high levels.

Isohexadecane

Lightweight mineral-oil-derived emollient and solvent; low viscosity, non-comedogenic, improves texture

Tocopheryl Acetate

Vitamin E derivative antioxidant at 0.1–1%; more stable than tocopherol, store protected from light

Potassium Hydroxide

Strong alkali pH adjuster, trace usage (<0.1%); corrosive, must be neutralized.

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Methylene Bis-Benzotriazolyl Tetramethylbutylphenol

UV stabilizer (UV-326/328) preventing photo-degradation of formulas; has EU concentration limit, used in sunscreens.

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Polysorbate 80

Non-ionic emulsifier and solubilizer; watch for interaction with parabens

Disodium EDTA

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Triethoxycaprylylsilane

Silane coupling agent at 0.1-0.5%; enhances inorganic filler adhesion, trace use, low toxicity, avoid direct contact with aqueous systems.

Butyrospermum Parkii Butter

Shea butter for occlusive moisturizing; high melt point, rich texture, caution for oily skin.

Squalene

Squalene, lightweight emollient, easily absorbed; animal sources restricted, plant sources preferred

Decyl Glucoside

Mild alkyl glucoside, biodegradable; foam stabilizer, thickens with fatty alcohols, low allergenicity.

Sorbitan Oleate

Non-ionic emulsifier for oil-in-water systems; plant-derived, check oxidative stability

Myristyl Alcohol

Long-chain fatty alcohol for emulsion stability and conditioning; slippery feel, low sensitization, common in creams.

Lauryl Alcohol

Fatty alcohol for emulsifying and thickening; low comedogenic, mild irritation possible on dry sensitive skin.

Glutathione

Antioxidant and brightening agent; unstable, requires antioxidants and protection from light.

Hydrogenated Ethylhexyl Olivate

Emollient ester and emulsifier; provides silky feel in O/W systems, generally mild and non-irritating

Hydrogenated Olive Oil Unsaponifiables

Oleic unsaponifiables (squalane/phytane); heavy-duty emollients suitable for dry, damaged skin repair

Hydroxypropyl Methylcellulose

High polymer for thickening and film formation; water-soluble, used in physical sunscreens or gels, tacky at high levels

Propylene Glycol

Polyol humectant at 3-10%; hygroscopic, slight tackiness, mild irritation at high conc., verify preservative efficacy, no allergen.

Melissa Officinalis Leaf Extract

Lemon balm extract for soothing; volatile oils, low allergy risk, light sensitive.

Mallow Extract

Not decoded yet

Achillea Millefolium Extract

Yarrow extract; chrysogenic content for soothing; contains essential oil components, assess phototoxicity and allergens

Alchemilla Vulgaris Extract

Lady's mantle extract; botanical astringent, used in skin care and soothing formulas, low concentration.

Primula Veris Extract

Primrose extract, anti-irritation; 0.1–0.5% typical, data limited, sensitization caution

Mentha Piperita Leaf Extract

Mint extract for cooling sensation; contains menthol, mild irritation potential.

Veronica Officinalis Extract

Veronica officinalis extract, soothing and anti-inflammatory; botanical extract, potential allergy in some individuals

BHT

Lipophilic antioxidant at 0.01-0.05%; ineffective with acidic systems, label-sensitive, check regulatory limits as preservative alternative.

Ci 77491

Iron oxides red; physical pigment. Coloring and photo-protective, stable and non-irritating.

Related products in this category

• elmt elmt Gentle Exfoliating Solution
• tommi-skin tommi skin Night Shift Serum
• dr-lewinns DR. LEWINN'S Eternal Youth Day & Night Serum
• clean-beauty Clean Beauty Witch Hazel Smoothing Facial Toner
• skindays Skindays Hyaluronic Acid + B5 Serum
• the-perfect-derma The Perfect Derma Hyaluronic Perfection Serum