apieu A'pieu Stone Peach Pore Less Bubble Mask

Ingredients overview

Label order. Colour is our internal rating: green routine, yellow restricted or worth a look, red prohibited or high-risk, grey not yet decoded.

Ingredients are listed in label order; the order reflects the label only, not exact concentrations.

1. Water
2. Kaolin
3. Bentonite
4. Sodium Cocoyl Isethionate
5. Glycerin
6. Titanium Dioxide
7. Stearic Acid
8. Prunus Davidiana Fruit Extract
9. Cetearyl Alcohol
10. Cetyl Ethylhexanoate
11. Paeonia Suffruticosa Flower Water
12. Butylene Glycol
13. Methyl Perfluorobutyl Ether
14. Methyl Perfluoroisobutyl Ether
15. Pentylene Glycol
16. Fragrance
17. Glyceryl Stearate Se
18. Magnesium Aluminum Silicate
19. Phenoxyethanol
20. Potassium Hydroxide
21. Caprylyl Glycol
22. Polyacrylamide
23. Methylpropanediol
24. Sodium Sweetalmondamphoacetate
25. Ethylhexylglycerin
26. Allantoin
27. C13-14 Isoparaffin
28. Cyclopentasiloxane
29. Xanthan Gum
30. Dimethicone
31. 1,2-Hexanediol
32. Sodium Chloride
33. Hydrogenated Lecithin
34. Dimethicone/Vinyl Dimethicone Crosspolymer
35. Laureth-7
36. Sucrose Distearate
37. Disodium Edta
38. Mica
39. Montmorillonite

Highlights

Free of parabensFree of sulfatesFree of essential oilsFree of formaldehyde releasersContains EU-26 allergensContains fragranceContains alcoholContains mineral oilContains siliconesContains animal-derivedContains PEG

Formulation view This mud mask relies on kaolin and bentonite for adsorption, paired with mild surfactants and menthol for foam. Volatile perfluorinated ethers are added to counteract heaviness, suitable for oily skin post-cleansing. Factory view: perfluorochemicals pose REACH compliance risks; consider replacing with conventional volatile silicones or esters for safer, sustainable manufacturing.

Key ingredients

ANTIPLAQUE

Water

ABRASIVE

Kaolin

ABSORBENT

Bentonite

CLEANSING

Sodium Cocoyl IsethionateStearic Acid

DENATURANT

Glycerin

UV FILTER · 附录 VI · 最高浓度 25%* *: In case of combined use of Titanium Dioxide and Titanium Dioxide (nano)

Titanium Dioxide

SKIN CONDITIONING - EMOLLIENT

Cetearyl Alcohol

Other ingredients

Prunus Davidiana Fruit ExtractCetyl EthylhexanoatePaeonia Suffruticosa Flower WaterButylene GlycolMethyl Perfluorobutyl EtherMethyl Perfluoroisobutyl EtherPentylene GlycolFragranceGlyceryl Stearate SeMagnesium Aluminum SilicatePhenoxyethanolPotassium HydroxideCaprylyl GlycolPolyacrylamideMethylpropanediolSodium SweetalmondamphoacetateEthylhexylglycerinAllantoinC13-14 IsoparaffinCyclopentasiloxaneXanthan GumDimethicone1,2-HexanediolSodium ChlorideHydrogenated LecithinDimethicone/Vinyl Dimethicone CrosspolymerLaureth-7Sucrose DistearateDisodium EdtaMicaMontmorillonite

Skim through

Ingredients explained

Water

Primary solvent and base; requires preservative system to prevent microbial growth

Kaolin

Kaolin absorbent and bulk for powders/masks; check for heavy metals and comply with EU colorant limits IV/119

Bentonite

Natural clay for oil absorption in masks or thickening; no allergenicity, ensure high purity batches

Sodium Cocoyl Isethionate

Mild cleanser with rich lather and low irritation; hygroscopic, requires moisture-resistant packaging

Glycerin

Workhorse humectant at 3–10%; tacky at high levels, pair with occlusives

Titanium Dioxide

Physical UV filter and colorant up to 25%; nano form requires attention

Stearic Acid

Fatty acid emulsifier, white waxy solid; adds slip feel

Prunus Davidiana Fruit Extract

Not decoded yet

Cetearyl Alcohol

Fatty alcohol emulsifier at 1-5%; non-ionic surfactant

Cetyl Ethylhexanoate

Synthetic oil providing slip; large molecule, low penetration, non-comedogenic, suitable for dry or rough skin.

Paeonia Suffruticosa Flower Water

Not decoded yet

Butylene Glycol

Polyol humectant and solvent at 1–5%; aids solubilization, light feel

Methyl Perfluorobutyl Ether

Perfluoroether solvent; rapid evaporation, oil-free; high volatility at low temp; pair with odor-masking.

Methyl Perfluoroisobutyl Ether

Perfluoroether solvent; high volatility for sprays/fast-dry; check environmental restrictions.

Pentylene Glycol

Polyol humectant at 1-3%; low irritancy, suitable for sensitive skin

Fragrance

Fragrance; concentration must control allergen risk, label specific components

Glyceryl Stearate Se

Emulsifier at 1–3%; oil-phase ingredient, easy emulsification, low sensitization.

Magnesium Aluminum Silicate

Oil-absorbing powder at 5–20%; for pressed/powder makeup, high levels may feel heavy

Phenoxyethanol

Broad-spectrum preservative at ≤1%; may irritate sensitive eye areas, often paired with ethylhexylglycerin

Potassium Hydroxide

Strong alkali pH adjuster, trace usage (<0.1%); corrosive, must be neutralized.

Caprylyl Glycol

Polyol conditioner and preservative booster at 0.5–3%; emollient feel, often paired with 1,2-hexanediol

Polyacrylamide

Film former and thickener for slip and feel; acrylamide monomer residue risk, strict QC required, restriction III/66

Methylpropanediol

Diol solvent and extraction carrier; enhances solubility of actives, low irritation profile.

Sodium Sweetalmondamphoacetate

Not decoded yet

Ethylhexylglycerin

Mild conditioner and preservative booster at 0.5–1%; reduces preservative load, smooth feel

Allantoin

Skin soother at 0.5-2%; promotes cell regeneration

C13-14 Isoparaffin

Light hydrocarbon solvent providing emolliency and solubility; non-allergenic, note occlusive nature

Cyclopentasiloxane

Cyclopentasiloxane for emollient/solvent; volatile silicone, smooth feel, check VOC regulations.

Xanthan Gum

Natural thickener at 0.1–1%; provides gel texture, pH-stable, requires full hydration

Dimethicone

Silicone occlusive at 1–5%; provides smooth feel, non-penetrating, suitable for sensitive skin

1,2-Hexanediol

Polyol solvent and preservative booster at 1–5%; light feel, can replace some traditional preservatives

Sodium Chloride

Salt for gel viscosity control; used as precipitant in soaps

Hydrogenated Lecithin

Emulsifier from lecithin; stable, used in powder emulsions

Dimethicone/Vinyl Dimethicone Crosspolymer

Crosslinked silicone thickener at 0.5-2%; silky/matte feel, non-comedogenic, partial oil phase incompatibility, use co-solvent/pre-emulsification.

Laureth-7

Mild non-ionic surfactant for emulsification and solubilization; biodegradable

Sucrose Distearate

Nonionic emulsifier and emollient at 1–3%; biodegradable, low irritancy, for mild cleansing and emulsions

Disodium Edta

Chelating agent at 0.05–0.5%; sequesters metal ions for stability, boosts preservative efficacy

Mica

Mineral colorant for pearlescence; heavy metal screening required

Montmorillonite

Not decoded yet

Related products in this category

• skinesque Skinesque Deep Sleep Overnight Mask
• kose-cosmeport Kose Cosmeport Princess Veil Pure White Mask
• ily ILY Peach Face Mask Sachet
• etude-house Etude House 0.2 Air Mask Hyaluronic Acid Face Mask
• rohto-mentholatum-hada-labo Rohto Mentholatum Hada Labo Koi-gokujyun 3d Lift Perfect Mask
• care-beauty-line Care & Beauty Line Face Mud Mask